In FF 14 what program/plugin plays flv in the ff window

When a browser window has a flash file to play it opens the area on the window but never plays the file What program/plugin do I have to ahve installed to play it
I have adobe flash player 11 installed but I cannot get to it in the tools/applications app to set it as the default for flv files

There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].

Similar Messages

How do you restore the "Last Date Played" notice in the iTunes window for songs?

How do you restore the "Last Date Played" note in the iTunes window of playlists? I lost this a couple of weeks ago, and had someone explain the steps to take (which are not on the iTunes "Help" menu). Thanks.

In the playlist, Right Mouse click on the column headers and it will give you a list to choose from in the pop up select Last Played and that column will display

What program works best in cleaning the junk file out of my mac?

What program works best in cleaning, and improving the speed of my mac. It's about four years old now, any suggestions are appreciated as I am new to this.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

What program was used to create the Firefox intro video? Really good!

I downloaded Firefox for the first time and watched the overview video. It is very engaging - I'd like to know what programs were used to create it. Camtasia, Captivate, Flash for example.
Thank you,
Jennifer

My understanding is the TechNet library is a custom ASP.NET application and doesn't use SharePoint at all.
The response headers reveal the following information:
Server:
Microsoft-IIS/8.0
X-AspNet-Version:
4.0.30319
X-AspNetMvc-Version:
5.1
X-Powered-By:
ASP.NET
X-Powered-By:
ARR/2.5
X-Powered-By:
ASP.NET
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

How do I know what programs I can quit in the activity monitor?

I use a macbook 13in and run lion. Last night, I checked out the actiivty monitor and there were programs/files(?) I didn't recognize. I understand that some of these are important and quitting them may cause problems. How do I know what programs I can quit? Thanks for the help!

HellO:
IMHO, you should not quit anything. In fact, looking at the activity monitor if nothing is wrong is, IMHO, a waste of time.
Barry

What programs have been adapted to the retina resolution

I finally got my macbook pro retina in the mail yesterday after waiting 3 weeks. Now I am setting up my computer and I notice that most of them look terrible on this display, and I was wondering If anybody has a list of which programs have been optimized for the new resolution.

http://forums.macrumors.com/showthread.php?t=1397367
slightly different but same model.
What changed? DDR3, Westmere Nehalem Xeon. But with 8-core 3GHz you are set and there never was much if any in cpu upgrades.
Keep your eye on the 8800GT of course, there are only a couple graphic card upgrade options but it will accept the same as newer Mac models. and keep the RAM (FBDIMMs) down to and below 70*C - monitor the sensors with Hardware Monitor (best) and boost the fans default speed from 500-600 up slightly to higher base of 800 rpm to improve airflow.
It is still a good solid unit. Protect it. Use a 850W UPS and it should serve you and run well. The ideal RAM configuration is to use all 8 RAM slots the combination of sets should not matter. 8x1GB or mix of some paired 2x2GB or you can use 2x4GB DIMMs as long as they are Mac Pro certified and have the large RAM heat sinks.

My MacBook Pro keeps going back to the desktop every 10-15 minutes, no matter what program I am using at the time. I tried restarting but it still occurs.

Has this ever happened to anyone else? I don't know what else to do and it's very annoying and disruptive. It occurs every time I go full screen in any application.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dock single-app && killall Dock
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Test.

I'm editing a wedding that I shot for a family member but when I play it in the viewing window the top of it is cropped off but I can see the whole image in the project strip. will the whole image transfer when I make a dvd or will it crop the top ?

I'm editing a wedding that I shot for a family member, But when I play it the top of the image is cropped off in the veiwing window but it shows the whole image in the project strip. When I make a DVD with it transfer the whole image or will it be the chopped off image and how do I make sure it is the whole image ?

What version of iMovie are you using?
For 9.09..
If the image is not 720p, you might have to crop it to have freehand control over which bit gets cut off.
How to crop it...
In the project window hover your cursor over a section of the clip in the bottom right corner as seen below:
Click on the cog and open up Cropping,Ken Burns and Rotation.
Click on Crop and drag and set to where you want it to be cropped, then click Done. (Because mine isn't 720p, iMovie automatically makes it so I cannot include the black border. If you do not mind this click Allow Black.)
Glad if this helped! Please rate up.

What word do I type in the URL window to access certain options?

Help! My personal memory has been blanked. I recall there was something I used to type in the URL window to get Firefox into a rather advanced prefs /options page, but I cannot remember what it was.

Yes! That was it. I remembered it was a word or two with a colon, but I just blanked out. Thanks very much.

What program/plugin can i use to calculate and fill in the BPM field in Itunes automatically?

I have tried a few and need a automatic one as i have a few thousand songs to process.
Also a freeware one would be pure mad dead brilliant.
Many Thanks

Hi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki

What program to use to se the dimensions of my clips?

Hi, im filming in different dimensions alot. When I shoot higher framerates I can achieve slowmotion. But since the finder lacks in information about the size of the clips, im looking for something else. For some reason my adobe bridge is very slow when dealing with video. So what i need is a suggestion for a program that let me brows my clips and cataligorize them before i import them to a project.
Any ideas?

Have a look at CatDV: http://www.squarebox.co.uk/index.html

Website Interactive PDF? What programs to use out of the Creative Suite?

       We are looking to add an Interactive Pdf type of document that would pop up when prompted for online customers. They would fill in predetermined areas for text and logo uploads. This could not be downloaded by them, it would be filled in then saved to our website. Also we need to program in or be able to have the customer change font sizes and colors as well.
       We have the Adobe CC and have the tools, just not sure which program or programs would be the best to use?
       Any or multiple ideas would be great, maybe some links to examples?
       I should note that I believe our website team does not use adobe programs for coding. So I would be looking for something that could be made in an adobe program and usable on our site. We do have the adobe web suite though if needed to make something then save for later coding.
      Thanks in advance Adobe Community!!

This has nothing to do with PDF or website design as such. You need a dynamic system based on a content management system with PHP and a suitable web server.
Mylenium

What program on my Atrix recognizes the .ps extnesion, for viewing pages that have been priinted to file?

Non of the factory installed software will open the .ps files.

I don't know of any Android app that will display PostScript (.ps) files. There are a many free PostScript to PDF converters, I would think that would be the best solution.

AC3 sounds garbled when played back through the asset window

i have a 5.1 AC3 file i made with A.Pack with DVDSP3 (now using DVDSP4) and when i played the file back in my asset window via S/PDIF out on the Mac to a Dolby Digital Capable 5.1 amp (having the prefs in DVDSP set to SPDIF not default in the simulation pref window)...it sounds REALLY garbled.....i know what a raw AC3 file sounds like played back throught a standard amp (like a code-not being able to hear anything BUT that)...and the file i tried to play back was still barely understandable...but sounded like a robot. is this a bug or am i doing something wrong?

Awesome! This fix worked for me as well. I too don't know what happened after my system had been working just fine for years, then today it was all garbled. All is well now. Thanks!

Drag & Drop image of currently playing song causes the Spotify window to "jump" to another position

When I try to drag and drop the image of the currently playing song (the one that appears under the playlist list, on the left side of the screen), the entire Spotify window jumps (i.e. moves/repositions) inside the screen to a totally different position, making it impossible to drag the song to the intended playlist. It seems that the the window is moved to the current mouse cursor position (i.e. the left top position of the window becomes the mouse cursor position, with an offset). When I reposition the window again manually, and try to do the same thing, it doesn't happen. I have been able to reproduce this issue a 100% of the times: I just refocus a few other windows I have open and then try to add the currently playing song to a playlist in the afore mentioned way.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

In FF 14 what program/plugin plays flv in the ff window

Similar Messages

Maybe you are looking for