In Example Finder, I can't open the example, error: server not running

It say's the web server is not running when I try to click into any examples. It's installed under academic license 12.0.1.f3

Hello,
Does this issue only occur when you are logged on to the Domain? In other words, if you donot log on to the network does the example finder work correctly then? If so then you probably have to ask your System Administrator to allow access for the NI System Web server in your Firewall.
A good resource for finding out what ports should be opened in the Firewaal to have NI SW work correctly is:
http://digital.ni.com/public.nsf/allkb/CEF5A3568A5DA71D8625732800520EA1?OpenDocument
Regards,
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Similar Messages

Illustrator cs6 Can't open the illustration. Could not complete the requested operation.

Hi guys
I'm struggling with my Illustrator CS6. I hope you will help me.
When I try to open my project it says "Can't open the illustration. Could not complete the requested operation." After clicking ok my project is loaded WITHOUT one layer. I sacrificed a lot of time doing it and i don't want to start it over again. None of the ways to open it as older version of program work. I know that it can be recovered, because when I open the same project in After Effects all layers are loaded properly. If somebody know how to solve this problem please let me know asap.

Thanks, Monica, Ryan, and Mike. It helps to know that this is the best I'm likely to get, so I don't waste more time looking for a better solution.
I was able to place the file, then simply redraw or retype the broken parts on top of the placed art. Often, I could click into the placed art and copy contents from it. For type, though, I had to retype whatever got broken.
Since I posted my 1st comment here on Dec. 5, it happened to me again. Again, I had to reconstruct parts of it, the same way.
Sometimes, I save a file without PDF compatibility enabled, just to make it save more quickly. I'm glad I didn't do that with this file.

I keep getting the following error "server not found.....firefox can't find the server at http." when I try to log on to one certain website.

I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Cody

go through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]]

How can I recover Ai File. Which Ai file said "Can't open the illustration. Could not complete the requested operation."

Can some one help me find solution to get my art work back?
The file is open and only see a blank paper.
But the size of the file is 120000 KB.
Could some one tell me. Thank you.

I've been badly stung by this error message in the past using Illustrator CC on a capable iMac with 16GB of RAM. Even when there is clearly enough memory, it presents this specific message, but I don't think that's the problem.
I was unable to recover the file (which had embedded bitmaps), multiple artboards and was about 120MB. I lost the work so had to return to an earlier version that I had incrementally saved manually. I had also turned off PDF compatibility in the saving options so it ended up being a useless string of XML that I couldn't reimport anywhere.
All I can advise is to be cautious when working with larger Illustrator files in the future. I have yet to find a solution to this problem (and I looked hard for a long time).

Where can I get the example application FuzzyEx Car Backward Parking.vi from LabView?

Where can I get the example application FuzzyEx Car Backward Parking.vi from LabView? I've got the LabView 2009 and I don't find it.

First verify if you have the PID and Fuzzy Logic Toolkit installed. To do that, you can just look at the "Control Design and Simulation" palette and you should see PID Palette and Fuzzy Logic Palette available. If you do not see, you need to install this toolkit.
Second, in 2009 you have two options to access the example: you can directly open the example by using this address:
C:\Program Files\National Instruments\LabVIEW 2009\examples\control\fuzzy\Car Parking\FuzzyEx Car Backward Parking.vi
Or you can use the example finder and browse examples by going to: "Menu Help>>Find Examples" and "Toolkits and Modules>>PID and Fuzzy Logic Control>>Fuzzy Logic". yoiu should see "FuzzyEx Car Backward Parking".
Hope this helps.
Message Edited by Barp on 05-29-2010 12:59 PM
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

You can't open the application "AcroExt.app" because it is not responding.

I'm getting this error message every time I try to open a PDF from Finder:
You can’t open the application “AcroExt.app” because it is not responding.
I'm running Yosemite 10.10.2 and Acrobat Pro 11.0.10. In fact, it seems like it started right after I installed the 10.10.2 update.
If I open Acrobat and then open the PDF file from the File > Open menu within Acrobat the PDF will open, but if I try opening it from Finder I get the above error.
Any ideas how I can fix this?
Thanks for whatever tips you can provide.

Hi,
I have been experiencing the same issur.
This is not a fix, but rather a workaround. Keep the Adobe Acrobat application open all the time. You should be able to double-click the pdf document from the finder and open it.

Can't open the illustration. What is this?

I was working along, minding my own business...I went to save my file (my very simple file) and it gave me the "not enough memory to preview..." error message. So, I shut the system down, brought it back up and now it says "Can't open the Illustration. Could not complete the requested operation." and my page is blank! Can anyone explain this and is my file truly gone? (CS2, 10.something)

If you did a clean save without the computer crashing, and the file size looks normal, then the information is then and we should be abel to fix this.
In the finder do a CMD I on the file (On windows right click and do properties). What is the file size?
When you save, do you save with pdf compatible turned on, the default(I honestly despise this being on default for reasons I will not discuss now, but in this case it can be a very good thing for you).
If yes you can open this in Acrobat, and do a save as to a new filename. Then open this in illustrator.

Why am I getting the error message "Can't open the illustration. The illustration contains and incomplete or garbled object description."

I work in a graphic design firm and 4 separate people have received these messages on separate days using separate files on separate MAC computers. We are all using CS6.
"Can't open the illustration. Could not complete the requested operation."
"Can't open the illustration. The illustration contains an illegal operand. 1206.3.6006 % 1205.9736 1178.52 m % 1206.2236 1178.8374 I % 1206.3232 1178.% 1206.3.6006"
"Can't open the illustration. The illustration contains an illegal or misplaced operator. ∘ê 3 0 R 508054 0 R 508055 0 R]/Order 508056 0 R/RBGroups[]>>/OCGs[5 0 R 6 0 R 7 0 R 8 0 R 9 0 R 46702 0 R 46703 0 R 46704 0 R 467"
"Can't open the illustration. The illustration contains and incomplete or garbled object description."
After clicking ok the file will open; however, most of the illustration is missing. We are interested in repairing our files, but we are more interesting in figuring out why this is happening and fixing it. We are nervous to even open anything for fear this will happen again.
Please help!

brittanyesparks,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

"Can't open the illustration." problem

Hi,
I have a file that I cannot open anymore. I get a "Can't open the illustration. Could not complete the requested operation." message.
The peculiar thing is that I backed up this file to disk back when Illustrator would open it and I get the same error message when I try to open that one. I've gotten this error before on different files, but usualy due to overtaxing my machine and after a reboot the file opens right up. I have rebooted several times now and that just isn't working this time. I'm convinced the file is fine though.
CS4 with Windows Vista
Any feedback would be appreciated.

I thnk it is still the same problem but in this case it is with the scratch disk. I have a feeling that there is not enough continuous room on the scratch to handle this file even though it might appear that the fie is small compared to the size of the available space on the scratch.
Or what's behind door number two
Perhas it uses a font that is corrupt in that it is swelling the font data base which has become bloated.
Of course I could be wrong in both cases which means it is behind the mysterious door nuber three.
BTW did you try moving the Adobe Illustrator CS (#) Settings Folder?

"Safari can't open the page because it can't find the server"

I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

Since i install the OS X v10.7 Lion on my IMac, i can´t open the finder option or any of my folders. plis help

Hi,
I just finish installing the OS X v10.7 Lion on my IMac, but i can´t open the finder option or any folder (documents, download, movies, etc). I´m going crazy because i need to open my files, plis some help here.

go to disk utility and verify and repair your disks then run software update to get up to date with 10.7.2 then see if your issue is fixed.

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan

The whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

the whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

The app is not gone, it is impossible to remove it from the device.
Check all home screens and folders.
If you are unable to find it, Settings > General > Reset > Reset Home Screen Layout.
As a last resort, restore from backup.

Why do I keep getting the message, "Safari can't open the page because Safari can't find the server"?

Why do I keep getting the message, "Safari can't open the page "www.blahblah.com" because Safari can't find the server" and you can replace the website with almost any I try to open. Any ideas or solutions?

Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

My Finder is not opening, it keep given the message "Finder app can't open anymore.

My Finder is not opening, it keep given the message "Finder app can't open anymore. This was after an upgrade from Yosemite 10.10.1 to 10.10.2. Below are reports from my console
2/7/15 13:11:13.337 Finder[206]: plugin com.getdropbox.dropbox.garcon interrupted
2/10/15 15:10:20.697 Finder[3559]: assertion failed: 14C109: libxpc.dylib + 97940 [876216DC-D5D3-381E-8AF9-49AE464E5107]: 0x87
2/10/15 15:10:22.657 Finder[3559]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
Process:               Finder [205]
Path:                  /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:            com.apple.finder
Build Info:            Finder_FE-932001003000000~1
Responsible:           Finder [205]
7   com.apple.finder               0x000000010389276e 0x1036ba000 + 1935214
8   com.apple.finder               0x0000000103963171 0x1036ba000 + 2789745
12 com.apple.finder               0x0000000103962664 0x1036ba000 + 2786916
14 com.apple.finder               0x000000010388f7b4 0x1036ba000 + 1922996
18 com.apple.finder               0x0000000103889168 0x1036ba000 + 1896808
32 com.apple.finder               0x00000001036bf960 0x1036ba000 + 22880
       0x1036ba000 -        0x103ba8ffb com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

First, quit "Dropbox" and see whether there's an improvement.
Finder crashes are often caused by "Google Drive." If it's installed, I suggest you first check for an update. If that doesn't solve the problem, remove it according to the developer's instructions. You may need to start the computer in safe mode to do so. Back up all data before making any changes.
If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to "show status icons." According to reports, that may be enough to stop the crashing.
Similar cloud-data clients such as "Dolly Drive," "iDrive," "Open Drive," "Transporter Desktop," and others can cause the same problem.

In Example Finder, I can't open the example, error: server not running

Similar Messages

Maybe you are looking for