IN F-03 DATA NOT GETING PROFT CENTERWISE

I HAVE QUERY ABOUT GL TAG BY PROFIT CENTER WISE  WHEN I CHECK IN FAGLL03 THE
ENTRY GET SEPARATED WITH  PARTICULAR PROFIT CENTER BUT WHEN I USE F-03 FOR G/L
TAGGING  PROFIT CENTER FELID GET BLANK .
I WANT TAG DATA PROFIT CENTER WISE HOW CAN GET THE DATA IN F-03 BY PROFIT CENTER WISE.

Hi,
When u clear the documents using F-03 it will select the items from BSIS(open items),but when u see the same in General Ledger view u can view the line item profit center wise,but actually that will be saved in FAGLFLEXT table. There fore u cant clear the line items profit center wise.
Hope u understood.
regards
srikanth.

Similar Messages

  • Pricing data not geting picked in business orders

    Hi All,
    I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc.
    Yet when i try to create an order and enter the product, the pricing does not get picked?
    I tried alot but dono what is going wrong.
    If anyone can help, that would be great....
    Nicol

    Nicol,
    Going by your words that you have maintained all the settings, I wont challenge that.
    However I would like you to check one specific setting in item categories.
    In item category customization, check settings for pricing relevance. Make the relevant setting.
    Just a thought though. Hope this helps.
    Julius

  • Free goods sub item not geting generated in credit memo.

    Dear All,
    Example;
    Sales order for free goods    10+1
    Delivery                                   10+1
    Invoice                                     10+1
    Customer has not accepted the goods by some reason.
    We have ceated credit memo request  10+1
    Return Delivery                                     10+1
    Credit memo with reference to return delivery   ;Only 10 qunatity are copying in the billing document.Free goods quantity is not getting copied.Please guide what could be the reason.
    Sap std says credit memo should be reference to credit memo request bu out client requrement is ,it should be on return delivery based.we have done all settings but free goods qty is not geting copied.
    Regards,
    deepti

    Hi
    KIndly check the copy control configuration in the VTFL
                                                                                    Target Bill. Type  RE                    From Delivery Type LR                    
                        Credit for Returns                       Returns Delivery                                                                               
    Copying requirements   003  Header/dlv.-related                                   
    Determ.export data                                                                
    Allocation number                                                                 
    Reference number                                                                  
    Copy item number                                                                               
    Copying requirements   004  Deliv-related item          Billing quantity     B
    Data VBRK/VBRP         000                              Pos./neg. quantity   +
                                                             Pricing type         G
                                                             PricingExchRate type  
                                                             Cumulate cost         
                                                             Price source                                                                               
    REgards
    Damu

  • Data not loading /updating into cube 0lc_c03

    Dear Friends,
    I extracted data for three data sources i.e. 2lis_03_bx,
    2lis_03_bf,2lis_03_um i got data in BW PSA with out any
    error but that data is not updating in cube 0lc_c03
    i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
    at SBIW I have done like this settings: Inventory controlling
    1,Determine Industry sector I have selected Standard (core).
    2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
    3,Then stock initialization.
    and deleted setup table data for inventory controlling
    and after assigning keys I again loaded setuptable.
    I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
    but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
    any update rule level routines please guide me.
    please guide me how to get data into cube.
    Thanks in Advances
    rafeeq ahmed
    <b></b>

    Hi rafeeq,
    Are you using business content update rules or custom.
    check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
    Check if your validity table is maintained.
    hope it helps.
    kris

  • GENPC in ESTOH table not geting updated while creating report.

    Hi Guys,
    I am trying to create a report but once the report is created it is going to generation running status.
    I checked table ESTOH where all the item comes once areport is created. There is a field called GENPC in ESTOH table which logically should get filled with the Generation server automaticallly.
    The issue is that field is not geting updated with server value.
    But if i edit the table and fill the field GENPC with server name , it is then getting prcessed correctly and report is getiing generated.
    My question is why GENPC in table ESTOH  is not getting updated automatically when a report is created.
    Regards,
    Anoop

    Hello Anoop,
    could you please indicate which release you are using (ECC 6.0 with or without activated Enh.PAck 3).
    Are the WWI Work Processes running as scheduled (work processes ?); is the dispatcher running normally ?
    Have you checked transaction CG5Z ? Here you should see immediately which generation server should generate the WWI document.
    Normally it is like you have explained. You generate a report (from g02) and in the background the dispatcher dispatches this to a WWI work process which takes over the further activities. Then the data is collected and passed on to the WWI server. THen the report is build and the WWI document is passed back to SAP R/3. Im an not sure at which point of time the WWI document get the  "unique id" in DMS (what means is the number generated before the WWI is asked to generate something or is it generated if the document has been passed bacK.
    Do you have the problem always with the same generation server? Is this always the same specification and generation variant language combination?
    During the process the normal status net is used. If you check Cg50 you should be able to control the progress of generation.
    The normal status net is like this:
    SW => RR => GP => GS => CO => RE => HI (refer to http://help.sap.com/erp2005_ehp_04/helpdata/en/a7/288aa30a6c11d28a220000e829fbbd/frameset.htm
    Example of a Status Network for Reports )
    If you have the status "generation possible" and nothing is happening any more in most case there is some trouble with SAP => RFC => WWI destination.
    Therefore check in additiion WWI version, RFC connections etc.
    With best regards
    C.B.
    Edited by: Christoph Bergemann on Jul 22, 2010 8:30 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:39 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:45 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:45 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:46 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:46 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:47 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:48 PM

  • In my work  flow Invoice Details not geting  when Dispute case created?

    Hai Experts,
                          Im Working on Dispute case Workflow in FSCM module , I Created custom workflow for that ,
    when ever Disputecase created notification send to Processor and Coordinator for that i created one Zclass
    write the one of the that Zclass method for sending  the mail to processor and coordinator for those mail Id's,
    Its working fine but the problem is on that mail i have to send the Invoice details also ,
    for that im using the fm  'UDM_GET_BOR_OBJECT_KEY_INVOICE ' this FM not geting the data when dispute case is created,
    its working in foreground and background, but the problem is in workflow it  is not geting the invoice details.
    please help me on this,,,
    thanks in adv..

    Hello,
    "I Debug the FM, its throughs the Error
    'No Configuration for the wrokflow Wfno version 0000'."
    I doubt very much that the FM is showing that error. I assume you mean the workflow log.
    The step that calls the task that calls the method that calls that FM, is that the one with that error message?
    First check that the FM works in SE37 with the same inputs as when called from the workflow, and if it gives the expected output.
    Try replacing that step with a different one to make sure there's no problem with the workflow itself. Make sure the workflow is activated without errors and do SWU_OBUF.
    regards
    Rick Bakker
    hanabi technology

  • Report designer issue:data not coming

    Hi Folks,
    I have an issue with bex report designer.
    The thing is i have created a query in query designer and that is my data provider for report designer.
    I am applying some formatting rules and executing it.
    The problem is i am not geting any records except the fields.
    Could anyone help in this regard.
    Regards

    HI,
    There are different sections in a Report Designer. G0Header, G1 Header, Det, G1Footer, G0Footer
    G0 Header: Contains only the labels of the feilds that is displayed on the top of every page.
    G1 Header: is a level 1 header which is displayed Beneth the Group0 Header
    Detail: will display the values of Query Elements(Key/Text) placed in this section.
    G1 Footer: Will be displayed once for each G1 Header that is displayed. This Can have the totals.
    G0 Header: Will be displayed at the end of the page. The footer can have page nuber or totals.
    For Example:
    To design a simple report having Distribution Channel and Sales Amount. The report can be designed as
    G0 Header: [Distribution Channel].Key [Distribution Channel].Text [Sales Amount]
    Detail: [Distribution Channel].Key [Distribution Channel].Text [Sales Amount].Val
    G0 Header: [Result]                                                                [Sales Amount].Sum
    Thanks,
    Saranya

  • I am not geting all the records in TCRT for a perticular sequnce number ?

    Hi All,
    I  not geting all the recotrds in TCRT table  what ever the records i can see in transaction : PC_PARESULT for a perticular employee of perticular sequence neumber.
    My code is like this : for the cumyr = '2008' i am geting values but cumyr = '2007' i am not geting values . But actually records exist for that condition as i see through PA_PCRESULT.
    cd-key-pernr = pernr-pernr.
      rp-imp-c2-cu.
      SORT rgdir BY paydt DESCENDING.
      LOOP AT rgdir.
    CHECK: rgdir-paydt BETWEEN p_detryr_low AND
                                   p_detryr_high,
        rx-key-pernr = cd-key-pernr.
        UNPACK rgdir-seqnr TO rx-key-seqno.
        rp-imp-c2-ru.
        EXIT.
      ENDLOOP.
    IF sy-subrc = 0.
      LOOP AT tcrt WHERE lgart = '/303' AND
                             ctype = 'Y' AND
                             taxau = 'FED' AND
                             cumyr = '2008'.
        v_betrg 1= v_betrg + tcrt-betrg.
      ENDLOOP.
    LOOP AT tcrt WHERE lgart = '/303' AND
                             ctype = 'Y' AND
                             taxau = 'FED' AND
                             cumyr = '2007'.
        v_betrg 2 = v_betrg + tcrt-betrg.
      ENDLOOP.
         Thanks ,
    Suresh.

    You may not expressly be using all the RAM in your machine but OS X will, whether you know it or not.
    Each time you read a file from disk, whatever was read is cached by the system; when the file or program is no longer in use, the memory is marked free for the system to recover for other purposes but as long as it remains in memory the next time you need to access that disk information it's simply read from memory.
    The more RAM, the more disk data is kept around and the faster your machine will operate until that memory needs to be recovered or you reboot (or otherwise flush the disk cache.)

  • While erasing contact and setting my phone stop working showing round waiting circle and its not geting switched off also

    while erasing contact and setting my phone stop working showing round waiting circle and its not geting switched off also

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Data not received in PSA Table

    hi guyz,
    im facing the below issue while loading master data attr from source system to bi system.
    im loading data from 0vendor_attr to ovendor object.
    only half of the records are processed and gets hanged.
    in monitor- administrator workbench its showing (60434 from 157912 records)
    below are the details of the issue:
    Data not received in PSA Table
    Diagnosis
    Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump.
    please guide with your expertise.
    cheerz,
    raps.

    Hi Rajeev,
    Check the job in Background (SM37), you can analyze from here.
    Check the short dump in ST22.and check system performance once.
    If you are facing this problem first time, cancel the background job and make the request red.
    Then repeat the IP again, it will get successful.
    This should be due to performance issue or RFC problem of your system.
    If the job is active in SM37, cancel the job and make the status IP red.
    Re run the IP, it  will get successful.
    Regards,
    Venkatesh
    Edited by: Venky1903 on Aug 15, 2011 2:09 AM

  • Data not received in Data target

    Hi,
    I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
    "Data not received in InfoCube / PSA object / InfoObject
    Diagnosis
    Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump."
    The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
    This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

    Hi,
    I have created new infopackage and ran. Now the following message I have got on the monitor.
    "Data not received in PSA Table
    Diagnosis
    Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump."
    Any more thoughts?
    Thanks,
    Rao.

  • Data not received in InfoCube / PSA object / InfoObject

    Hi Experts,
    i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
    Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
    i hope you all understand my problem. if so please advise.
    Thanks,
    RK
    Edited by: RK on May 21, 2009 6:48 PM

    Did you try looking into short dump about the problem ?
    try these links :
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"
    Short Dump "Data not received in InfoCube / PSA object / InfoObject"

  • Data not received in PSA Table(urgent)

    hello,
    While loading Master data full load
    which is a load of 457070 on 2days back
    where only 4lac records r received to PSA but remaining 57070 was missing
    with error<b> Data not received in PSA Table
    </b>
    when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
    where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
    I required ur help to solve this
    i will thank by giving points
    Regards
    PSC

    Hi,
    check if there is a TRFC haging in SM58.
    can that be that your DB cannot extend its space for this amount of data.
    How do you perform the load?
    package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
    Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
    As already mentionned it could also be that an IDOC is haging...
    please let us know
    Olivier.

  • Data not received in PSA Table  0ORGUNIT

    Hi,
    We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
    Thanks in advance
    K

    You can change the size of the Data Packet.
    Open InfoPackge.
    From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
    Default setting of the Source System will be shown.
    Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
    Regards
    Anujit Ghosh

  • Data not received in PSA Table - Data of request already deleted

    Hi
    I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
    And when I click on the PSA table it telling me that  Data of request XXXXXX already deleted.
    I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
    And the short dump analysis just say: 
    A RAISE statement in the program "SAPLRSSM" raised the exception
    condition "NOT_EXIST".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    I've also tried to repeat the load but with no luck.
    Anyone know how to fix this?
    Thank you in advance

    Hi,
    Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
    Also delete the green request in the Source DSO and repeat it.
    Once it loads successfully then load the data to other 3 targets.
    Rgds,
    Ram

Maybe you are looking for