In GATP would like to push schedule delivery date+1 day

Hi Experts:-
We have below requirement in GATP:-
Can we maintain a condition record for pick /pack time = 1 day against Shipping Point in particular Location.? In other word we would like to push schedule delivery date+1 day.
In APO we can see control data :- Plan (LEAD), load (LOAD), pick/pack (PICK), transport (TRAN), unload (UNLD)
In APO We have maintained value = 24:00 for location XXXX ( as per below steps)
1.     In the SAP Easy Access screen choose Master Data ® Master Data for Transportation and Shipment Scheduling ® Create Scheduling Step.
2.     Select a condition type.
3.     Enter concrete values for the key combination.
4.     Enter a duration (external display: hhhhhhh:mm).
While checking order, When the process branches into APO ATP, can see time 24:00 This seems to indicate that Pick/Pack record has now been found, but the scheduled delivery date is not being pushed out by one extra day.
Looking at the condition log in APO shows the following;;
Lead Plan:304 Access for Access sequence LEAD missing(Usage U)
Pick Pick : 208 Condition record has been found
Load Load: 304 Access for Access sequence LOAD missing(Usage U)
TRAN Transport: 009 Condition record is missing
UNLD Unload : 002 Access not made ( Initialized field)
Can you suggest.

Hi DB,
Thanks, Very helpful links.
I did some testing on various sets of data change in APO for PICK and TRAN :-
Parameters :-
Order creation date     2-Nov
Route YR0004= 4 days
Calendar :-Sat and Sun holidays & 11th Nov bank holiday
Test 1 with 0 Day pick time, No TRAN maintained :-
Delivery date     8-Nov
Gi Date     7-Nov
Loading date     7-Nov
MAD     7-Nov
Transportation planning date     7-Nov
Test 2 with 1 day pick time, No TRAN maintained :-
Delivery date     8-Nov
Gi Date     7-Nov
Loading date     7-Nov
MAD     4-Nov
Transportation planning date     7-Nov
Test 3 with 3 day pick time, No TRAN maintained :-
Delivery date     8-Nov
Gi Date     7-Nov
Loading date     7-Nov
MAD     2-Nov
Transportation planning date     7-Nov
Test 3 with 5 day pick time, No TRAN maintained :-
Delivery date     9-Nov
Gi Date     9-Nov
Loading date     9-Nov
MAD     2-Nov
Transportation planning date     9-Nov
Now next scenario only TRAN without PICK
Test1 with 1 day TRAN time
Delivery date     8-Nov
Gi Date     4-Nov
Loading date     4-Nov
MAD     4-Nov
Transportation planning date     4-Nov
*with 2 day and 3 day result is same as test1
Test2 with 4 day TRAN time
Delivery date     8-Nov
Gi Date     3-Nov
Loading date     3-Nov
MAD     3-Nov
Trasnportation planning date     3-Nov
Test3 with 7 day TRAN time
Can see Delivery Date moving ahead one day.
Delivery date     9-Nov
Gi Date     2-Nov
Loading date     2-Nov
MAD     2-Nov
Trasnportation planning date     2-Nov
Now next scenario is to maintain data in both PICK and TRAN
Test 1 with 1 days pick time+ 1 day Tran
Delivery date     8-Nov
Gi Date     4-Nov
Loading date     4-Nov
MAD     3-Nov
Transportation planning date     4-Nov
Test 2 with 1 days pick time+ 6 day Tran
Delivery date     9-Nov
Gi Date     3-Nov
Loading date     3-Nov
MAD     2-Nov
Trasnportation planning date     3-Nov
Would like to know is this the correct standard behaviour or something wrong with our system config.
regards
Samir
Edited by: Samir Ali on Nov 3, 2011 4:07 PM

Similar Messages

WIP or CoS if scheduled delivery date not fulfilled

Hello,
SD-order.
The checkbox "Fixed date and quantity" within the Schedule lines table has following effect on costs:
- if the checkbox is marked and there is no confirmed quantity to the delivery date, all costs are settled from WIP to the CO-PA - I have heard that this has background in law, because if the delivery date is not fulfilled the customer is not obliged to accept the delivery.
Please, confirm if this is true.
What would happen if the mentioned checkbox is marked, the quantity is confirmed, but the SCHEDULE DELIVERY DATE IS PAST AND NOT RE-SCHEDULED?
I would expect similar behaviour like in the first case, but I have tested it and the costs are still in WIP.
Thanks
Regards
P

Dear Comes,
Kindly check whether the factory calender maintained for your plant and shipping point is maintained for your Sales organisation and i think you can also assign it for storage location. So make sure all the factory calender are same.
regards,
Sudhir

Scheduled Delivery Date

Hi Guys
I have an issue with the scheduled delivery date being determined incorrectly.
If an order is created with the required delivery date of saturday or sunday, the system is confirming the schedule lines for that day/date. The factory calendar has been setup with working days (Mon, Tue, Wed, Thur and Fri), plant and shipping point have been assigned the same factory calendar. Based on the calendar the system should not confirm it for the weekends.
Also if i create the order for the current week with the delivery date of weekend(saturday/sunday) then the system pushes it out to to monday but if i create it for the next weekend or following month weekend then the system confirms it.
Can someone suggest the possible solution??
Thanks

Dear Comes,
Kindly check whether the factory calender maintained for your plant and shipping point is maintained for your Sales organisation and i think you can also assign it for storage location. So make sure all the factory calender are same.
regards,
Sudhir

I would like to use Formcentral form data to populate a pdf with the same fields. Is that possible?

I would like to use Formcentral form data to populate a pdf with the same fields. Is that possible?

Randy,
We have an application that I would like to have in Formscentral. That application is also in a larger PDF file that once filled in populates all the other forms below it (lease, credit check form, ect). If the Application on Formscentral keep the same field names as the pdf can I pull the data from formscentral and sill populate the old application pdf so that all the forms below it will be also populated.
Greg

CoreServicesUIAgent would like to access your calendar data

Hi all,
three days ago, I received a strange Mavericks pop-up: "CoreServicesUIAgent would like to access your calendar data".
Then I went to the Security PrefPane, and saw CoreServicesUIAgent clicked.
Strange, so I decided to unclick, although I checked within the CoreServices folder that is was still an App by Apple.
Apparently no change at all.
However, everytime I change an event in iCal on a googlemail calendar account, it will not appear in iCal anymore.
Through Google Calendar webview, I can still see it, but not in iCal anymore.
And I can still see it on my iPhone.
So I disabled the calendar in iCal through the Internet Accounts settings, rebooted, clicked back on "CoreServiceUIAgent" in the Security PrefPane, rebooted, enabled the calendar back in iCal.
No change.
Some questions now:
- where could I find the preference file associated to Security (in order to check whether the "CoreServicesUIAgent" listed in the PrefPane is indeed refering to the Apple App inside the CoreServices folder)?
- why is CoreServiceUIAgent trying to get access to my calendar?
- why did it suddenly appear and not before?
- why is iCal such a pain now with Google Calendars?
Any help would be much appreciated ...

I have been havig trouble with iCal repeatedly prompting me to add a new event on its own. Recently to try and fix this I deleted my calendars, preferences and caches. I then picked up my calendars from iCloud. Within about an hour of running iCal again, I get this prompt to allow CoreServicesUIAgent.app access to my calendar. I said yes and almost immediately I get one of these unwanted add new event dialogs again. Ah hah I think.
I have been unable to find out what CoreServicesUIAgent.app does and why it needs access to my calendar, but it does seem to be the source of my unwanted automatic adding of new events issue. I went into the Security and Privacy Setting and disabled CoreServicesUIAgent.app access to my calendar. I am now waiting to see if I get any more of those unwanted adding new event prompts. If I can't detect any loss of functionality, I will just not give CoreServicesUIAgent.app access to my calendar.

HT204088 Would like to know the exact date that a song was purchased using my iTunes account.

Would like to know the exact date a song was purchased (not billed because I changed my payment status) on my iTunes account

You should be able to view the purchase history on your account via your computer's iTunes, as per the HT2727 page that you posted from : If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
On your iPad you view a cut-down version (the last 90 days) via http://reportaproblem.apple.com
Both show an item's purchase date

Recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

Are you sure? I restored my new iPod from the backup of my iPad and all app data was restored to the new iPod.. App data is part of the backup.
iPhone and iPod touch: About backups

Schedule Delivery Date in Sale Order

Dear All,
I have an order on 03.11.2009 (today) and its last delivery date is 15.11.2009. It means that I have to deliver the complete order on or before 15.11.2009.
So where can I put this date in Sales Order?
Regards,
Vishal

Hi Vishal,
Your Last Delivery Date can be entered in the "Requested Delivery Date" field in the sales order.
By doing so, the system will give us a confirmation that whether the delivery can be made possible on the Requested Delivery Date or NOT (The status can be seen by going in to the Schedule Line Level of your line item).
The system also gives us the NEXT POSSIBLE DELIVERY DATE with the confirmed Quantity as a Second Line item in the Schedule line level.
The System considers mainly the Material Available Date to come to a conclusion on the Delivery Date of the goods. Also, there are other activities (Loading Time, Transporation Planning Time etc) for which some time will take and that also need to be considered (The same can be seen by going in to the Schedule Line Level of your line item and then click the Shipping button).
Your Scenario: In your case, the delivery can happen ON OR BEFORE the Last Delivery Date.
So for that follow the steps:
Step 1: Put the Last Deliv Date in to the "Requested Deliv Date" field in Sales Order.
Step 2: After enetering the other necessary details in the sales order then Save it. Now go the Schedule Line level of your line item and look for the Confirmation of the Delivery Quantity on the Requested Delivery Date.
If Yes: Then its your wish that you can Prepond the Delivery Date by giving the required Delivery date during your delivery document creation.
If No:
Then you have look for the Next Possible date. OR Make sure that you can manage all your other activities like Loading, Transporation Planning etc. in 10 - 12 days time and make your material Availabilty today and do the delivery.
Reagrds

Delivery schedules delivery date in future-GR

Hi all,
For the Me38 Maintain delivery schedules, we will maintain delivery date and schedule details.
We can make GR for the current and past date through MIGO. But when we try for future delivery date, it will show no selectable items in MIGO with reference to the scheduling agreement. I guess this is std behavior. So they have the option for changing the schedule to the current date and then post MIGO again. The user feels it to be time consuming. So want to have a message just a warning while Migo and then proceed GR.
Is it possible to meet?
Rgds

it is the nature of a delivery schedule to have accurate timing.
However for all that do not like that .........you can achieve what you want with an user exit.
For details see OSS Note 741385 - Goods receipts up to current date for scheduling agreements

Schedule Delivery Date in Sales Order

Hi All,
Does anyone have any idea, how can I determine the date on which a line item material can be delivered, if I know the Material Availability date. After a material is available, it takes some more time for Loading, Pick-Pack, Transportation... which may take a couple of days.
Please share if anyone have any fair knowledge to determine the Delivery date for the Material. I need to do a forward scheduling with that information.
Thanks
Ipsita

Hi Ipsita,
Delivery date arrive based on Material available date, Transportation date, GI date, Loading date and if you have material available for inventory you can create delivery and pack and hold in WH.
<REMOVED BY MODERATOR>
Regards
JACK
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 9:38 AM

Scheduled delivery date according to customer calendar

hi all,
i maintained a customer calendar with only friday as work day, and assigned it to customer in uploading point in customer master data.
when creating sales order, the system checks the customer calendar with the date proposal from sales order type, and display message "No goods accepted on 2008.11.19. The next possible date is: 2008.11.21". that means customer calendar works, but the system didn't change the date proposal to 1121, and further, it didn't change the schedule line delivery date accordingly. it give and just give a message out.
i need the system calculate delivery date or schedule line date under the restriction from customer calendar, not just give some message.
i once make it out that the system automatically changed the schedule line into two line, say, the first line is 0 pc on 1119, and the second line is 10 pc on 1121. but afterwards, i can no longer reproduce the result.
can anybody give me some help on it? thanks a lot.
daniel

Daniel,
I'm not sure but you may want to try it out. Deselect the Propose Delivery Date option in the Sales Document type and then try. Maybe the system in proposing the date because of this configuration and is not changing as per customer calendar
Regards
Nadarajah Pratheb

Access.log separator character is tab (tabulation in french) would like to have space and date format

Hi, I'm french (excuse me for my bad english)
I work with weblogic v.12C
I reach to produce the access.log rotating daily whith several information (ip statut ...)
1) I have a problem : the different information present in the file access.log are separate by a tab (tabulation) I would like to have space separator ' ' !
It is possible ? who can I do ?
2) the date present in the access.log file is actually like that : dd/MM/YYYY (elf-fields-> date) hh:mm:ss (elf-fiels -> time)
dd/MM/YYYY and hh:mm:ss are separate by a tab (tabulation)
I would like to have this format      :    dd/MM/YYYY hh:mm:ss (a space separator), , what i have to put in elf-fields to do so ?
Or I would like to have this format :     [dd/mon/yyyy:hh:mm:ss +0000], who can i do that, what i have to put in elf-fields to do so ?
remarks :
->on the web i read this :
The Common Log Format is the default log format used by WebLogic..
... remotehost RFC931 authuser [day/month/year:hour:minute:second UTC_offset] "request" status bytes
when i put that in elf-fileds : [dd/MM/YYYY:hh:mm:ss] it that doesn't "work" I have - in my acces.log file in place of the date .
-> first line of my acces.log file :
Format : Extended
Extended Logging Format Fields : date time cs-method cs-uri sc-status time-taken cs(user-agent)
thanks in advance for your help.

Hi, I'm french (excuse me for my bad english)
I work with weblogic v.12C
I reach to produce the access.log rotating daily whith several information (ip statut ...)
1) I have a problem : the different information present in the file access.log are separate by a tab (tabulation) I would like to have space separator ' ' !
It is possible ? who can I do ?
2) the date present in the access.log file is actually like that : dd/MM/YYYY (elf-fields-> date) hh:mm:ss (elf-fiels -> time)
dd/MM/YYYY and hh:mm:ss are separate by a tab (tabulation)
I would like to have this format      :    dd/MM/YYYY hh:mm:ss (a space separator), , what i have to put in elf-fields to do so ?
Or I would like to have this format :     [dd/mon/yyyy:hh:mm:ss +0000], who can i do that, what i have to put in elf-fields to do so ?
remarks :
->on the web i read this :
The Common Log Format is the default log format used by WebLogic..
... remotehost RFC931 authuser [day/month/year:hour:minute:second UTC_offset] "request" status bytes
when i put that in elf-fileds : [dd/MM/YYYY:hh:mm:ss] it that doesn't "work" I have - in my acces.log file in place of the date .
-> first line of my acces.log file :
Format : Extended
Extended Logging Format Fields : date time cs-method cs-uri sc-status time-taken cs(user-agent)
thanks in advance for your help.

Sales Order- scheduling delivery date for Procurment type F

Hi Expert,
In material Master , in MRP 2 View mailtained data as 1. Procurment type- F, Plant Storage Loc- 1140, In-House Production- 21 days, GR - Processing time-1 days. But while creating sales order for this material it shows only one day difference in sheduling delivery date.
Thanks in advance.
Manoj

Hello
Procurement type F is for external production indicator
If you want to see a change in schedule accordingly, then maintain Planned Deliv. Time.
As per SAP, Planned Delivery Time in Days is Number of calendar days needed to obtain the material or service if it is procured externally. If you have different vendors for a material, you must specify an average value. The same applies if you order the material from a fixed vendor that has varying delivery times.
Or in sales doc type, maintain Lead time in days, this specify the number of days after the current date that the proposal for the requested delivery date in the sales document should be.
FYI - GR Processing Time, Goods Receipt Processing Time in Days is number of workdays required after receiving the material for inspection and placement into storage.
Thanks & Regards
JP

I would like to programatically set the "Date Unused" on X Scale formatting for time plots.

I can use the X Scale formatting on the front panel, but when I change from time to decimal using property nodes the "date" keeps showing up. How can I turn the date feature off so I just see Time in HH:MMS format?

Disregard. I found the answer. Set the XScale.Format value to 6 (relative Time). feed in total seconds from start of day to the Xo, The reciprocal of data frequency to DeltaX, and set the decimal resolution to 3. This results in a time tagged plot showing just time (no Date).

I would like to see my daily data usage for January 2015

How can I see my daily data usage for the month before the current one?

Sign into My Verizon. View bill. Change to date period desired. Click DATA tab. Under the Data Type drop-down select Data Usage. You can see day by day and approx what time and how much data was used. You can change the data from KB, MB, and GB. Probably easier to use MB to add it up. You can also use an app in the Play Store, if using an Android that can monitor your use and let you know daily, weekly, monthly use and what apps used that data. I'm sure Apple has something similar if you use an iPhone.

In GATP would like to push schedule delivery date+1 day

Similar Messages

Maybe you are looking for