In having trouble connecting internet to my router

Everytime i try to setup my router it says cant connect router to internet.any help????

Who is Your Internet Service Provider ?
What is the Model no of the router ?
I guess you are trying to run the CD.You can setup the router manually...try this link

Similar Messages

  • Having Trouble Connecting to new wireless router...

    My family just purchased a wireless router. It is a D-Link. Previous to this, I had always used an ethernet cord to get online as I am right now. The router is all set up and I was using the wireless end of it for awhile with no problem until my dad secured it and added a password. I wrote down this password and have been trying to reaccess the wireless internet and it just keeps telling me that the password is incorrect when I know its not because I'm sitting here looking at it on our dells computer screen.
    I didn't know if there was something that I needed to do to my macbook that i havent since I have always used an ethernet cable...but I don't know what that would be since I have been to other individuals houses and linked up to their wireless glitch free. The router came with a cd. I opened this cd on my macbook, and the contents of it weren't even compatable with my mac, other than the manual which was not helpful either.
    This router is SUSPOSE to be for Mac users, and it worked before the password was set so I am just at a loss.
    Any help would be greatly appreciated.
    Message was edited by: jacquienicole11

    Hi Jacquie,
    First: are you sure you've selected the right security protocol when OS X asks you for the network password? There's a dropdown menu with options such as "WEP, WPA," etc. You'll need to select the right one for your network. If you pick the wrong one and enter the password correctly, you will still get a "bad password" error.
    Second: Are you sure your router is not MAC-locked? This has nothing to do with Macintosh computers. a MAC address is something every wireless card in every PC has. It's a unique address that is assigned to your computer. If your router is MAC-locked, that means it's set to ONLY allow certain addresses to connect. You'll need to disable the MAC-lock or enter your MAC-address into the "approved" list in the router's settings page.
    Third: The problem is NOT your Mac. As you said, it's worked just fine on other wireless networks. The problem lies absolutely, completely, without question in the router settings. Try the two things above and see if that solves it. If not, come back and we'll keep going.

  • Having trouble connect to 5Ghz router. ROuter by Amped wireless.  No issues with 2.4Ghz, having trouble connecting AppleTV to 5Ghz router. Router by Amped wireless.  No issues with 2.4Ghz

    I am using 2nd Generation AppleTV.  Like ot use 5Ghz singal for streaming.

    Only the iPhone5 and newer supports 5Ghz wireless, do you have such an iPhone model?
    The ATV Gen 3 supports 5Ghz, I've found nothing that says definitively whether the Gen 2 supports it or not.
    Confirm that the Mac and iPad both support the 5Ghz standard. 
    This is a fairly new standard, so unless the device is less than a couple years old it's unlikely the devices support it.

  • I am having trouble connecting to my in-home internet via wireless router. It says it is connected, but when I try to open email, no connection is found. This also occurs for Safari and Facebook. I am connected by Charter Cable.

    I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable.  This only occurs on my IPad. My desktop works fine.

    Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
    Push the reset button (if present) on the cable modem
    Power off the modem by pulling the power cable
    Remove the internal battery from the modem (if easily accessible)
    Power off the AirPort Extreme and every other device on the network....order is not important
    Wait at least 20 minutes....longer is better
    Re-install the battery in the modem if it was removed previously
    Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
    Power up the modem and let it run 4-5 minutes buy itself
    Power up the AirPort Extreme and let it run 4-5 minutes
    Then power up each other network device one at a time about a minute apart
    Check for a good Internet connection on the network with all devices
    If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
    Pull the power plug from the back of the AirPort Extreme
    Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
    Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
    Then open AirPort Utility end reconfigure the AirPort Express again.

  • I'm having trouble connecting my Intel iMac with the internet using wifi router

    I'm having trouble configuring my iMac to accept a connection with my Telstra Elite mobile broadband Wifi router.
    The iMac's Wifi is turned on and the elite router is selected in the Wifi list with a tick.
    The router is turned on, and connected to the internet.
    I'm able to surf the net and collect emails using my MacBook Pro ( what I'm using now) and my iPad with no hassles by connecting them to the Telstra Elite Wifi router. But I'm unable as yet to get a connection using the iMac.
    The Telstra router accepts up to 5 simultaneous connections.
    At present the display on the router says that three devices are connected. They being the iPad, the MacBook Pro and the iMac.
    Can anyone help me out?
    Gregory

    hburgess3 wrote:
    I'm having trouble connecting my apple tv to the wifi on my campus. To connect to this wifi on a computer or iphone you have to install a program.
    Why?
    Contact the school IT department,

  • I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!

    I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  This just started happening today (2/19/14)!  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!  BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops.  Again, HELP!!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Having trouble finding internet connection on computer

    I'm pretty technically unsavvy so forgive the laymens language - any help would be appreciated.
    trying to upgrade my phone/ and internet to cable and the cable guy is telling me that there's something wrong with my computer (of course). They are saying they do not see an internet ethernet connection. I used to use it for dial up I know it there and have Internet explorer on my desktop - can anyone help - the installation disk is fine until it gets to the network point then says having trouble connecting to your network -
    ibook - clamshell/blueberry/300 MHZ G3/512K/OS9.2   Mac OS 9.2.x  

    Ok so I went home and checked the TCP/IP and it was on ethernet already. I also had an IP address, subnet mask, router, and a name server address - but no DHCP address.
    However, when I tried to install again (because I'm stubborn) I got this message: Could not renew your TCP/IP lease. An application on your mac is using your DHCP port (what is that?). Contact your network Administrator - who's that is that me- I'm the only one who uses the computer.
    Help again. thanks in advance.
    Liz

  • HT4199 I need help connecting to my WIFI.  I purchased a new router and am having trouble connecting.

    I need help connecting to my WiFi.  I purchased a new router and am having trouble connecting.

    your gonna want to contact your internet service provider for the best info on setting that router up.  but for connecting to wifi on the iphone, ipad, and ipod
    go to
    settings > wifi
    then choose your connection and enter the password

  • My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    - Did it successfully connect to the network before?
    - Do other devices successfully connect to the network now?
    - Does you iPod successfully connect to other networks?
    - Have you reset your iPod?
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network connections: Settings>General>Reset>Reset Network Settings
    - Powered off and then back on your router
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
    -When you restored you iPod did you restore to factory defaults/new iPod?  If not try that.
    - If you look at the network properties on the iPod what IP address is assigned when you think you are connected but actually have no internet connection.  If it starts with 169 then the iPod never connected to the router, the 169 address are self assigned.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

    My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

    Same issue here too.  I will try reinstalling the firmware update.  This has happend to me twice.  The only way to correct the issue was to reboot.
    Thanks!

  • Virus??? computer having trouble connecting to internet

    Last week, my son's school computer got a virus, and sent me about 50 copies of the same email message. Since then, things have not been working properly on my macbook. Safari is telling me it can't connect to the internet, even though the network diagnostic tool tells me there is no problem. Mail is having trouble connecting too, and my idisk is suddenly inaccessible. I wanted to restore to a previously saved backup of my personal settings that I have been saving to my idisk but backup said it couldn't connect to the idisk. Backup also gave me a scary message when I had no choice but to abort the "restore".
    I've seen lots of messages here claiming that there are no mac viruses, but if that is the case, what could be going on here? I already rebooted several times, and repaired permissions on the hard drive. any other suggestions???

    Hey, Mort, thanks. I did find clamxav last night on the web and left it running this morning (I'm at work now.) So we'll see what it has or has not found when I get home later. It didn't allow me to just run the software on my whole hard drive, though, I had to choose folders. I chose the system and library. Do you have any other ideas about where the virus (if it is a virus) could be living?
    I'm not sure if my system has been updated. I run "software update" once a week so perhaps it has already happened. I'll check tonight.

  • I am trying to activate LR6 on a laptop that will not be connected to the internet.  I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet".  I never get there.  H

    I am trying to activate LR6 on a laptop that will not be connected to the internet.  I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet".  I never get there.  How do I get it to generate the code that I can take to an internet enabled device so I can validate it?

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

    Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
    Chuck's Dilema

    Hi Chuck,
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.
    Also...
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

Maybe you are looking for

  • How to Change the Folder Name in Workbook

    Hi there I have a situation, I have created the workbook in existing folder (ORDER) in TEST business Area, now I have to move this report to another Business area (Custom) which has folder (Custom Order Folder), how can I change workbook folder name

  • Need help with my TSST CORP CD DVDW TS L633M ATA device - it don't function at all!

    Here is my setup: PC: HP Pavilion dv6 1233eo entertainment notebook pc OS: Windows Vista sp 2 Processor: Turion X2 dual-core mobile RM75 2,2 Ghz Ram: 4 GB DVD-drive: TST corp CD DVDW TS L633M ATA My DVD won't work at all! I can't tell what had happen

  • Diversity and trying to conver two different areas

    So the whole purpose of diversity is to provide/improve coverage in a same area.  Basically two antennas placed with a reasonable distance from each other and the concept is that one antenna might receive a better signal than other and then both sign

  • Doubt abt query outlines

    I am working on performance issue in my project.I want to create stored outlines for the query fetching the results.But in user_Outlines table a, under category default the outline is shown as USED .How can I make this USED for my query? If I have se

  • Download the Flash builder preview 1 or 2, port 2.5- 2.6 autoupdate

    Anywhere I can download the Flash builder preview 1 or 2, why?, see: http://www.mcbrearty.me.uk/index.php/2011/05/07/auto-update-air-2-5-to-2-6/ And the SDK are tied to the preview FB, so that's why I need FB also. Regards Martin