In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

Similar Messages

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of

    I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of July 2013, which I did not. She said that in the system my husband took an upgrade July 29th 2013. He didn't even have a Verizon phone, he had a work phone with T-mobile. I have asked what device he supposedly upgraded to since no phones have been activated and we all still have our same phones and numbers. Remember at the time, said husband had a work phone with T-mobile. I still have the very same phone as do all of the rest of my family members. No one has upgraded. I spoke with "customer service" for more than a half an hour today, Char promised me that her supervisor (Emily) would call me back by 7:30 tonight to clear up this problem. Well guess what? No call back so where should I go from here? Any advice or help would be greatly appreciated. Thank you for your help.

    someone swapped upgrades.  Phone could have been sold For quick cash. 

  • My Mac has stopped playing you tube asking me to update flash player trouble is it is asking me for a password and I don't ever recall setting a password for this mac -!!!!!

    My Mac has stopped playing you tube asking me to update flash player trouble is it is asking me for a password and I don't ever recall setting a password for this mac …!!!!

    When the Mac was setup you had to create an administrative password.and account.  Yo have to sign into that account to install apps/plug-ins like Flash. To reset that password.
    Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
    Change the Admin Password with Mac OS X Single User Mode
    Reset mac mini admin password: Apple Support Communities

  • Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows.  The only music that works is the Sample and Theme music that comes with iPhoto.  Any idea of what to do about this problem?

    Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows.  The only music that works is the Sample and Theme music that comes with iPhoto.  Any idea of what to do about this problem?

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • "Cannot set up certs for trusted CAs" and Tomcat

    I have succeeded in downloading/installing the JCE component and writing a small java program that ecrypts and decrypts text.
    Now that I've tried to integrate this code into a web application, I'm getting the following exception message:
    java.lang.ExceptionInInitializerError: java.lang.SecurityException: Cannot set up certs for trusted CAs: java.lang.SecurityException: Cannot locate policy and/or framework files for signer restraint check!
         at javax.crypto.SunJCE_b.<clinit>(DashoA6275)
         at javax.crypto.Cipher.a(DashoA6275)
         at javax.crypto.Cipher.getInstance(DashoA6275)
    I've copied the four JAR files into the web-inf/lib directory. I believe that I need to make changes to the appropriate policy file (which I assume is the catalina.policy file under the tomcat/conf folder) but this doesn't seem to make any difference.
    Can anybody help??
    Cheers,
    Ben
    PS - I DON'T want to copy the JARs into <java-home>\lib\ext

    i've been dealing w/ jdk1.3 and jce
    installation, configuration, and exceptions for a day
    now. i've recently upgraded to j2sdk1.4.1 and i have
    the same problems:
    java.lang.reflect.InvocationTargetException:
    java.lang.ExceptionInInitializerError:
    java.lang.SecurityException: Cannot set up certs for
    trusted CAs: java.lang.SecurityException: Cannot
    locate policy and/or framework files for signer
    restraint check!
    can you give me a little more detail around your
    explanation. in particular, i can get my encryption
    code to run as a command line app using the JDK alone.
    its once i try to run the code inside of tomcat that i
    get this exception.
    so far, i've tried putting all the .jars in my
    classpath, as well as web-inf/lib, as well as
    jre/lib/ext, as well as tomcat_home/common/lib and
    nothing works.
    could this still be a provider problem as you indicate
    and how does that explain the fact that it works with
    the JDK alone?Sun's JCE 1.2.2 and their JCE Provider doing a cross checking of the classes and their signatures. In JDK 1.4 that cross validation were removed, but JCE framework still checking the signature of the provider.
    You may also need to check which JRE you are using. On windows you have two of them by default: the one within JDK installation and the another one within "Programm Files". The last one is used by default if you didn't specify the path for java command.
    I've been using BouncyCastle JCE and their provider for a while. It works just fine in web-inf\lib directory under the JRE 1.3.1. They also have the signed jar for J2SE 1.4 that does not includes JCE framework.
    Note that you have to register your provider dynamically if you going to use it in the web application. You also have to make sure that your web app has enough rights for that (check the security properties if you are using security).
    BTW, which app container are you using?

  • I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard.  So how do I get my platform to use the CS6 as my default instead of the CC one.

    I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard.  So how do I get my platform to use the CS6 as my default instead of the CC one.

    Sign in, activation, or connection errors | CS5.5 and later
    And you can change the default program for a file type under File --> Info.
    Mylenium

  • Please bring to downgrade to iOS 6.1.3! iOS 7 seems like the macintosh ago ... the beginning of the end! Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available. It's super tir

    Please bring to downgrade to iOS 6.1.3!
    iOS 7 seems like the macintosh ago ... the beginning of the end!
    Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available.
    It's super tiring to work with iOS 7!

    Submit your feedback to Apple here:
    http://www.apple.com/feedback

  • TS3694 I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this

    I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site

    If the phone has been hacked, we can not offer advice on Apple's support site.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • I have an Iphone and Itunes account already, can I set up my boyfriends new iphone on the same computer?

    Please can you help - I have an i Tunes account and an iPhone, my boyfriend has just got an iPhone, but needs to set it up and create an account. Can we do this with one comuter between the two of us?

    Does your boyfriend not have his own computer? Reason being, the iPhone syncs with ONE computer at a time. Thus, he he tries to sync with any other computer(after setting up on yours), ALL iTunes content will first be erased from his phone.
    If he doesn't have his own computer, setup a separate computer login on your computer. Let him use that login & his own iTunes account. No chance your data will be intermingled, and if things don't work out, all you have to do is delete the account .

  • I have dual boot labs that I set up up for a school.  The Partitions consist of mountain lion and windows 7.  I use bootlicker as the software for selecting the operating systems.  When I choose windows, it takes just under 2 minutes to go to the login sc

    I have a dual boot lab that I set up for a school.  The partitions consist of Mountain Lion OSX and Windows 7 Ent.  I use bootpicker software for choosing the operating system at startup.  When I select the windows partition, it take just under 2 minutes from selection to the windows login screen.  It seems to take incredibly long for the mac to "shut down and hand over the operating system to windows. 
    Do you have any suggestions on how to get this timing faster?
    Thanks for any ideas/input

    The only suggestion I can make is to look ar ReFind (previuosly ReFit). Startup mamangement is one of its features.
    But
    It is very powerful so test it for yourself before deploying it. Some of the functions are best kept out of the hands of the curious, or 'playful'
    And you never answered this question.
    Tell me what the needs are, do the users always need to choose Windows or is this a variable?

  • .bin extension defaults to wrong action and is not listed in options applications tab. I can't change the action.

    I recently installed VLC player and it has overtaken my system.
    When I click on .bin (ext) files in a Firefox browser window, the default action is now listed as "VLC.bin (default)" and nothing I do can change it. I want the default action to be to download the file and I would like to remove any option related to VLC, since no .bin file should ever be associated with that program.
    There is no listing for a .bin extension for VLC (or any other program, for that matter*) in the Options/Applications tab, nor is VLC player the default action for anything listed except .wav files.
    I have tried the following:
    1. searched the options/applications tab but found nothing.
    2. searched "about:config" for any entries with "bin", ".bin", or "vlc" (one at a time) and found nothing.
    3. searched the registry for bin extension entries. I found one:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.bin\OpenWithProgids]
    "bin_auto_file"=hex(0):
    "VLC.bin"=hex(0):
    I deleted the key and rebooted. No change.
    4. Double checked [HKEY_CURRENT_USER\Software\.. Gabest and Mozilla keys for anything that could be causing this behavior.
    Found nothing.
    Any help would be appreciated.
    *As far as I can tell. However, the applications tab cuts off many of the extension names and the column cannot be extended, so I can't be certain. VLC added 34 extensions to the list (!), most of which default to using the Quicktime plugin 7.6.8.

    Thanks jscher2000, I tried your suggestion, but no joy (as expected). None of the extensions were .bin, and in fact, I can't find a single listing for handling the .bin extension in the entire (unfiltered) list.
    That's why I'm so confused. Where is Firefox getting the name "VLC.bin (default)" from in the first place?
    cor-el, I checked out the link that you posted.
    I don't have an entry for "browser.download.pluginOverrideTypes" and the entry "plugin.disable_full_page_plugin_for_types" was empty (default setting).
    My bad, but I forgot to mention in my first post that I had also tried renaming the mimetypes.rdf file in my "Application Data\Mozilla\Firefox\Profiles\xxx.default\" to .old to no avail.
    Firefox created a new, almost empty file, but it didn't change the behavior for .bin files. I removed the new file and put the old file back in place after determining that clearing the file did not help, since I am otherwise happy with my current file-type options.
    However, since the option to "Always perform this action" is grayed-out, I am looking into the possibility that the website is sending a misconfigured MIME type or is assigning "Content-Disposition: attachment" to the download. What's odd, though, is that I've never had problems getting binary files from the site in the past, and the problem started when the VLC player was installed.
    I'll post back after I check into the server header data.

  • My macbook air died suddenly and I have a new one with Yosemite. How do I download the Adobe Design Premium CS5.5 that I had purchased for the old machine?

    I have a replacement macbook air operating on Yosemite. How do I download and install the Adobe Design Premium CS 5.5 that I had on my old machine? Can I do that or do I have to pay for a new version?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • When I have multiple browser windows open - but in the "minimized" mode - and I want to open up one of them for viewing, ALL of the windows automatically open as well. How do I prevent this annoying function. I cannot find it anywhere in the options.

    This does not appear to be a system issue, but rather a functional aspect of the browser windows. E.g., if I have 7 browser windows open to different sites... and all are Minimized, and I decide to open one to study, THEY ALL POP OPEN automatically. I am using Firefox v3.6.8 on Windows 7. This is an annoying behavior of the browser, and I am sure it can be somehow "turned off" but cannot determine how to do that. I have looked through all options. I am not a techie, but have reasonable proficiency with software apps.

    This can happen if you drag a tab slightly down in the browser window while clicking.
    Firefox has a feature called tear-off tabs
    You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
    You can also do this via the right-click context menu of a tab: Move to New Window
    You can drag that tab back to the tab bar in the original window to undo that detaching.
    * https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

  • In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

    I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

Maybe you are looking for