In full update not getting all records

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hi
Please post the query in relavent forum. (BI)
You have posted in MM forum for BW help.
Regards
Ramakrishna

Similar Messages

Full update not getting all records from PSA to ODS

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hello,
Look at this example:
R/3 Record:
CustNo | Name | Order | Amount
1234 | Customer1 | Order 1 | 100
1235 | Customer2 | Order 2 | 200
1234 | Customer1 | Order 3 | 300
If Cust.No is Keyfield, In BW you will get 2 records
1234
1235
If Order No is Key field, you will get 3 records.
It is not necessary to get the same no of records as they are in R/3.

Not getting all records in pagination

I am also have a problem getting all records in the report as the post on Apr. 21,2004. My reports pagination stops at 500. When I set the 'max row count' to 100000. The pagination at the bottom of my page disapears. When I leave 'max row count' empty, it only goes from 1-500. No way to view records past the 500th record.
I see there was a post on Apr. 21, 2004 about the same thing but it did not specify a fix or work around or if I'm missing a setting. (also tried the log off/on but did not help).
*My pagination Scheme is 'Row Ranges 1-15 16-30 in select list(wiht pagination)'
*My report has 1000+ records.
Thanks, Paula

The actual number of rows supported by the select list depends on how many rows you show on each page. If you go with the default of 15 rows, you would be able to use the select list with close to 5000 rows. If you increase the number of rows per page, the select list will work with even more rows.
If the select list can't be used, it may make sense to consider using the "row ranges with set pagination" style. Set pagination lets you navigate from one set to the next instead of one page to the next, so you can navigate through your result set a lot quicker.
However the best option for reports with that many rows would be "row ranges x-y", without showing the total number of rows. The reason is that the report renders a lot faster if you don't have the total number of rows calculated. In order to better be able to find certain records, I would recommend a search field on your report page that lets you filter the result set.
Hope this helps,
Marc

CUBE Not getting All records from DSO

Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
Sam

Why multiple threads ????

Not getting all records in reports

Hi ,
I'm using reports 6 version
and i have a report and in that in the trailer section i have a repeating frame which should written 46 records. but in the out put it showing me only 31 records remainin records are not appearing. i guess that page can display only 31 records but its not going to next page and displaying the remaining records.
if any one can help me pls do.
thanks in advance

This is the Forms forum.
Please post you question in the [url http://forums.oracle.com/forums/forum.jspa?forumID=84]Reports Form I'm sure the guys over there can help you more.
Regards
Tony

I have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

i have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

Not getting all of my email

Somehow, I'm not getting all of my email (via iCloud). My wife forwared an email to me, I got the "ding" but no email. She sent it to another IMAP account that I have and I got it just fine. She repeatedly tried to send it to my .mac account and nothing is received. Sometimes during the day, I hear the email "ding" but no mail is received. The biggest problem is subscribing to various developer forums that require replying to an email to finish the subscription. I'm hung up in never-never land. I get a lot of mail from a lot of sources with no problems - just not sure if it's 100%. Running Mac Mini 2011 with Mountain Lion 10.8.2, iCloud with .mac/.me/.icloud email account. I don't know if this is an iCloud or mail.app problem. Any ideas? Thanks.
Message was edited by: SunnComm
Update: I guess it isn't mail.app because I don't get these emails on my iPhone 4S either.

Hey, Toad, thanks for the links. Yeah, I saw the Macworld article but I didn't think these email had anything of a nature that would trigger iCloud's spam filter. But, the Macintouch article I had not seen and it tells me a lot.
I guess I'll have to plot some strategy on how to handle this stuff.
What is crazy, though, is that I get the *ding* but no mail. I tried using the Activity window, had my wife send the the email, but the Activity window contents just fly by and the window clears. If the Activity window had a Clear button for the user to use, it might be more helpful. Duh!
Anyway, thank you very much for responding. I'll re-register with my development forums using a different name and email address.
(I might ask my wife to send her email to her iCloud account and see if it makes it.)
Kind Regards

Not getting all my mail

I have an Imac and an Ipad WIFI and use a Time machine base station WIFI. I also have two email accounts, both on the same ISP. The Imac is not turned on most of the time and I use the Ipad for most of my daily computing. The problem is the Ipad is not getting all my mail messages from the server. Whenever I start up my IMAC, I get more messages that the Ipad received. I have done a full reset on the Ipad, but as yet can't fix the problem.
Any ideas??

Very long shot - which might have something to do with it. The downloads are set to 25, and I don't refresh the load button. However, that is only part of the answer I think. This morning, I sent out two email messages to a group, of which I am on the list, and one my Ipad I received only one. Alos, one of the things that happens is that my wife is the other account. And we belong to a community which has a server which bounces email to all members of the community, when we send the server an email. Quite ofen, one of us will get the mail, but not the other, and it is not consistent as to who gets the email.
Fun isn't it???

IPhone 5 not getting all texts from Galaxy S6

My girlfriend is having a problem not getting all of my texts. As far as we know, it is only happening to texts from my phone. They are showing as sent on the Galaxy S6, but do not show up, ever, on her iPhone 5. The missing messages are random.

Hi there
I’m sorry to hear that there have been some issues with receiving texts. I’d be happy to look into this for you! Can you please send me a private message by Clicking Here and include the following information?
Full name
Cell number
Recipient’s number
Best time to call
Thanks,
Charise

Mail not getting all messages from server and other strange behavior

Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
Boz

Hello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Personnel Admin AdHoc Query not retrieving all records

Hi, I recently added a custom info type to a copy of the SAP ad hoc query for Personnel Admin by using the menu path in SQ02>Edit>Change Infotype selection . The query is picking up the new info type and runs fine but does not retrieve all records from the table for a given personnel id. It only retrieves 1 record per id.
Has anyone dealt with this before and have an easy/quick fix for this?

Have other users try the query, preferably a user with end user authorization.
I've had this issue before, I'm an IT person and I customized a Standard infoset.
During testing, I'm only getting 1 (in my case) Insurance record per employee.
The end user can see multiple record per employee.
Btw, did you customize a Global or a Standard Infoset?
Regards,
Olekan

Not getting all required samples

Hi, I'm new to Labview and don't understand why I'm not getting all the samples I ask for.
I have a USB-6212-BNC module collecting data from 2 analog voltage inputs. I'm using ai0 for the analog trigger, using basically the same VI found as an example here: https://decibel.ni.com/content/docs/DOC-11764
The problem is that I am not getting all the samples needed. As you can see in the example below I only got ~1000 samples when asking for 2000.
Attachments:
Sample Issue.png ‏23 KB
Sample Issue.vi ‏30 KB

Hi bigdoug,
the output of the graph is what you get from the (missing) subVI calculation.
The DAQmxRead is configured to read 2000 samples and it surely does so as you would get a DAQmx error message instead...
Please check your subVI or attach it here with some meaningful default data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

In full update not getting all records

Similar Messages

Maybe you are looking for