In future Java or ABAP?

Hi
With the introduction of the Java stack in the latest releases and the enhancements made, can anyone tell me if Java will replace ABAP or not? Is there a possibility?
If not, how the future will be like, with respect to ABAP and Java?
Thanks
Arun

hi guru,
    we were used on 4.6B,C and enterprise portal 4.7E and kernel 610,620,630,640 we are used ABAP stak.from Netweaver 2004SR1 onwards we are using ICM ie Java stak GUI is 700.present days Java stack is better than ABAP.because in future NW is very valuble than other so JAVA is better than ABAP and also In NW JAVA connectivity is must.
i hope it is healpfull to you.
regards,
reddy

Similar Messages

  • Communicate link between Java and ABAP Stack for https

    I have configured https in both the java and abap stacks (we have a double stack configuration).  Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions. 
    The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
    I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name).  Where is this configured?  Any help is appreciated..

    Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
    Regards,
    Henrique.

  • ESS - Web Dynpro Java or ABAP

    Could anyone pls tell me about the Web dynpro part of ESS/MSS. In which language it's written, i mean in Java or ABAP. Pls send me some links for the starter to learn ESS/MSS.
    Thanks,

    Hi Experts
    We have a customer which are currently running a SAP NW Portal (7.0) and are
    Currently upgrading to ECC. 6.0 enh.3. They would very much like to use the org.plan iview in the current ESS business package to the portal, based on Java. But we have heard that the ESS business package should be converted to web dynpro for ABAP in the future releases. Does that also applies to the current org.plan Iview?
    Should we advise the customer to wait until the business package is available in Web Dynpro for ABAP, or will the org. plan Iview stay in Java?
    Thank you for taking your time..
    Regards CC
    Edited by: CC on Apr 1, 2009 2:53 PM

  • Newbie asking on future of the ABAP Language.

    Firstly, I am a newbie and would appreciate your kind patience.
    Thank you.
    I would like to kindly ask your expert oppinion on the future of the ABAP programming Language.
    I read that the ABAP language will be phased out with the JAVA language ?
    Is this for real ?
    Do you mean that to tell me that all the hard years spent mastering ABAP will all be worthless in the coming few years ?
    Any feedback would be well appreciated.
    I hope I have not attracted any flames by my newbie question.
    Thank you so much for your time.
    Andy

    Hi Andy,
       It is not true, nobody is saying or in anyway indicating that Java will replace ABAP. Java is being introduced in SAP Netweaver platform as an additional language. Java has some great strenghts, so does ABAP. This is a typical programmer worry, why can't we accept the fact many languages can co-exist (and they are, if you look at the industry as a whole VB, VC++, C#, PHP, PERL etc). Today with SOA we are moving toward a service oriented world, where all that will matter is what service you are providing (not the platform or least the language used to develop it).
    As an individual you should not concern yourself too much with programming language, move yourself up in value chain . Think about business solutions, not languages. If I look back at my short career of 6 years as SAP professional, I probably spent not more than 1 year learning the language itself. But rest of the knowledge I gained working with ABAP applies to any language.
    Read some trends -
    1. Latest version of mySAP ERP the most significant application in SAP portfolio is enhanced with ABAP not Java.
    2. Currently the most popular application mySAP CRM, mostly developed using ABAP.
    3. APO, BW are all on ABAP.
    4. Collectively 99% of SAP Application's business logic is on ABAP.
    Even if SAP wants to replace ABAP with Java they will go bankrupt if they try to do it and it will be a disaster because application's  worth comes from it's maturity and maturity comes from usage over a long period.
    So my dear friend Andy please sit back and relax. Build upon what you already have rather than throwing it ways.
    Cheers,
    Sanjeev

  • Java and abap stack connection

    Hello,
    how to check connection b/w Java and ABAP stack.
    I am getting below error :
    SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
      <SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
    We did some upgrades of kernel and jvm and started getting this error.
    Please suggest

    Hi,
    Check this threads
    JCO_SYSTEM_FAILURE
    JCO_SYSTEM_FAILURE
    JCO_SYSTEM_FAILURE . Pls help
    Regards
    Ramesh

  • CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

    I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
    -  SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
    Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
    Could you please, confirm that the archives in the sdn downloads are correct!

    I also have the same problem, CRC error:
    X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

  • Netweaver Data base instances for Java and ABAP

    Hello Experts,
    Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
    Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
    If yes..the any idea about what are those schema differences??
    - Rajan

    Hello Krishna,
    Thanks for the reply.
    Is there any way I can access these shemas? Are they the same by structure or there are major differences?
    My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
    Any help will be greatly appreciated.
    - Rajan

  • Call java from ABAP

    JCo connectivity is used to call RFCs from Java. can i call Java from abap?
    thanks in advance.....
    regards,
    Sundararamaprasad

    Hi Sundar ,
             This link will surely give u an idea about calling java fro ABAP using Jco.
    http://www.thespot4sap.com/Articles/SAP_Netweaver_Java_Connector.asp
    regards,
    aravindh.

  • Call to metod in java from abap

    Hi,
    there is a way to use method of java  in abap ?
    Regards

    If you search Google for
    ABAP jco outbound
    you should be able to find a wealth of info - for example
    [SAP Java Connector (SAP Library - Components of SAP Communication ...|http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/frameset.htm]
    Jonathan

  • BI setup: WebAS ABAP Setting - Java to ABAP communication problem

    Hello,
    i've got a problem during intallation of BI in Netweaver 2004s. The Diagnostics & Support Desktop Tool reports errors in WebAS ABAP Settings. These errors are:
    - "Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018)"  with the suggested solution "Check Connector Connection of System Object in Portal System Landscape". What does it mean?
    - "Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination <destination>" and "Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination <destination>" with suggested solution "Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway." Run of transaction SM59 returns no errors.
    Further i've take a look in the log 'dev_jrfc.trc' and there i found the errors:
    - Exception thrown by application running in JCo Server
    java.lang.RuntimeException: Bean RSRD_MAP_TO_PORTAL_USERS not found on host <host>
    - Exception thrown by application running in JCo Server
    java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host  <host>
    - Exception thrown by application running in JCo Server
    java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXY not found on host  <host>
    Can these errors be the cause of the WebAS ABAP Setting error displayed in the Diagnostics & Support Desktop Tool? How they can be solved?
    Thanks for your help,
    Martin

    Hello Chetan,
    thanks for your response. Maybe i've described my problem not clear enough. There is no problem of installation and usage of support & dektop tool, but of installation of BI. The support & dektop tool indicates the errors described above with no other hints. My questions is, if anybody knows, what is the cause of the errors and what i must do, to install BI correctly.
    Cheers,
    Martin

  • Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

    Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
    I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
    unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
    Thanks & Best regards,
    Jeroen Engelen
    SAP Netweaver Technology consultant

    Hello all,
    You have to follow instruction on this side>
    http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
    YOu need to download
    part1 > which is soft from NOvell called
    SAP Test Drive "SLES10SP1VSAP.rar"
    Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
    After donwload from sdn part two
    SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
    from sdn Downloads.
    YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
    But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
    So at this point I am stuck
    Here is the same qeustion from Jim Jiang  and me
    what is user name  and password for SLES10 SP1 SAP Version
    Hope this give you overview what needs to be done, to start up Trial SAP version
    Peter Nechala

  • Error while creating connection between Java and ABAP

    Experts
    I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
    5. The host name s09f71v06.svr.bankone.net was resolved successfully.
    6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
    I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
    Please do let m eknow where do I need to check for the errros or logs for the above error message.
    Appreciate your quick help.
    Mahesh

    Check the relevant services are test are active on the Backend system through SICF trransaction.
    Also make sure that default icm services are running.See note 517484.
    More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
    Regards
    Ajay

  • SMSY for ERP JAVA and ABAP Stack

    Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
    I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
    I am using Somlam 7.1 on Oracle Linux system.
    ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
    J12 and T12 systems are connected via JCO.
    SLD has been defined for both stacks and they are using the local SLD for the SolMan.
    Your help is much appriciated.

    Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
    In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
    I was reading SAP Note 1344564, It states
    III.Some Main Instances include other Main Instances (E.g., in SAP
    ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
    EP Core.). If the including Main Instance is installed, it's not
    necessary to mark the included Main Instance(s) for relevance.
    Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
    Your input is appreciated.
    Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

  • JAVA and ABAP stack support pakages

    Hi,
    I am new on installation of solution manager server.
    I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
    I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
    Thanks Reza

    Hello Reza,
    Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
    So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
    follow SAPnote # 19466 for help.
    Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
    I hope that makes things clear.
    Best Regards
    NIraj

  • Java and ABAP Stack

    Hi All,
    I am still not clear about role/function of java and abap stack in XI.
    Can anybody explain?

    Sireesha,
    Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
    The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
    Most of  XI pipelines happens in the ABAP stack.
    All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
    please go through links::
    ABAP and JAVA in Netweaver stack
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

Maybe you are looking for