In Forms Unable to print output for particular billing document number

Hi All
  I am working forms
   Here I am Unable to print output for particular billing document number, I am getting Error message like 'Graphic cannot be displayed'. 
can anybody tell me the solution
Regards

Hi Chinna,
Please check that the billing document may be using different logo and which may not be avilable or not fitting in the window. (May be graphic is over flowing the window dimensions)
Lanka

Similar Messages

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • P.O number for a billing document number

    Hi Experts,
    From  which table we can find a PO number for corresponding billing document number(VF03)?

    hi RAVI,
    Go to T.code SE16
      enter table name VBRK-->enter
       billing doc type,billing doc no,s.org,d.channel
      execute
    waiting for reward points
    mcm

  • Regenerating output for archived billing document

    Hi,
    As TCODE=VF31 can not generate output from archived billing documents, I would kindly ask you if is there any other alternative standard SAP way to do it ?
    Thanking in advance for your help, best regards
    Joseph Sangoi

    You cannot print from archived documents as archived documents have to remain unchanged. Printing will create new NAST records for your document which is not possible for archived data.
    You have to care about such requests prior to data archiving. You need a general strategy e.g. printing into an archive (setting in your message conditions), which is optical archiving and often mixed with data archiving . Those optically archived invoices can be reprinted at any time.

  • Invoice prints with a different billing document number

    Hi all,
    When I try to print a billing document using TCODE VF03, it prints a different billing document.
    For example, if I print the billing document number XXXXXXXXX1, it prints the doc no XXXXXXXXX2.
    Please let me know the reason for this.
    Thanks and regards,
    Anishur

    Hi Murali,
    Thanks for your reply.
    The driver program is not a standard program.
    It is a Z program.
    Thanks and regards,
    Anishur

  • Disable print function for  a pdf document

    Is there a way to make an Adobe pdf read-only?  Can I disable the print function for an isolated document before making it available to others? I am working on MAC laptop.

    hi
    i got the answer
    we have to give issue output to -->screen

  • Where can i see the final print preview for a rfq document./ ??

    Hello,
    where can i see the final print preview for a rfq document./ ??

    check the output type of that RFQ.
    and check in ME9a.
    Regards
    Prabhu

  • Can somebody the form to put a password for open a document please

    can somebody the form to put a password for open a document please, I try to put security but appear this error "the document can not to file. trouble reading the document (14)"

    Hi there,
    If I understand correctly, you're trying to convert a file but can't because it's password protected? If so, the only way around that is to remove the password protection (which would require knowing the password).
    If I misunderstood your question, please let us know.
    Best,
    Sara

  • Deactivate COPA postings for particular billing type

    Hi
    We have a requirement that for particular billing type, values of billing documents should not flow to COPA & no posting should be made in COPA for such documents.
    Can someone please guide how to go about for such requirement.
    Regards,
    Santosh

    Hi
    Any pointers on this would be helpful.
    Regards,
    Santosh

  • Defualt Output Types on Billing Document Upon Creation

    Need to know if it is possible through configuration to default specific output types on a Billing Document upon creation. We have created a few SAP Smart Forms for print for SD Billing Documents that typically we would have users set up via transaction VA02 Goto>Header>Output. We have run into issue though becuase these users cannot have access to VA02, so we are looking for an alternative to default the output types so that from initial screen on VA03 the can go to Billing>Issue to Output and select the type. If nt standard configuration does anyone know if this has been done via custom dev.
    Thanks!

    Dear Brendan,  
    If you use VV11 and make the output type default for the given sales order type (key combination)then there is no need to maintain it every time in va02, you can get the output directly in the VF03 >sales document >issue output to.
    Regards
    Sandeep Degave

  • IDOC for Invoice/Billing document

    Hi Experts,
    Some of our customers want us to send electronic but no paper invoice to them in the coming week.
    I've investigated the process, steps are:
    1. Do some configs for message type of billing document
    2. Create KU partner profile and set outbound parameters, include Port / Basic type / Message type / Process code.
    If you have experience about this (IDOC for Invoice/Billing document) ? please kindly share the detail for me.
    Thanks in advance.
    Regards
    Sam

    Hi,
    Please check [https://supplier.intel.com/static/ap/forms/imp_gid2.doc|https://supplier.intel.com/static/ap/forms/imp_gid2.doc] this.
    This might help you.
    Thanks,
    Abhijit

  • How to get general account for a billing document ( BSEG) ?

    Hello,
    For a billing document to a client , We need to get the general account for each item of the invoice . We based on the field XBLNR of table VBRK to select a document from BKPF with condition : VBRK-XBLNR = BKPF-vbeln . If yes we will get from table BSEG for bseg-vbeln = bkpf-vbeln and bseg-posnr = vbrk-posnr . then get HKONT.
    But as you know BSEG is a cluster table, Select directly from this table is extremly long and seems impossible in our case. Could you please show me the way to do this ?
    Our main purpose is to get HKONT ( General account ) for a  billing document .
    Thanks in advance for your help

    Hi  Hoa Binh Xanh,
    Why don't you look into tables BSAD and BSID (Transperant Tables) rather directly hitting BSEG ( Cluster Table)
    Pass VBELN (Billing Document) in above two tables and get the doucment numbers and then if you need further info hit BSEG with the data you got from BSAD and BSID
    OR else Pass KOART = 'D' while selecting data from BSEG it will help in improving performance
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Excise Invoice created twice for same billing document.

    Hi All
    Excise Invoice ( J1IIN ) has been created twice for same billing document in 1 or 2 cases.
    How is this possible,if possible what is the config  to restrict the same.
    Thanks in advance
    Samson

    I dont think its possible to EI twice wrt: single billing document.
    EI created wrt: Invoice which is created wrt: Delivery document. Then there will be only one material document with movement type 601. Through which qty will get updated in Rg1 register.
    This document once utilized, cant used again.
    re-check billing document, which billing document you are using & their settings in IMG.
    Regards,
    Reazuddin MD

  • An accounting document is not required for this billing document

    Hi,
    While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
    Diagnosis:
    The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
    But the net value is coming in the sales order and alsi into the Billing document.
    gurus plz help me.
    regards,
    ragesh.

    Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
    Also please check, the posting block is activated. if it is, please remove.
    Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
    Please let me know, whether ur problem solved..
    Reward points if useful..

  • Accounting entry problem for cancel billing document

    Hi,
    We have manufacturing process  for SO to DC we follow the proces
    Sales order -> delivery -> VF01 -> J1IIN -> VF02 release to accounting,
    now when we do the above procees in billing document document flow we can see two accounting entry generated ref. to t. code VF01 and billing document number
    now to reverse the above, we are following the procedure
    J1IIN reverse -> VF02 cancel billing document  we get new cancel billing document numbver  then again in VF02 we are releasing the cancel document number,
    but earlier when we do the cancelation procedure only two accounting entries were generating under the original billing document and also under the cancel billing document,   but now as soon as we reverse the invoice in J1IIN  under the original billing document one additional accounting entry is coming which is generated ref. to T. code J1IH  document type JM , and when we cancel and release the billing document there are three accounting entery under Cancel billing document number and additional entry is created ref. to J1IH do. no. JM
    so what can be the problem hiw one entry is generated by J1IH and what is eefect of this.
    regards,
      zafar

    in billing document document flow we can see two accounting entry generated
    Yes this is standard.  One for customer debit and another accounting document for excise.
    thanks
    G. Lakshmipathi

Maybe you are looking for