In f-58 comapny code field is display mode

when iam open f-58 tcode, in that screen company code field is in disply mode . how to change that field as required field

If you enter the T code F-58, If you see the details of Posting date, Document date, Period like this.....
Just click on Back arrow button or Press F3.
Then you will be able to see the Company code with Check payment details in Edot mode
F-58 - Click on Back arrow button or F3
Thanks

Similar Messages

Need to show some fields in display mode

Hi, i need to show some fields in display mode for VA02 transaction code( is to change the values) for some particular users. so do we have any user exits for this requirement?
Please answer me. its very urgent.. thanks in advance.
ex: payment terms and freight terms.

you can try this for header level data
MV45AFZZ exit ""USEREXIT_FIELD_MODIFICATION"
code would be like below
   CASE screen-name.
To suppress Pricing total and Cuurency field at header
      WHEN 'VBAK-NETWR'.
*YOU CAN ADD YOUR CONDITION HERE WHICH IF SATISFY THEN *EXECUTE NEXT LINE OR SKIP IT
      screen-INPUT = 0.
      WHEN 'VBAK-WAERK'.
          screen-INPUT = 0
    ENDCASE.
but it depend upon what data AND in which tab you want to hide, like is it at header level or at item level or pricing (HEADER OR ITEM) data each of them have different exit to restrict data modification.
ENJOY SAP.

Making short text field in Display mode for one particular Purchasing

Hi All,
This is regarding Making the Short text field in Display mode of PR for one Particular Purchasing.. i am giving you a bit elaborate...We are into E-Catalog Procurement.I will do the shopping from the Vendors external catalog and i will return back to SAP.
While doing so, i dont want the user to change the Short Text field. I want that field shud display the Description. When i tried with the Screen Layout settings, it is fully grayed out and i am not able to see the Description of the Material. Is there any other options to get this enabled?. Please advice me on this settings to be done. Thanks in Advance.
With Regards,
Saakithyan

Hi
Define a Field selection key (new not the one which is assigned to document type) which makes short text editable in screen layout config. and assign it to functional authorization value in t.code OMET. (it should be numeric). Then assign that functional authorization value in user master SU01 for users with parameter id EFB.
Then it will work
Regards
Antony

Infotype 0041 - Date type field in display mode always

Hi All,
Please help in find out solution for the below enhancement
In infotype 0041 we have date type and date field. We need to make the date type field to be display mode always.
Thanks for your help in advance.
Thanks,
Karthikeyan

Hi Karthikeyan ,
Please find the resolution as below :
Userexit - EXIT_SAPFP50M_001 . In Include ZXPADU01. Write the below code .
DATA: w_P0041 TYPE P0041.
IF ipsyst-massn <> space AND
( ipsyst-ioper = 'INS' OR
    ipsyst-ioper = 'INSS' OR
    ipsyst-ioper = 'COP' OR
    ipsyst-ioper = 'MOD').
CASE innnn-infty.
WHEN '0041'.
*convert prelp to pnnnn structure
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING
PRELP = INNNN
IMPORTING
PNNNN = w_P0041 .
*Here you can have more conditions like for which Action Types you want the
IT0041 to default .
w_P0041-dar01 = 'Z1'.
w_P0041-dar02 = 'Z2'.
w_P0041-dar03 = 'Z3'.
*convert pnnnn to prelp structure
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>pnnnn_to_prelp
EXPORTING
PNNNN = w_P0041
IMPORTING
PRELP = INNNN.
*Display mode
LOOP AT SCREEN.
          IF screen-name = 'P0041-DAR01' OR
             screen-name = 'P0041-DAR02' OR
             screen-name = 'P0041-DAR03' .
            CLEAR screen-group2.
            screen-input = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
WHEN OTHERS.
ENDCASE.
ENDIF.
Thanks ,
Sucharita Das

How to keep wbs element field in display mode in me22n?

Hi all,
Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?

Hi Dhruv,
You can implement BADI ME_PROCESS_PO_CUST and implement the method FIELDSELECTION_ITEM.
I have pasted the SAP documentation available below. Please try this.
Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
At header level FIELDSELECTION_HEADER_REFKEYS
Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
At item level FIELDSELECTION_ITEM_REFKEYS
Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
Documentation for BAdI method FIELDSELECTION_HEADER
Documentation for BAdI method FIELDSELECTION_ITEM
Special Field Selection Item
Functionality
The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
Parameters
The following parameters are available:
IM_HEADER - Document header
The interface reference is of the type IF_PURCHASE_ORDER_MM.
IM_ITEM - Document item
The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
CH_FIELDSELECTION - Fiele selection table
By making changes to this table, you can influence the display properties of a field.
This table consists of value pairs <METAFIELD|FIELDSTATUS>.
The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
Through this abstraction, reference can be made to business contents on a uniform basis.
Standard metafields are defined in the type group MMMFD.
The field selection status has four possible instances:
'-' Field is suppressed
'*' Field is purely a display field
'.' Input field
'+' Mandatory field
Notes
Under no circumstances make any changes to the database within this method. On no account use Commits.
For WBS element the meta filed no is 512.
mmmfd_wbs_element TYPE mmpur_metafield VALUE 512.
In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
DATA: l_persistent TYPE mmpur_bool.
l_persistent = im_ITEM->is_persistent( ).
READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
IF sy-subrc IS INITIAL.
<FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
ENDIF.
Try this, it should work.
Regards,
Savitha
Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM

Ship-to-party field in display mode in TC va02 for some users.

Hi Sap Gurus,
My client requirement is this ,he wants the ship-to-party field in TC Va02 to be in display mode for some lower level user and at the same time she wants the ship-to-party field for higher level users to be editable.
Can anybody tell me how to do this .Va02 TC will be given to lower level users where they will be able to edit other fields except ship-to-party.
Thanks N Regards,
Siddhartha

Hello Siddhartha ji,
I think you can proceed in this way:-
Create TCode zva02 by copying from VA02 .
Then Create Screen Variant and assign that screen variant to transaction variant .
Then Create Variant Group for that Tcode and then assign this variant group to those particular users.
Even you can proceed with out creating the ZVA02 Tcode.
All Will be done in SHD0 TCode.
@ others :- i am basicaly into ABAP...so I may be wrong...pls Help him out ..
Regards,
jeevan kumar Medimi.

How to make a field from display mode to change mode for a perticular tcode

hi all,
my client want to change one field which is in display mode of a material doc in mb02.
Restrictions in some fields in MIGO needs to be changed.
Uploading point in case of issue: While editing the MIGO latter, this field needs to be edited.
Goods recipient in case of receipt: While editing the MIGO latter, this field needs to be edited.

hi thanks for quick replay,
my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
any comments?
regards,
susanta
Edited by: susanta bindhani on Jun 19, 2008 2:18 PM

Input field in display mode; but F4 help has to be avail

Hi,
            i have a input field in my view and i want that one to be in display mode ( the intention is that i want to have the value to be filled from F4 help values only). I have set the read only set for the input field. I have tried all the cases of normal ddic help;OVS;Freely input help; context node info value set but no luck.
In the below forum message Re: how to provide f4 help to the read only input field i could see the input from Thomas that the Freely input help will be useful in this case;I tired this way too but no luck.
Can you please let me know do i missed any point ;your inputs are higly appreciated.
Thanks and Regards,
Satish A.

hi,Satish A.
After check your requirement, i think you can use "Freely programmed Input help".You can search them in this forum or google, i think you will get some clue.
As a reply, i summarize this topic simply. Take one example.
Scenario:
F4-help component will be used for "F4". It displays all the data in table, and you can select one record, then the F4-help will be closed and the "CARRID" will be returned to the Read-only field in your main component.
F4-help-component
(1). You should implement one WD Component which implemented the WD interface "IWD_VALUE_HelP".
(2).In this component, you can add one "Interface event", for example, named "Select". And this event has one parameter "CARRID".
(3).In the table's OnSELECT event, you can use:
method ONACTIONSELECT_ROW .
data:
    lo_Node      type ref to If_Wd_Context_Node,
    lo_Elem      type ref to If_Wd_Context_Element,
    ls_elem      type wd_this->element_table,
    lt_elem      type wd_this->elements_table.
*1. get the Solution-list context node
lo_Node = wd_context->get_child_node( Name = 'TABLE' ).
*2. set the lead selection of table
lo_node->set_lead_selection( element = NEW_LEAD_SELECTION ).
*3. get the attribute value of selected row
NEW_LEAD_SELECTION->get_Static_Attributes(
    importing
       Static_Attributes = ls_elem ).
*4. Fire interface event:
"will return the CARRID parameter
WD_COMP_CONTROLLER->Fire_select_Evt(
      CARRID = ls_elem-carrid ).
*5. close the F4 help
WD_COMP_CONTROLLER->F4_LISTENER->CLOSE_WINDOW( ).
endmethod.
In your main component:
(1). Use your F4-help component as used-component
(2). set your context attribute's input help mode as "Freely programmed". At the same time, input your component usage which is added in step 1.
(3). You should add one Event-handler for your F4-help component Interface event, for example, named "On_f4_help". you can use:
method ON_F4_HELP .
"This event handler will has one parameter named "CARRID" automatically
wd_context->set_attribute(
    EXPORTING
      name = 'IPFIELD'
      value = CARRID
endmethod.
Hope it can help you a little.
Best wishes.

How to restrict the t code BBPMAININT with DISPLAY Mode in SRM?

Hi experts,
I want to restrict the T code BBPMAININT : Maintain Business Partner with DISPLAY mode in SRM system?
Action Taken:1. I have restricted with "03 Activity" of all check and maintainauthorization objects for this tocde .
2. I have performed the authorization trace also, there also I have not found any new objects.
Here are list of auth object I have restricted:
BBP_FUNCT
BBP_PD_AUC
BBP_PD_BID
BBP_PD_CNF
BBP_PD_CTR
BBP_PD_INV
BBP_PD_PCO
BBP_PD_PO
BBP_PD_QUO
But I have not clearly understand of the object : BBP_FUNCT.
In this Object, I have maintained BE_F4_HELP value only. And rest of the auth object I have restricted to 03 activity only.
But still users are able to acess the CREATE and MANAGE buttons.
So how Can I restrict the this T code in display mode?
Please suggest me...
Thanks in advance.
Regards,
Siva

Siva,
Does your users have any other tcodes assigned to them other than the one you needed to be resticted?
As a trial, assign only your tcode to a user and run the trace.
Let us know your findings.
Regards,
Brahmeshwar

TCD field in display mode in S_TCODE

Hello,
I have a requirement to remove t-codes from TCD field under S_TCODE object in the role itself and NOT from the role menu.However when I go to PFCG>Change>Auth.Data Tab>Change auth.data>, the field TCD is DISPLAY only and hence removal of t-codes cannot be done.
Why is this and what would be the workaround.
Thanks.
Mani

Thanks Debmalya.
The issue is - why the change is possible for certain roles and only for this role, Would not a PFCG Change function allow you to 'Change' field level values.
Also as Diego has suggested , I have verified that this role is not part of a customizing project.
This requirement is from one of a remote customer my organization supports.
Mani

ORDER field in display mode - Internal Order

Dear All,
While creating the Internal order ,the 'ORDER' field (AUFNR) must be in dispaly mode,so that the user are not able to key in the order no to the order type.
In our development client,its as per our req,but in production client its in editable mode and the users key in the order no while creating the same.
Can you let me know whre i have to the setting to get my requirement.
Do revert
Appreciate your help
Regards,

Hi,
It depends on the number range u have assigned to u r order type. If you assign internal number range for your order type, then order field will be shown as display fileld in the order creation mode.
If you assign external number range for the order type, then order field becomes mandatory and input field.
If u dont want this field as input go and assign the internal number range to the order type.
Regards
Sudhakar Reddy

Commitment Item field in Display

Hello,
At the time of creation of PR for certain document type, How to make commitment item field in DISPLAY mode,which is avlialbe in Account assignment tab.
Thanks,
Vikas R

Hi,
This setting cannot be done for document type. This depends on the account assignment category only. Check t-code OME9 and click the details(Lens) for each AA category.
Regards
Aloysius

Industry sector field for display only.

Dear All,
Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
Regards
Rang

Hello Ranganath,
You can use transaction exit. for more information check this thread.
Industry sector (MBRSH) field in display mode.
Hope this helps.
Regards
Arif Mansuri

Vendor field needs to be made in display mode in MIRO

Hi,
The PO was created for Vendor 'A', whereas invoice was wrongly posted to Vendor 'B'. Before noticing it, the vendor has been paid. Now the user wants to reverse the same and redo it to correct vendor.
How we can restrict manual change of vendor during MIRO? Whether we can make the vendor field in display mode under Details tab in MIRO
Kindly provide your inputs at the earliest.
Thanks & Regards,
G.Ameet Karthikeyan

Hi
Then write a validation that Inv. Party = PO Vendor name
but if your client use Import PO then don't validate that because in Import PO CVD time we change the vendor name.
Regards
Tanmoy

MIRO - Payment Tab Payments Terms Field (Display Mode)

Hi,
My requirement is to make the MIRO - Payment Tab> Payments Terms Field into Display Mode.
How to achieve this.
Regards,
Baskar

Hi,
With the help of the Screen Variant, you can able to set it.
Thanks,
Log.

In f-58 comapny code field is display mode

Similar Messages

Maybe you are looking for