In gmail, clicking on any message, gets "Loading..." forever after upgrading gmail to google+. Fine on non google+ gmail account

see title. completely repeatable. onset was definitely right after upgrading my gmail account to google+. Without google+, gmail works as expected in Firefox. WIth google+ it works fine in other browsers.
About reports 33.0 Mozilla firefox for Ubuntu canonical - 1.0
Ubuntu reports 14.04

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

I want to email photos on a different email system, gmail. How can I get the email icon of iphoto to put my photo on a gmail email?

I want to email photos on a different email system, gmail. How can I get the email icon of iphoto to put my photo on a gmail email?

If you have Mail setup a a client for your Gmail account set iPhoto to use Mail. Then select one of Mail's stationary templates for photos and use it. May not be as good as the iPhoto templates but will be fancier than a plain email window.
Click to view full size
OT

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Did it work in Firefox 4, or did you skip that version?

How do I turn off messages on my iMac after upgrading to Yosemite?

How do I turn off messages on my iMac after upgrading to Yosemite?

Hi,
Open the Messages app.
Go to the Preferences item in the app's Menu.
Select the account pane in the Preferences.
Each active account should have a tick in the Enable this Account box.
This can be unticked.
This will stop accounts logging in but will not stop the app Launching in certain circumstances.
First of all check the app is Quit before shutting down the computer.
The fact the app is open even if all windows are hidden can cause the app to restart when you Start up the computer.
Messages is a Multiple window app and using the red button on the top left of a window only closes that window and does not Quit the app.
Also check the System Preferences > Users and Groups > your account > Login Items tab.
This will list items that are set to Start up when the computer does.
I have a couple of External Drive on other computers, some Anti Virus software and the common iTunes Helper plus an old version of TextExpander that will work if I launch the Preference Pane this way.
9:44 pm Saturday; October 18, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have the Itunes match but am getting radio ads after upgrading. How do I get the Itunes radio to play ad-free again?

I have the Itunes match but am getting radio ads after upgrading. How do I get the Itunes radio to play ad-free again?

Hello fortcoins,
It may help to turn iTunes Match off, then back on.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match
http://support.apple.com/en-us/TS4054
Cheers,
Allen

My ipod touch getting much slower after upgrade to ISO 5.1.1

my ipod touch getting much slower after upgrade to ISO 5.1.1
could it be downgrade? or how to solve this problem.....

I checked settings-->general-->about-->diagnostics & usage --> diagoostics & usage data, finding that almost every time I use the ipod touch, it sufferred the low memory issue after upgrading to ISO 5.1.1
will ISO 6 help? or will it get the ipod slower even than ISO5.1.1.1?

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
Check this thread if you wish to see what I am talking about.
https://discussions.apple.com/community/mac_os/os_x_mavericks

My Hp Ency laptop gets super hot after upgrading to windows 10

Hi there,As I mentioned , my laptop gets very hot after upgrading from windows 8.1 to windows 10.Is this a known issue?thanks Payam HP ENVY TouchSmart 15 Notbook PC

Is it an AMD graphics card? If so, it's an issue with the new AMD drivers that a lot of people have been having. Report this issue to AMD: http://www.amdsurveys.com/se.ashx?s=5A1E27D25B93E7EE

I can't load modules after upgrade

I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
What can I do now?

You were right robot5x. After command lilo I have got modules loaded properly.Thanks.

Ever since I upgraded to FF 16.0.2 Gmail will not allow me to click on any message. I get this error "Oops- the system encountered a problem (#405)-Retrying"

Google Chat still works on the page, but I cannot access any message and the window does not refresh to show new messages. I am on Windows XP SP3 and have not seen any issues until the upgrade to FF 16.0.2 last week. I also have not installed any new software nor have I made any changes to my internet security software. I can access Gmail through IE8 and on my phone so it is not a Gmail issue.

If it happens again then try these steps:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When I open mail I get a list of the messages received but when I click on a message it does not displaying the main window. I have 2 different mail accounts

Just bought a new MacMini(my first Apple PC) and when I open mail I get the brief details of mail received but whe I click on the message to read the details I get a "loading" sign but the message is not displayed.
Any help for a Dumbo would be appreciated.

Very strange, do you have any AV or Web filtering apps like Norton installed?
Do the working accounts use a different Port or Authentication than the non-working one?
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995

ITunes fails to connect to store or iPod software update server despite working network, fails on multiple networks - no error message, just loads forever.

Hey everyone,
I have iTunes 10.4 and an iPod touch. I have always had trouble with synching my iPod.
Right now, iTunes will not connect to the iTunes store. When I try to synch my iPod touch, it gets stuck in "Step 2: Backing Up," and the bar loads forever. I've left it alone for several hours and it has not made any progress. When I try to restore the iPod, or update it, iTunes gives me an error message that it "Cannot connect to the iPod software update server. This has happened despite being connected to the internet, on both my school network and my home network.
I've tried messing with the hosts file in the System32/etc. folder as the website instructed on the apple website, but that did not solve the problem.
Recently, several parts of audiobooks I have have also become unplayable on my iPod, despite being able to be played on iTunes. The parts are listed but are grey and cannot be selected.
I recently copied a bunch of audiobooks via flash drive from my sister's computer to my iTunes - could this be part of the problem? They were from an Audible account that I don't share.
Thanks!
-Allison

Your iTunes stores and sync problem solution here:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Getting warning message in my webmail after upgrading to snow leopard

Hi,
After upgrading to Snow Leopard Server, I'm getting strange warning messages in my web mail,
Find the warning messages below, Looking forward to your support.
Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 420
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 95
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 347
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 289
Thanks,
Gulab Pasha

The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
SL may have taken the initiative and quarantined what it determined were borked fonts and put them aside to avoid calamity.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
That said, rumor has it that the next update will correct some spurious font handling....best to wait if housecleaning doesn't help at this time.

Web Access Not Loading Completely After Upgrade

We recently upgraded from TFS 2012 Update 2 to TFS 2013 Update 4.
After the upgrade, users are having intermittent issues trying to load Web Access - for some users, only the header loads, but none of the information below (like work items, for example) loads - the entire screen basically stays blank.
This is happening on different browsers for different people. Clearing caches has worked for some users and not others, and for some people the problem has come back after being able to load Web Access normally a couple days ago.
I do see this error popping up when debugging:
No define call received from module Presentation/Scripts/TFS/TFS.DataServices. This might be a problem.
What can I do to correct this?

Hi Brian,
I'd like to know if you see any error message in the pages of team web access. Also check event logs to see if there any useful information.
For this situation, you can have a check whether your upgrade without issue. Run TFS best practice analyzer to check if there any configuration issues. Make sure you have configured TFS 2013 features after upgrading. Refer to this
page for more information. If the issue still exist after taking the methods, please elaborate more details about your scenario with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.

Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana

In gmail, clicking on any message, gets "Loading..." forever after upgrading gmail to google+. Fine on non google+ gmail account

Similar Messages

Maybe you are looking for