In Firefox 4.0.1 (Mac), where is the arrow in the url window that shows the last few visiting sites in a given tab?

Previous editions of Firefox had an arrow at the right side of the url window of a tab so you could see where you'd been in that tab before--where is it now?

You can get the drop down list by either right-clicking (or control-clicking) on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker (I believe the add-on works on the Mac, but as I do not have a Mac I can not test it)

Similar Messages

Only firefox is taking forever to open for the last few weeks

for the last few weeks, whenever i try to open firefox, it takes at least a minute to open. the process opens within a few seconds of clicking the icon, but not the window. i've watched the process (in the processes tab in task manager), and the memory usage builds very slowly. right now, firefox is open, and the memory usage is up to 115,000k. all other programs, including ie8, still open quickly, but not firefox. i have done numerous virus scans (avg, malware, spybot, hijackthis, and combofix), and they've all turned up clean. i just updated firefox from 3.6.6(?) to 3.6.9, and it didn't fix the problem.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the prefer

I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the preferences, cleaned up the file. Renamed it to another file and 2 weeks later it is doing the same thing. Luckily I had my main subjects as smart objects and it saved them. This second time I just closed it out and opened it again and it is fine. Anybody else have an issue with this? Also it runs really slow these days on my MacBook Pro Retina 2.6 Core i7 with 16gb Ram.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Spent some time trying to find a Safari download site with no success. Where is the iMac Safari download site?

Spent some time trying to find a Safari download site with no success. I found lots of Safari sites but no Safari download site. Where is the iMac Safari download site?

(The following does not apply to users of Lion OS 10.7 or later)
If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069
Safari 5.0.6 for Leopard can be downloaded from here:
http://support.apple.com/kb/DL1422
Safari 5.1 for Snow Leopard can be downloaded from here:
http://support.apple.com/kb/DL1070
Make sure you download the correct version for your system.
Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4, Tiger 10.4.11 uses Safari 4.1.3, Leopard uses Safari 5.0.6, and Snow Leopard uses Safari 5.1.x. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them, and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
Hard Disk/Library/InputManagers
Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where do I take this to near Jackson, Michigan for service?.

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where can I take my Macbook Pro for service near Jackson, Michigan?.

Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

Your welcome.
If you don't see it on the map now when you go to icloud.com and check Find My iPhone, if it is shown on the device list you can click on the device, then check the box next to "Notify me when found" (see image below) and you will receive an email when it goes back online, if ever. The email is sent to the email address associated with your iCloud ID.
There's nothing else you can do. I don't believe iCloud support can tell you it's last location either once it's cleared from the map.

When launching firefox, it no longer goes to my homepage. It goes to the last page visited while on line! Help??

When Launching Firefox it used to automatically go to my homepage! It no longer does, it goes to the last page visited on the web!
== This happened ==
Every time Firefox opened
== it just started a few days ago!! Not sure why!

Check
Tools > Options > General > When Firefox starts ....

Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. plz help

Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. kindly help

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

When I close Firefox I choose Save and Quit to save my tabs for next opening. It's not saving them the last few times, wondering why?

Upon closing Firefox it asks me if I'd like to save and quit, quit, or cancel. I always choose save and quit. I've noticed the last few times that my tabs were not saved the next time I opened Firefox, I'm wondering why. I've lost some webpages I was saving for later now, because of this.

The computer crashes, due to power failure, with Firefox running. After rebooting, Firefox has lost record of tabs. [History/Recently Closed Windows] is grayed out. So the list of tabs is lost. It should be possible for the software to keep a periodic backup of current tabs, such as, e.g., MS Word makes backups of the current file every 10 minutes, so that the tabs can be restored if the software does not make a normal exit due to a computer crash.

Where is the 'last' command in systemd?

So, the question is simple: where is the last command with systemd?
As I see sysvinit provides but can't install because of conflicts with systemd-sysvcompat.

Terminator wrote:
thisoldman wrote:Both commands are included in 'core/sysvinit'.
The OP is clearly aware of that. He/she mentioned that sysvinit cannot be installed because of a conflict with systemd-sysvcompat .
I'm a man, so he

HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

I have updated firefox SEVERAL times over the last few months and it never works. The download and setup goes fine, but I still get messages wherever I go that the version I have in not compatible and I have to upgrade. What gives???

Updated firefox SEVERAL times in the last few months and even though everything goes ok with the installation, it never upgrades! I get notices on my college website as well as other that I have an incompatible version and have to upgrade, BUT OT NEVER WORKS!!!

In the "More system details..." for your post, it shows an ancient version:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 '''Firefox/3.0.17''' (.NET CLR 3.5.30729) FBSMTWB
It could have something to do with that acronym at the end, which I think is associated with one of your add-ons.
To see your true current version, you can check Help > About Firefox.
If your true current version is 6.0.2 (today's version), then you may need to clear a setting using the about:config preference editor. Here's how:
(1) Type or paste '''about:config''' into the location bar and press Enter. Click the button promising to be careful if it appears.
(2) Type '''agent''' into the filter box and wait for the list to be filtered.
(3) Right-click '''general.useragent.override''' and choose Reset to return that preference to its default value.
Any luck?

Yesterday, since I downloaded the lastest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action. I can't hardly use if anymore because of all the window pop-ups

Yesterday, since I downloaded the latest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action". I can't hardly use if anymore because of all the window pop-ups. What can I do? Can I go back to an older version?
== This happened ==
Every time Firefox opened
== I downloaded version 3.6.6 yesterday

hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

Got a MacBook Air 128 flash storage like a month ago and in the last few days I have gon into the "get info" it says there that I have 160 GB avalibile , dos anyone know what could be going on with my Mac?

Got a MacBook Air 128 flash storage like a month ago and in the last few days I have gon into the "get info" it says there that I have 160 GB avalibile , dos anyone know what could be going on with my Mac?

This issue can be caused by a corrupt local snapshot index. The procedure below will temporarily disable local snapshots and force the index to be rebuilt.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil disablelocal
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command.
To re-enable:
sudo tmutil enablelocal

In Firefox 4.0.1 (Mac), where is the arrow in the url window that shows the last few visiting sites in a given tab?

Similar Messages

Maybe you are looking for