In finder I have shared ETOS-time capsule. ? What is it?
Hi...I have in my finder down the left hand bar showing what's happening...a title saying SHARED and below it is ETOS-time capsule. What is that? How can I remove it since I am not on any shared network. Help please. If you know what it is, perhaps email me or text me. ****@***********.com or ***-***-****. Thanks
<Personal Information Edited by Host>
Maybe something is named wrongly.. ETOS is simply the name someone has used.. I presume for their time capsule.. how it shows in your shared I don't know.. check its IP address.. open airport utility and see if it is detected.
Your personal info was removed so just use the forum.. that is what forums are for!!
Similar Messages
-
I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.
Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !! -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
How do I find the key for my time capsule router
How do I find the key for my time capsule router
Hello, see if these are of any help...
http://www.iclarified.com/entry/index.php?enid=4547
http://manuals.info.apple.com/en/TimeCapsule_SetupGuide.pdf
If it's the Pre-Shared Key you're looking for, open Airport Utility, under the menu item Base Station, look for Equivalent Network Password. -
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thankssgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for. -
I have a 500gb time capsule. with 100gb free. i have a 160gb macbook with 40gb free. if i get a new 500gb macbook can i keep using my 500gb time capsule?
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.
If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue. -
I just had Uverse installed. My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system]. We have connected my Time Capsule to the computer via USB cable. I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport. How can I find instructions for setting up using USB cable and Ethernet?
Thanks!
Charles LeachAll the manuals are listed at the head of the thread.
https://discussions.apple.com/community/wireless/time_capsule?view=overview
The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer. -
Finder locking up when browsing Time capsule hard drive
Finder locking up when browsing Time capsule hard drive
I am able to browse the hard drive preview some videos or open files for around 5-10 mins then Finder locks up. Internet still works and I can relaunch Finder and then works for a while again. It sounds like the hard drive is just going to sleep. I watch some films directly off of the hard drive through VLC and these just stop wilst viewing them.
I am on 10.6.2 working on the 5GHZ channel on dual band time capsule.
It is really annoying I have tried a few things like resetting the DCHP Lease. But it seems to be specific to the hard drive as the internet still works fine. It is really annoying as it jams up the finder really awkwardly.
Ant ideas most wanted
ThanksAre you browsing/viewing files in Time Machine backups on your Time Capsule, or files you've put there yourself?
If the files are Time Machine backups, use the Time Machine interface (the "Star Wars" display), via the Time Machine icon in your dock (or in your Applications/Utilities folder) to see what's there. Backups are not meant to be used; they're duplicates that can be restored in case of a problem with the originals on your system.
If the files are things you put there, you'll do better browsing, searching, or re-posting in the +Time Capsule+ forum, hiding in the +Digital Life+ section, at: http://discussions.apple.com/forum.jspa?forumID=1253 -
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
i just got a 3T external hard drive and i have moved my iTunes over to it and i have started using time capsule but when i download things can i make the downloads go directly to my external hard drive? Or make my mac ask me where it should download it to?
just change the preferecnes for whatever app you're using to download the files to the external drive
-
I have a new Time Capsule, want to use it in conjunction with an iMac G5 and a MacBook. MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Will appreciate any advice. Thanks.
you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.
-
I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?
I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so -
I have a Airport Time Capsule 2T, I would like to know if it is possible to backup all my apple divides (iMac, iPhone and iPad)?
The iMac can back up to the Time Capsule, but iOS devices like the iPhone and iPad back up to either iTunes on your Mac....or....to iCloud.
If the iPhone and iPad back up to iTunes on your Mac, then when the iMac backs up the iOS backups are sent to the Time Capsule as well. So, the iPhone and iPad back up indirectly to the Time Capsule.
The iPhone and iPad cannot back up directly to the Time Capsule.
For more information on iOS backups, see this Apple support document:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Maybe you are looking for
-
I can't activate FaceTime & iMessage on my iPad ... Would this have anything to do with already having these set up on my iPhone with the same apple ID?
-
An internal error occurred while calling 'submitReport' API. (Error: ERR_WI
An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270) We get above mentioned error message at any point in WebI Rich Client. DataSource: Teradata 12.0 (Local machine) BO XI 3.1 Client installed on local machine Universe
-
Hi I have created 7 Purchase order Document Types copying Standard(NB). when i go into print preview of Standard. i could see all the texts entered at header level. However when i go to print preview of the newly created ones i cant see the texts mai
-
Is it possible to use dependent parameters in discoverer
Dear All, Is it possible to use dependent parameters in discoverer... Like in RDF's(concurrent program) Reddy.
-
Give SQL*PLUS "password" privilege (to change other's password) to a security role
Hi, If you have DBA privileges on a database, you can also use "password" from SQL*Plus to change another user's password. (When changing another users password, you are not prompted for the users old password.) I would like to grant this function on