In-house production with on-line publication and external procurement C5

Dear SAP Gurus,
I need to configure PPDS to immediate transfer in-house production orders but to have periodical transfer for external procurement, do you know how to do this?
Thanks and BR
Andre

Hi
Goto Spro-APO-supply chain Planning-PPDSGlobal setting-maintain global parameters and defaults-
Transfer to R/3 Inhouse Production- Always create transfer event
Transfer To R/3 External Procurement- Do not create transfer event.
To transfer external procurement periodicaly you can use /SAPAPO/RRP4 go to change mode and click on transfer order.
Have a small test from all angles before going ahead with this approch. As you need check whether changes to already transfered purchase requisition get transfered to ECC if not how you will identify such orders and send it to ECC.
May I know what is buisness reason for such requirement because I seen requirement to transfer inhouse production and external procurement only on conversion but heard of such requirement first time.
Regards,
Santosh

Similar Messages

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

Hello! I am attempting to register a product, my iPad, to my adobe products with its serial number and I am being told that the serial number is invalid. I am certain that the serial number is correct, and am unsure how to proceed.

Hello! I am attempting to register a product, my iPad, to my adobe products with its serial number and I am being told that the serial number is invalid. I am certain that the serial number is correct, and am unsure how to proceed.

apart from the fact there's no way I could have answered your question confidently, I was also not able to supply my non-answer within your very tight time constraints.
what happened? how'd you get on?

Audio sounds damaged. I have tried with both built in and external speakers.

Audio sounds damaged. I have tried with both built in and external speakers. I think its a problem with a driver or something.

Try a PRAM reset:
http://support.apple.com/kb/HT1379
Ciao.

Permission problems with command line CVS and Java CVS App

Greetings,
I'm part of a moderately sized website development team which recently upgraded to MacBook Pros (dual core) running OS 10.4.9. One of the primary tools we use in our day to day work is the open source concurrent versioning system (CVS). We've noticed a distressing issue running CVS on our macbook pros: there seems to be a problem with the way these new machines handle permissions on the directories/files that CVS uses to manage files.
The error occurs when the CVS application, in this case both command line CVS and GUI CVS application named SmartCVS, tries to rename a temporary file named Entries~ to its new name Entries (no ~). It looks like this:
java.io.IOException: Could not rename file
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries~ to
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries
at smartcvs.JP.a(SourceFile:125)
at smartcvs.JP.a(SourceFile:113)
We've noticed that if we open up a get info window on the directory we're downloading, and choose "Apply to enclosed items" right when we start the download process, the issue will be resolved, presumably because the permissions are being set on the subdirectories as the download is taking place.
We've checked the permissions on the overall ~/Sites/ directory numerous times, and they always seem to be set correctly as drwxr-xr-x. It's within this folder that CVS creates a directory with the CVS module name and downloads all the contained files, so we don't see why it would be having issues completing this successfully. We also checked to ensure the GUI CVS application is running under the current user on the machine: it does.
Has anyone run into issues like this in the past? Is there more information I could provide to further clarify the problem we're having?
Thanks for any input you have!

Thanks for asking Jeff, yes one place we are seeing this error is Java application SmartCVS, though the results posted here are from a normal command line CVS checkout.
===
Checkout command:
cvs co [MODULE]
===
Error:
cvs [checkout aborted]: cannot rename file CVS/Entries.Backup to CVS/Entries: No such file or directory
===
ID:
uid=502([USER]) gid=502([USER]) groups=502([USER]), 81(appserveradm), 79(appserverusr), 80(admin)
===
LS -ALN
Computer:~/Sites [USER]$ ls -aln
drwxr-xr-x 28 502 502 952 Jun 4 13:11 Sites
Computer:~/Sites/[MODULE] [USER]$ ls -aln
drwxr-xr-x 38 502 502 1292 Jun 4 13:33 www_root
Computer:~/Sites/[MODULE]/www_root [USER]$ ls -aln
drwxr-xr-x 32 502 502 1088 Jun 4 13:33 [SUBDIR1]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1] [USER]$ ls -aln
drwxr-xr-x 5 502 502 170 Jun 4 13:33 [SUBDIR2]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2] [USER]$ ls -aln
drwxr-xr-x 4 502 502 136 Jun 4 13:33 [SUBDIR3]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3] [USER]$ ls -aln
drwxr-xr-x 6 502 502 204 Jun 4 13:33 CVS
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3]/CVS [USER]$ ls -aln
total 32
drwxr-xr-x 6 502 502 204 Jun 4 13:33 .
drwxr-xr-x 4 502 502 136 Jun 4 13:33 ..
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries.Log
-rw-r--r-- 1 502 502 48 Jun 4 13:33 Repository
-rw-r--r-- 1 502 502 63 Jun 4 13:33 Root
MacBook Pro / MacPro Mac OS X (10.4.9)

WRT160N - problem with on-line games and downloading

Hi,
Several months ago I bought a WRT160N router and I have a strange problem.
When I play online games, such as QL, and someone else will start downloading from the Internet, from time to time about 10 sec I have 999 ping
I turned on in the background ping to the router, and from time to time about 10 sec there are 2-3 ansewers with 1900-2000 ms.
I tought that when I buy router with N-mode everything will work better, and there will be no problems with on-line gaming.
Is there any way to fix this problem??

I checked now and even no one is downloading there is the same problem.
I checked on other router and it works fine.
Next problem is when I browse youtube and play several films simultaneously, suddenly there are no responses from router, when I close them, and wait for a moment the responses are back.
Whether anyone had similar problem??

Sound Issues with macbook pro 13" and external display

Hey guys I have a 13" macbook pro from mid 2012 with 8 gb ram and the i7 processor. About a year ago I bought a thunderbolt to hdmi adapter and hdmi cable to use my 32 in tv as a monitor. It worked flawlessly and I never experienced the flickering issue people have been talking about. The tv is only 720p so the picture wasn't as clear as it should be. I was also tired of using a pullout desk and thought the 32 in was a little too big so a couple weeks ago I added an entire desk setup in the corner and bought a brand new 24 in Vizio E241i--a1 and mounted it on the wall as a monitor. This tv is the full 1080p. Ever since then, I have had trouble with the sound playing from the macbook>displayport-hdmi adapter>hdmi cable>monitor. I select the monitor as the output device and sometimes it will actually play and sometimes it will not. I mostly use the macbook in clamshell mode when at my desk but sometimes I have both screens on. No matter what if the sound has stopped working it will not go back. If I select the macbook speakers as the output then it will play through the macbook speakers. But once I switch back to the hdmi output for sound it still will not work. The only thing I can do to fix it is to leave the macbook in clamshell mode and then restart it causing the monitor to be the main display at boot up. Once I got the new tv, I also started experiencing the flickering issue people have been talking about with the external monitor. I know it is not because of Mountain Lion because I had Mountain Lion when I used my old setup and never experienced either of these problems. Any ideas on what could be going on? Thanks in advance

Did you format the external drive for use with OS X?
Open Disk Utility. Does Disk utility see the connected drive?
Format it to "Mac OS Extended (Journaled).

Parallel MRP run for Internally and Externally procured materials

Hello all,
we want to run MRP with different settings for externally procured materials (create purchase Requisition) and internally produced materials. The choices provided my MRP run is either create planed order or Requisitions when run background. Is the activation of user exit M61X0001 the solution to this issue? I can recall that we had done this is some project in the past, not 100% sure to be sincere. Can anyone help on this?
Thank you for any help.
Edited by: Ioannis Salichos on Aug 11, 2010 11:51 PM
Edited by: Ioannis Salichos on Aug 11, 2010 11:57 PM

you are right, this is the user exit that can be used to control this.
see an excellent "how to use" from R Brahmankar
in this thread:
Re: mass MRP run

SC with Limit line items and Desc requirements _Incorrect Overall Limit

Hi,
When i create SC ,combining both limit items and non-catalog items (desc requirement), i am getting my PR created.
However, i observed that for Limit lines in PurReq, the expected value & Overall limit amounts are not being transferred correctly.
Overall limit is also showing as equal to expected value. This is happening only when i combine limit and full text lines together in a sc. It seems like a bug. We are on SRM 55 and patch 11.
Appreciate any inputs.
Thanks
Krish

Hi Karthik,
Thanks for your reply. I already checked these notes and they are not relevant for my issue.
My issue is like this. SC has got 4 lines and out of them 2 are Limits and 2 of them are describe req's lines.
for one of Limit line, overall limit is 1000$ and expected value is $500.
where as in the Purreq, i am getting both overall limit and expected value as $500 itself. basically overall limit is overwritten with expected value.
I found very old note something simillar to this issue: 304382.. its the otherway happening in my case.
Thanks
Krish

Problem with new-line-character and java.io.LineNumberReader under AIX

Hi folks,
I got the following problem: I wrote a little parser that reads in a plain-text, tabulator-separated, line-formatted logfile (and later on safes the data to a 2-dimensional Vector). This logfile was originally generated by an AIX ksh script, however, I copied it on my Windows machine to work with it (for I'm using a Java editor that runs under Win Systems).
For any reason, Windows, and what is worse Java too, seems not to recognize correctly the new-line character (in the API it is written that this should be a newline '\n' or a carriage-return '\r' or one followed by the other) that marks the end of a line in the logfile.
Also, when I'm opening the logfile with the "Notepad"-editor, this special character does not seem to be recognized, every line is inserted right after the other.
On the other side, when I open the logfile with the built-in editor in the CMD-Shell ("Dos-shell"), the newline chars seem to be recognized correctly.
But when start my parser on the AIX-machine the newline does not seem to be recognized correctly again.
I tried to read in the logfile with MS-Excel and safe it as a plain-text, tabulator-separated, line-formatted logfile again, with such files my parser works fine both on the AIX as it does on Windows.
Any ideas? Anybody got over the same problem already?
Greetz FK

Under windows, text files' lines are usually delimited by \r\n,
under Unix/Linux/AIX etc. \n
and under Mac \r.
I recommend to use the following editors, which are capable to handle files with Unix and Windows-styled line-delimiters or convert between these types:
Programmer's File Editor (PFE; available on Windows)
The Nirvana Editor (http://www.nedit.org/; available on Unix, MAcOS, Windows)
(BTW good old vim can handle that too. Transferring text files to windows in order to edit them, even using Excel for this purpose means your being a UNIX newbie, (I mean no offense by writing this) so vim is probably beyond your reach for the moment.)
Java normally assumes the platform's line delimiters where it is running, so if you transferred the file from Unix to Windows might be distrurbing.

How to handle same product with different part numbers and pricing in SAP.

I am a new user and want to learn if the following scenario can be handled by SAP.
Our business buys a product from a supplier which has 2 different part numbers and prices. It is the same product. One is the primary product whilst the other is available only as an upgrade option with a different part number to a mainline product at a cheaper price .
Our issue is that we sometimes buy the upgrade option with a mainline product to get the better price even though these go into stock. Basically we need to have the items linked with both part numbers in SAP at different prices but inventory both in and out only going against the primary part number. Any ideas?

Thanks Jitin
I did give them different part numbers and then attached a Bom containing the primary part number against the upgrade option however I really need to have the secondary item as a sales and purchase item but non inventory so the stock comes from the primary part. Ideally if we receipt the goods in as the secondary number the inventory goes to the primary part. If the second number is an inventory item then I have the issue of the same part with different part numbers sitting in stock at different prices and having to rely on employees understanding the difference.
Sorry to be so confusing. I will do some more testing over the weekend and see if I can find a suitable solution.
Thanks
Martin

Vb type in house production with controls on Max stock level, considering -

Dear friends,
Please think of possible solution to map the follwing scenario,
my client having vb tpe scenario for in house mfg product, As the it reaches to re-order level it generates planned order ,
eg mrp type -vb, reorder point-200 ,min lot size -150 and max lot size 500,
and Max stock level - 1500 and his lotsize -EX,
here after creation of planned order he wants a control , that when it is converted to process order , in change mode , he should able to change the order qty in such way that , it Need to consider open process orders and Available Stock
(Unrestricted & Quality) also in same Plant
e.g. Max Stock Lvl is 500 Unrestricted Stock 100 Quality Stock 50 open
ProcOrder is 200. If user trying to change ProcOrd 250 it should allow
to change ProcOrdr of 150 only.
please sugeest how to set the controls.

Hi Dhar,
In av. check scope (OPJJ), include the stocks which you wish to consider eg: quality insp. stock etc in addition to unrestricted stock. The system will then create planned orders only for the needed items.
If user tries to change the qty of the order to more than required, MD04 will show an exception message. Hope this meets your need.
If helpful award points
Regards,
Vivek

IMac G4 with no Line In, and no Soundpref.plist

One day, I simply had no more Line-In on my iMac G4. Trying to use my guitar emitted this horrible high pitched shrill in Garageband. Some tooling around brought me to the System Preferences instead of the Garageband preferences. In the Input pane, there is only the Internal Mic. Did some research, and heard everything from it might be blown, it might just be a loose connection, to it may be an account issue, or even just a Preferences issue.
Someone suggested deleting that Soundpref.plist file, and letting the computer remake it upon a restart. I tried to locate that .plist file. The oddest thing was very quickly apparent - it wasn't there. That's right, I didn't have a Soundpref.plist file. Everything else is there, but there is one extra file with an odd name that's not on my iBook with the same OS. They each have 33 files in the main Preferences folder.
To be sure I wasn't just missing it, I copied the one off my iBook. Still nothing after Verifying and Repairing Permissions. I'm going to soon check my Time Machine from that computer to see if it's there at any point in the past. Very odd issue. In my past troubleshooting, Archive & Install and Erase & Install didn't solve the problem either. I'll also try creating a new user to be sure the problem isn't just on my account later on.
In the meanwhile, any thoughts? Has this happened to anyone else?

The noise is not feedback. It actually has nothing to do with my distance in relation to the mic. It is however sort of a 'feedback' sort of noise, just not actually feedback. It is obviously not trying to go through the output. Headphones don't bypass the issue. It's a matter of not having a Line-In option in System Preferences.
I have had this problem for months. There is no simple solution I haven't tried to resolve this. To clarify, I'll list the fixes I've tried.
Tried wiggling / cleaning the jack, swapping cables, swapping guitars, checked System Preferences (no Line In), checked GarageBand Preferences (no Line-In available), tried SoundStudio / Audacity, Archive & Install / Erase & Install, restore from very old Time Machine backup, create a new user, Verify / Repair Permissions, run maintenance scripts, copy another Soundpref.plist file...
Anything I'm missing? Some setting or something simple?

Relation with Contract Line Item and Billing Plan

Can a Billing Plan have more than one Contract (Sales Document) Line Item ?
To detail, for example, a Billing plan is X and it has three Plan Items 1,2,3. Can there be situation where Billing Plan X:Item 1 is set up for Contract A:Item 10 and rest of the Items i.e. Billing Plan X:Item 2,3 are set up for a different Contract B:Item 20 ?

yes , we can

Problem with command line arguments and multiple targets in ant

Based on the argument value,I have to create properties file .I am using the key value pairs present in the properties file in my build.xml file.
Here the problem is , I am able to create the properties file,using the argument vaue.i.e.,
ant -Denv=build-dev copy.
ant build-all.
it works fine,but if i want to call another target which uses the propeties file ,at the time of passing argument is failing
ant -Denv=build-dev copy build-all
why it is happening ?
My build.xml file
<project name="AntParam" default="copy">
<target name="copy">
<fail unless="env">You must specify the env property when you run ant.</fail>
available property="env.prop.file.exists" file="${env}.properties"/>
<fail unless="env.prop.file.exists">Cannot find ${env}.properties file.</fail>
copy file="${env}.properties" tofile="build.properties" overwrite="true"/>
</target>
<target name="build-all">
<property name="one.dir" value="${project.home}/two" />
</target>
</project>
"${project.home}"--------this value I am getting from properties file.

i find solution.

In-house production with on-line publication and external procurement C5

Similar Messages

Maybe you are looking for