In FCE HD swithing between HD camcorder and SD camcorder problem

I am just starting to go HD. I've got my new Sony HC3 HD camcorder and I've just upgraded my mac to FCE HD. I was able to connect the fireware to the HD camcorder and import the footage just fine when I changed "Easy Setup" to "HDV-Apple Intermediate Codec 1080i60". The problem is I still want to be able to connect to my Canon Optura Xi SD camcorder. When I change the "Easy Setup" to "DV-NTSC", it can not see the SD camcorder. I've tried every option in the "Easy Setup" dropdown. I think I have tried every combination of exiting FCE HD, rebooting, disconnecting the firewire, turning the camcorder on / off, etc.
When I had FCE 2.0, I never had a problem connecting to my SD camcorder. Now I do. The only other point I want to mention is that no matter what option I select in the "Easy Setup", the "External A/V" error message (the one with the continue or check again option) always says:
"Unable to locate the following external devices:
Apple FireWire NTSC (720 x 480)".
thanks in advance for any help offered

Hi(Bonjour)!
Did you quit FCE HD before unpluging your HC3?
It's always a good idea to do all conections and turn on your camcorder to VCR mode before lauching FCE.
Avoid to plug and unplug differents camcorders in one FCE session.
Try to connect your DV camcorder in a new project and select DV-NTSC or firewire basic (canon camcorder are prone to be "uncontrolable" with DV NTSC ) in easy setup BEFORE creating a new sequence. Now quit, plug your DV cam and re-lauch FCE HD.
For your "warning problem" on startup, check "do not show A/V device warning on lauch" in user preference.
At last, you can trash all 3 FCE HD preference files.
Michel Boissonneault

Similar Messages

Caught between Imovie 09 and FCE

I am caught in between these two programs.
I am a beginner and only need the basic editing tools available in Imovie, yet I have an AVHD camcorder and want to import footage at maximum resolution. I have been importing at full resolution and exporting to Quicktime. There is a significant reduction in quality in the final movie (even when played back on the computer).
Does anyone know if '09 will be updated any time soon to allow for full HD editing?
Are there are editing programs for mac that are simple to use but allow for lossless editing?
Any suggestions would be much appreciated.

So here we are, more than half way through '10 and we're still stuck not having a lossless means for editing without mortgaging the house?
I've got iMovie '06 and I've been trying to use it on Snow Leopard (10.6.4) and I'm getting crashes which detract from my happy life.
Do we have any indications that Apple might be fixing this in the near future?
I've got video of my daughter's HS graduation that is PRECIOUS and I don't want to be dropping bits left and right.
Thanks for everyone's time.

HD-camcorder and FCE-HD

Will the new Canon HV-20 work with FCE-HD ver. 3.5.1?

Thanks Tom. I guess I should have asked if I should go HD. I mainly video tape my 2 daughters soccer games and have a High School trip to England for soccer. How difficult is it to switch to HD for SD? I have read some of the previous posts and it does not seem as intuitive as I thought. I do basic action editing and do not plan on getting a HD burner until the prices drop. I need a new camcorder and just thought it was time to go HD! Thanks for any suggestions. By the way, if anyone has had a great experience with any new camcorder I would love to hear reccomendations.

Swithing between Speakers and Headset

I have a computer with a ZxR installed and have set it up to work with a Tactic3d headset. What is the quickest and easiest way to switch between the headset and a pair of external speakers? How should I attach the speakers and what Windows 8.1 driver and SoundBlaster driver settings should I use?

Plug your speakers into the soundcard as usual.
use the front mounted headphone socket on the fromt of the X-Fi I/O unit to connect your headset and set the control panel to automatically mute your speakers when the headset is connected. Your speakers will mute when the headset is plugged in and all you have to do is plug or unplug the headset at the front to switch modes!...Now please do not ask about doing the same with your mike connector!! see other thread by me!! p.s creative do ship a /4" to 3.5mmm adapter with the card.
Hope I have understood your post
AndyMessage Edited by slef2003 on 0-4-2006 03:54 AM

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

Share cinema display between Mac Mini and MacBook Pro

Hello -
I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use.
How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one input in the LED cinema display ???
Thanks in advance.
Andrew

Interesting - I have the same idea: sharing a 24" cinema display between a Macbook Pro for myself and a Mac mini for my wife.
The only problem I see is that the display doesn't have any Firewire ports. So if I want to use an external harddrive (or a mini-DV camcorder) on both computers when connected to the display, then I'd have to plug that into the computer instead of the display ...

Canon Vixia camcorder and Imovie09 anyone have any issues?

Hi I have a 2009 2.66 ghz Quad Core Mac Pro. I plan on purchasing a high definition camcorder, I was very interested in the Canon Vixia series but was concerned because I read that people had issues with their canon Vixia camcorder and Imovie. Should I be concerned? Anyone have any issues with the Canon VIXIA HFS100, HF200, or the HF20 and Imovie09 on their 2009 intel Mac Pro? I don't want to spend 750-900 dollars on a camcorder if I'm going to have issues importing the videos into my mac. Any info is greatly appreciated

Sheryl Kingstone wrote:
Other issues were around the 1080p is not really 1080p. meaning it says it records 30p, but it imports it at 60i. Don't really understand why.
Today I tried 30p on my Canon HF-S100 for the first time. If I understand correctly it's still saving the video in 60i format -- e.g. all of the odd scan lines in one field, then all of the even scan lines in the next field. The visible difference is that you don't see the interleaving when you view the results in iMovie or Final Cut Pro.
With 30p it's as if the camera captures an entire frame at once, then saves it as two interleaved 60i fields. By contrast, when the camera is recording 60i it captures one field (every other scan line) and records that, then captures and records the other field separately.
In other words, in 60i mode, the subject may move between the recording of the first field and the recording of the 2nd field, resulting in interleave "jaggies". In 30p mode the subject doesn't move between the recording of the fields, since both were captured at the same time.
I wish I could insert some pictures to better explain myself

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

Select query differences between oracle 9 and oracle 8.

Hi,
I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
ex:
With oracle7
SQL> select 'champ1','champ2' from DUAL;
'CHAMP 'CHAMP
champ1 champ2
With Oracle 9
SQL> select 'champ1','champ2' from DUAL;
'CHAMP1' 'CHAMP2'
champ1 champ2
So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
Thanx.

Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
My suggestion is -> First Go through the basics Of SQL in general.
Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
And, finally learn the advanced commands of that DB.
You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
Anyway,
You can get the quite familier output by first type the following command ->
set lin 310Regards.
Satyaki De.

The difference between photoshop eps and illustrator eps

Before installing snow leopard, Quark Xpress could distinguish between photoshop eps and illustrator eps files when a file needed to be modified. Now all it does is open files in only one item of software (depending on which you have told it to open files in). It's very inconvenient
Anyone got any ideas?

It sounds like you may have assigned EPS files to open in a particular app. That causes anything ending in .eps to open in that app, and the OS ignores the rest of the UTI (Uniform Type Identifiers) data.
About the only way to fix it is to clear the LaunchServices database. Close all running applications. Open the Terminal and copy/paste the following line and press Enter:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Close the Terminal and immediately restart. The OS will build a new database based on the installed applications. EPS files created by a particular application should now open in that app.

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

In FCE HD swithing between HD camcorder and SD camcorder problem

Similar Messages

Maybe you are looking for