In Fact Sheet, Open Leads View is displaying all Leads

Hi Gurus,
I have configured Account Fact Sheet(BP_Account_FS).
I have added view "Open Leads", which should "display the last n leads that have status "open" or "in process".
But In my case "Open Leads" is displaying all the Leads, which have status "Converted" & "Rejected" also.
Anyone has come across with this. What are your suggestions?
Thanks & Regards
Rohan

Hi,
Raised an OSS, there was a programming error, so a new SAP Note has created SAP Note No. 1319703.
Thanks & Regards
Rohan

Similar Messages

Profile in Fact sheet under over views

Hello gurus
how to indenfy the table fromwhere the profiles are created in the fact sheet (account view)under Over views work center
Work center: Over view -> Account view>Data Environment--->profile (say:Internal Profile for Budget Billing Amount Adjust,Internal Profile for bill correction,Std cic Data Environment for 4.64,waste mangement....)
the componet is IUICENV this is where we can see the profile field with Dril down.
Your inputs are highly appricated.

the details are coming from CS system
sap utilities>CS>Customer interaction center->Define data environment for navigation area-

ITunes Tv shows view not displaying all Artwork

I recently purchased 2 seasons of a show, each sold separately, each with it's own Artwork. When viewed in iTunes Tv Shows list it is only showing 1 Artwork for both seasons. I can go into the Get Info section and see the correct Artwork for each Seasons but it isn't displayed in the listing.
Is there someway to get this to show up?
Thx

I am having the same problem. It seems itunes has not programmed it to show different artwork for the same show, even if there are different seasons. I am hoping a new update soon will take care of this. The only way I know to get around it is to go into the get info for each episode for one season and add a space after the show title. Each episode then will show their own artwork, because the titles will be a little different, however, when syncing to my ipod, it shows up as the tv show listed twice, which *****.

PDF Fact Sheet Display

Hi All
I would like to know how SAP CRM 2007 WebClient handles the PDF Fact Sheet display.
Can the template format be defined? ie. can I customize the format of the PDF display? If so, how can it be done?
Thanks for any advice!

Arno,
Does the print fact sheet have the capability to print all these information.
·          Classification
·          Key Figures
·          Contact Person (list)
·          Order - Sales Area
·          Billing u2013 Sales Area
·          Shipping
·          Partial Deliveries
·          General Transportation Information
·          Payment and Delivery Terms
·          Partners u2013 by Partner Function
·          Sales Orders u2013 open and closed
·           Deliveries
·          Billing Documents (Invoices - open and closed)
·          Invoice Cancellations
·          Credit Memos
·          Debit Memos
·          Returns delivery
·          Quality Notifications
·          Credit Relevant Information
·          Credit Limit
·          Payment History
·          Quick Info
·          Backorders
I see a little when we printed our print fact sheet. Do I need to configure anything more to print all the above sections.
Thanks!
Surya.

Credit information in fact sheet

Hi All,
We are unable to view ECC fields in the account fact sheet. Credit Information and Back orders view is added in the fact sheet. however no information is displayed.
We have maintained the standard configuration as suggested in the SMOFPARSFA table CRMCFSOLTP field to map the RFC connection to the ECC system.
Still we see "No result found" in the Credit information and back orders assignment block.
Please suggest if any additional configurations have to be made.

Hi,
Are you sure the BP hast credit informations?
Else check the function modul CRMT_ERP_FACT_SHEET_RETRIEVE. It is the coding that actually calls the rfc fuba in the ECC (-> CRM_CCKPT_EXPORTSUMMARY). Check it the table ET_ERP_CREDITINFO is filled while debugging.
Line 302:
GT_ERP_CREDITINFO = ET_ERP_CREDITINFO.
GT_ERP_LASTSALES = ET_ERP_LASTSALES.
GT_ERP_BACKORDERS = ET_ERP_BACKORDERS.
Regards,
Thea

New Info Block in BP Fact Sheet

Hi Experts,
How i can add new Info Block to Business Partner Fact Sheet (BP_FACTSHEET) with other class and all data.
I will write some ABAP program with data but how i can assing it to new info block?
Any ideas?
Thanks to all

Hi,
Create the fact sheet views that you want to include in the component workbench.
Under UI framework def>factsheet> assign these views to a fact sheet.
Then these views are then displayed in Available Fact Sheet Views in the fact sheet configuration using bsp_dlc_fs component within the component workbench.
Select the created view as one of the tile in factsheet.
Hope this helps
Srinivas

CRM2007, Fact Sheet, Long Texts (STXH/STXL)

Hi Folks
We are in the middle of an upgrade from CRM 3.1 to CRM2007. And then I am looking at the new Fact Sheets. In our old CRM 3.1 system we have a lot of self developped Info Blocks (Assignment Blocks in CRM2007). And in the new CRM2007 the users want the same data displayed in the Fact Sheet.
When i'm looking at the existing Assignment blocks in the new Fact Sheet it seems to me that all the views are of type Table. What if I want to make some different views, each containing one Note (Long Text) entry? Is it possible?
What is the best to do? In the old CRM 3.1 system I copied the Class CL_CRM_CCKPT_IO_OPENLEADS to a Z-class. And then this class was my skeleton for the rest of the Info Blocks we have developped.
One of our needs is that we have to make a Viewset with example 4 viewareas, 2 rows and 2 columns.
Each viewarea should then containe one view. And in each of these views we want to display one longtext (Note)
In our old CRm 3.1 world we read the specific Longtext (from STXH/STXL) with the functionmodule READ_TEXT. The ID could be Z23A, Z23B....Z23H and the Name = Customer Number.
call function 'READ_TEXT'
    exporting
*   CLIENT                        = SY-MANDT
      id                            = zzid
      language                      = sy-langu
      name                          = w_name
      object                        = 'BUT000'
Is it possible to have one view displayed in the four viewareas, and then in a kind of way just change the ID to display four different texts??
Best regards
An Mery Xmas
Carsten

Hi Folks
I have now been able to display Notes in the Fact Sheet
Best regards
Carsten

CRM2007 and Fact Sheet

Hi Folks
We are in the middle of an upgrade from CRM 3.1 to CRM2007. And then I am looking at the new Fact Sheets. In our old CRM 3.1 system we have a lot of self developped Info Blocks (Assignment Blocks in CRM2007). And in the new CRM2007 the users want the same data displayed in the Fact Sheet.
When i'm looking at the existing Assignment blocks in the new Fact Sheet it seems to me that all the views are of type Table. What if I want to make some different views, each containing one Note (Long Text) entry? Is it possible?
What is the best to do? In the old CRM 3.1 system I copied the Class CL_CRM_CCKPT_IO_OPENLEADS to a Z-class. And then this class was my skeleton for the rest of the Info Blocks we have developped.
What to do in CRM2007?
- Enhance the component BP_FACTSHEET?
- Copy views from BP_FACTSHEET to Z-component, and then make some changes?
- Create own component and own views from the bottom?
Hints needed!
Have a nice day.
Carsten

Hi Carsten,
Would you mind sharing how you did this. I need to create some custom views and populate these with data from ECC6. I am struggling with finding out where in the view it should be populated with data.
Your help would be much appreciated.
Regards,
John

SharePoint 2010 : How to display ALL Version History of a list item's multiline text box in a same list as a list view column?

In SharePoint 2010 , I have version history enabled multiple text box 'issue details'. Users mainly uses Data Sheet view and it does not show all version history of that multiple line text box, is there anyway we can display list view column in
data sheet view to display all version history?
2) If we can not display in datasheet view, in standard view, it should display all version history instead of just a link to -view all entries'
I have found one article here and it posts to use below line of code in sharepoint desinger
<SharePoint:AppendOnlyHistory runat="server" ItemId="{$thisNode/@ID}" FieldName="Issue_x0020_Details" ControlMode="Display"></SharePoint:AppendOnlyHistory>
WHen I use this line of code , it displays multiple line of same version history instead of each, please help.

Hi
Greetings. Hope it helps
https://social.technet.microsoft.com/Forums/sharepoint/en-US/d1be5434-7dc9-4941-bf1d-8c12d7e6a155/display-version-history-in-list-view-column?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

How do I get the reminders, in list view, to display in date order?

How do I get the reminders, in list view, to display in date order? I can't seem to get them to display in date order on either my ipad or iphone.
Yes i know I can look at date view, but i don't like that view. I excepted the list view to display all reminders in date order.
Thanks!

You need to create a stringwriter, wrap it in a printwriter, then print to the printwriter, then convert the stringwriter to a string.
Here's an example:
StringWriter sw = new java.io.StringWriter();
PrintWriter pw = new java.io.PrintWriter(sw);
e.printStackTrace(pw);
String strError = sw.toString();
I hope this works. I didn't test the above code. I don't think I'm leaving anything out, but it's been a while since I've done it. Either way, it should get you on the right track to get what you need.
Hope that helps.
Michael

LMS 3.2 functional view no display

Hi,
I have a LMS 3.2 installation where the functional view was displaying all the menus correctly. after a system restart, the functional view is empty with no menus
but all other menus are functioning well.
please let me know how to solve this issue
with thanks
sathappan

There is a cli option to restore the portal views. CSCOpx/bin/RestorePortal.pl
If you have not made to many changes this is the best option.
I don't think the portal.db is part of the backup. Maybe it is if you have made changes. Check your backups.
Cheers,
Michel

Open_Leads fact sheet displays the "key" for Qualification Level

Hi all,
Adding the Open Leads fact sheet to my config...
It actually displays the Qualification Level, but showing the KEY and not the description...
Is there a note I need to implement to correct this?
BP_FACTSHEET --> OPENLEADS
Went to the context node and apparently the Lead's Qualification description is not returned.
Anyone has noticed the same?

>>Hi Shridar,
>>You can define your own views under spro>CRM>Master Data>business >>Partner>buisness Partner Cockpit and Fact sheet-->Define Info blocks.
>>Hope it helps.
I am using CRM 5.2 and I can no longer find such menu items in SPRO: buisness Partner Cockpit and Fact sheet-->Define Info blocks. Do you have a t-code for it or another way of getting to it? At some point I was actually able to get to Business partner cockpit and fact sheet. But I am having trouble getting there. Please advise, thanks!

Create own views in the Fact Sheet

Hi Forum,
I am trying to create my own views in the fact sheet.
for instance open opportunities,closed oppportunities,open leads,closed leads... w.r.t a particular BP.
plz guide how this can be achieved.
Kind Regards!
Lucas

Hi Lucas,
In order to create your own views in the fact sheet follow the above steps:
spro  CRM  Master Data  Business Partner  Business Partner Cockpit and fact Sheet.
Make the settings in Define Info blocks and views by first maintaining the info blocks. Then go to View definitions and assign info blocks.
Before creating you Info block you have to create your own class and then register this class in CRMC_CCKPT_IOREG table in order to see it in the fact sheet list.
Hope it helps!
Best regards,
Roula Lazaridou

Open/Close chart button not working in Account Fact Sheet

Hi,
My requirement is like this:
There are some standard assignment blocks like Contacts and custom assignment blocks like Sales order details in Account Fact Sheet(AFS). There is one Open/Close chart button present at the top of each assignment block. When it is clicked, a pictorial representation of data in AFS is displayed.
My question is where is the code written for this functionality. The tool bar based buttons defined in the implementation class of corresponding component like get_buttons, get_system_buttons etc are not at all defined Also there is no coding written in the HTML page of the view.
Please let me know if anybody worked on this.
Regards,
Narendra

Hi All.
We are working on SAP CRM 7.0 EHP2.We need to show account factsheet on Account Overview page in IC-Agent Role.
We are using account factsheet BP_ACCOUNT_FS.In this account sheet,data is not populated or not able to select the org data in view " Sales Organization Selector".same data is appearing in Account Overview page.
Same type of issue (Account Shipping data, Account Sales data, Account Billing Data etc is not coming in factsheet)was posted eariler and status of post is resolved but solution is not given.
Please help us in this issue.
Regards,
Urvashi

Status used in open and completed transactions in Fact Sheet

Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
Appreciate any help on the above.
Cheers!
SF

No response. Based on what is being debugged, all transactions are taken into account.

In Fact Sheet, Open Leads View is displaying all Leads

Similar Messages

Maybe you are looking for