In elements 12 how to print borderless on custom paper size

how do I get rid of margins on custom paper printing so the print is borderless?

Paul,
I have an older version of PSE, but I doubt that they have changed the print dialog.
In Editor, go to File>Print, and on the bottom of the screen there is "More Options". Click on that to get to the "Custom Print Size" tab.. Check "Scale to Fit Media." Does that work?
Have a look at the "Printing Choices" tab as well. Is everything unchecked under "Border?"

Similar Messages

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly.
Can you please help me with this problem immediately? Reply soon...

Hi RajeshPujara,
Please refer the link below to know the paper size supported by this printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
May I know the size of paper you are trying to print.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Photosmart C410: How do I associate a custom paper size with the photo tray?

Our Photosmart 3310 recently broke down and I purchased a C410 to replace it. I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes. With the 3310, I had figured out a way to print the envelopes from the photo tray. While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
One of the reasons I got the C410 was for the photo tray. It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope. Well, unfortunately, that's what I've been doing. I select the photo tray in Word, but the printer goes right ahead and prints from the main tray. I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
My problem is that the software interface for the C410 is different than that for the 3310. I can't figure out how to associate a custom paper size with the photo tray. To test my theory this evening, I told Word that my envelope size was 5 x 7. The printer didn't hesitate to take an envelope from the photo tray. Of course the return address went into a dark void because the envelope is not 5 x 7.
The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets." The C410 only has printing shortcuts.
If anyone can help me, I'll be very grateful! I've probably spent hours trying to get this figured out, and I have no idea what to do.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Envy 5530 - how do you add a custom paper size

I'd like to add two custom paper sizes; Halfsheet (8.5" x 5.5") Portrait and Halfsheet (5.5" x 8.5") Landscape. I create lots of invitations and thank you cards, and have been unsuccessful in figuring out how to add these special or "custom" sizes to my printer. I end up taking my paper to a friends home to print them so I need to figure out how to remedy the problem. Any help would be greatly appreciated. I have Windows 8 if that helps.

Hi there,
Great question. This document on the hp support site should get you started. Once the page opens, click on the + sign next to Windows 8 and follow the instructions.
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

B9180 Win 8 Print Prefs - no "Custom" paper size option

After moving to Windows 8, and loading the current driver, When I go to Print Preferences > Paper size options the dropdown box does not show "Custom". Current paper suzesare listed, with "More" below the line. Under XP, "Custom" was below the line and "More" was above the line. So the way it sits, there is now way to add a custom paper size. Am I missing soething?
This question was solved.
View Solution.

Hi RTKnu,
I would be happy to help you, but I will need to know which Printer you have. There are different version of the software and knowing what printer model you have will help me assist you more efficiently. How Do I Find My Model Number or Product Number?
Can you also please tell me which program you are printing from, and if this issue is occurring from all programs you try to print from?
I look forward to hearing back from you. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do i select a custom paper size on the 6500A , specifics 18cmX26cm

I want to print on a specific paper size, 18cmX26cm. The suggestions from microsoft don't accuratly display my features or windows or the tabs that they say to click. Also your forums seem to mislead the same information. For the money I paid for this printer is not what I expected and very disappointed. The lack of info is appalling, and confusing and just down right frustrating, leading me to conclude that your all as crazy as I am for trying to do something over and over, and expecting different results.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Portrait printing problem on custom paper size

Hi,
i want to print on custom paper size - 500x700mm, but cant set custom paper size straight in Illustrator, only in printer driver. When I set it up and print file, all shapes are smaller on print than in file! Same thing happens with 320x450mm size. After some searching i tried to print it in landscape (wider side in printer) and everything is ok!!! but when i get back to portrait it is all smaller again :/
On pre-intalled A4 size everything is ok.
Can anyone help me, i want to print on 700x500mm but my printer is only 600mm wide ;/
Tried to change any possible fit, resize and rotate option throughout app, system and in printer with no success.
Specs:
Mac OS 10.9 (Retina MBP 15)
Illustrator CC and CS5 (tried on both)
HP DesignJet 510 (CH336A)

Yeah, HP tech support is iffy at best.
I think you're on the right track.
I don't think the issue is Illustrator. In my experience, the Art Board feature is exactly what is warranted for custom page sizes.
I also wouldn't think it is an OS issue, as the drivers need to conform to OS development rules. If the driver "says" it can do it, it SHOULD do it. If it doesn't, that's not the OS's fault.
In cases where you're trying to go "outside" the page-size presets of the printer driver, this is where people encounter problems, which is why I think the issue is the print driver. My solution has been to use an existing page-size preset, and hand-trim after printing. But in quantity prints, this becomes a pretty serious problem.
One other thought. Someone else on this forum found that they could use custom page sizes (with certain printers) if they always fed the paper in its "tall" position, rather than feeding it in "wide." This might require you to rotate artwork in ai, I'm not sure. But it's worth a try in attempting to get your custom page size to print properly.
Good luck.

How do i add a custom paper size to an hp deskjet 3000 j310 series?

I'm using the printer with Windows 7. Trying to print on 5.5" by 8.5" paper, which is not displayed under paper size in properties (Paper/Quality tab). I don't see a way of adding custom sizes.I thought maybe the custom check box under the same Paper/Quality tab might have something to do with it, but it's grayed out, and, in any case, it looks like it relates to changing the print quality, not the size.

Hi there,
According to the product specifications located here the paper size is not supported.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

InDesign 6 not allowing me to "print booklet" to custom paper size...

I had to switch to a mac over the weekend (my windows CPU's power supply went out), causing me to have to download CS6 trial versions of programs I had grown accustomed to from CS5.1 on windows. Anyways, doing my magazine for class in InDesign 6 and I got to the part where I need to "print booklet", and turn it into a postscript file. I did everything the way I was supposed to and then look at the PDF after distilling, and only half of the page shows. The PPD option where you can choose "Adobe PDF" is not showing any other option than "Device Independent". I can't customize the size of the paper from anything except 8 1/2 x 11 which is too small. I need 11x14. I don't know what to do and I've been trying to find solutions... I definitely do not want to have to re-do the whole thing because of this simple little thing, and I am running out of time (only have about 2-3hrs left). Please help... Thanks

You need to download and install the ADPDF9.PPD file if you want to print to PDF using Print Booklet. You can find more in this article: Creating PostScript Files in Snow Leopard for Older Print Workflows | InDesignSecrets. Another alternative is to use a script to impose your booklet and then export to PDF for printing, or you may want to look at the IDImposer plugin, normall $49, but offered free until the end of this month: Overview | IDImposer

Help with Java Printing-Custom paper sizes

Hi,
I'm trying to print documents with custom paper sizes out of java.
I can print fine when I don't try to set the MediaSize to a custom size or when I use already named constants like: "MediaSizeName.JIS_B4"
The error message I get is this:
java.lang.ClassCastException
     at javax.print.attribute.AttributeSetUtilities.verifyAttributeValue(Unknown Source)
     at javax.print.attribute.HashAttributeSet.add(Unknown Source)
     at hello.Printy.printDocument(Printy.java:103)
     at hello.Printy.main(Printy.java:135)
The offending line(103) looks like this:
pras.add(new MediaSize(1,10,MediaSize.INCH ));The function that its from looks like this:
public void printDocument()
try
          System.out.println("input file name is");
     System.out.println(inputFileName);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService printService[] = PrintServiceLookup.lookupPrintServices(flavor, pras);
PrintService defaultService = PrintServiceLookup.lookupDefaultPrintService();
PrintService printPrintService = null;
// didn't work pras.add(new MediaSize(1,10,MediaSize.INCH) );
PrintService service = ServiceUI.printDialog(null, 200, 200,printService, defaultService, flavor, pras);
if (service != null)
     System.out.println("There is a service aunty-may!!");
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(getInputFileName());
DocAttributeSet das = new HashDocAttributeSet();
//pras.add(new MediaSize((float)3.25, (float)4.75, Size2DSyntax.INCH ) );
// - works
//pras.add(MediaSizeName.JIS_B4);
pras.add(new MediaSize(1,10,MediaSize.INCH ));
//pras.add(new MediaSize(1,10,MediaSize.INCH) );
     System.out.println("Doc has been set to custom size");
Doc doc = new SimpleDoc(fis, flavor, null);
job.print(doc, pras);
     System.out.println("any doc for you?");
catch (Exception e)
e.printStackTrace();
}Any help with this would be greatly appreciated. I'm new to java but I've programmed a bunch in c++.

Hmm ... no real help, but I found this note in the API:
MediaSize is not yet used to specify media. Its current role is as a mapping for named
media (see MediaSizeName). Clients can use the mapping method
MediaSize.getMediaSizeForName(MediaSizeName) to find the physical dimensions of
the MediaSizeName instances enumerated in this API. This is useful for clients which
need this information to format & paginate printing.

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other comp

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other computers who have adobe pro installed?

your right.. i ment acrobat pro :-)
my problem is that i use the PDF printer to export CAD drawings as PDF´s.
As it is now, there are some pre-defined page sizes in the print settings, and i know i can add custom pages manually one at a time.
What i want is to copy the list of my danish standard page sizes, and use them on my other versions of acrobat.
Its like 70 different sizes, and i have them made manually on my current computer, but i hope its possible to copy the list to other computers.
Maby its some script where i can define the sizes, and then copy to another computer. Im just not that much of a computer genius :-)
Hope i got through this without to many spelling mistakes...
Thanks for helping.

How do I get OS X to ask printer for custom paper size

I am printing postcards. These are 1/4 of a letter sheet, or 5.5" wide x 4.25" tall.
I have a commercial grade HP Laserjet 4350, and I've configured that size in its custom menu for tray 1 (the envelope feeder tray). The printer is happy.
I've also set a custom paper size in the MacOS, that I've called "Postcard Quarterpage" and I have that selected in the print dialog. In fact I made it default.
However, under Paper Handling, it says "Destination paper size: Suggested paper: US Letter" and this is greyed out. If I check "Scale to fit paper size" which I Do Not Want, then I can pick a variety of sizes. However my custom size is not in the list.
This happens on all applications, so it is definitely OS X Mountain Lion (latest patch).
Anyway, the upshot is MacOS requests US LETTER size from the printer, so the printer goes "Take this postcard stock out and gimme US LETTER". The printer can detect paper sizes. If I try to give it postcards anyway, it blows an error and won't print, which is what it should do.
How do I get OS X to tell the printer "Gimme 5.5x4.25" like I've instructed it?

Hi there Wolf!
I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
OS X Mountain Lion: Manage custom paper sizes
http://support.apple.com/kb/PH10748
Note that in that article, it states:
Custom paper sizes aren’t available for some printers.
The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
Printer and scanner software available for download
http://support.apple.com/kb/HT3669
It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
Mac OS X: How to reset the printing system
http://support.apple.com/kb/HT1341
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How do I print on a greeting card in landscape when I can't save custom paper size?

I have a J6450 running on XP SP3 with the latest drivers and patches installed. I have greeting card stock measuring 6.5 by 10.0 inches and a Microsoft Word document with a custom paper size matching the that stock prints in landscape mode. The printer error is "Paper Mistmatch. Paper size or type is incorrect." I have followed the suggestions on the HP support page, changing the Print, Properties, Features options to show "Other greeting card", but can't define a custom paper size to match the stock. The Save option is not available. What do I need to do to make this work?

Here is a link to a HP document for adjusting several settings that may help with your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01824353&tmp_task=solveCategory&cc=us&dlc=en&la...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

How to print borderless pictures in LR5?

Yesterday I was able to do it; then something has changed and now I can not do borderless prints.
I set paper size 11x8.5in printer settings, selected "borderless US legal", checked "zoom to fill" where possible, fit but LR5 restricts paper size to 10.75x8.25. It does not allow me to reduce margins to zero.

Borderless printing is a function of the printer. In order to enable it, open the page setup dialog and enable borderless printing within your printer driver.
Once enabled in the driver setup, LR will see the change and you'll be able to adjust the margins all the way to 0.
mh++

In elements 12 how to print borderless on custom paper size

Similar Messages

Maybe you are looking for