In IDOC_INPUT_DELVRY - At Wht point DELIEVRY UPDATION completed??

Hi Experts,
Am using IDOC_INPUT_DELVRY.
I put my code in the CUSTOMER-EXIT003 for to get CONFIRM the Transfer Orders via IDOCs, fine, working.
but, if mean time, if the DELIVERY is changing for some reason at the same point, IDOC is failing.
So, request u that, let me know that, Wht is the correct point/spot to put my custom code, so , by that point, already the DELIVERY UPDATION SHULD COMPLETED.
wht is correct spot for my code?
thanq

Not sure what you are trying to do inside the customer exit , but you can put a explicit lock to the delivery by using standard FM and then release the lock at the end of your code so that this delivery will not be changed by others during Idoc execution.
Could you explain more about what you are trying to do inside the exit .
RB.

Similar Messages

  • No Message: InfoCube Update Completed

    BW Gurus,
    I trying to load Data from PSA to the Cube Using DTP...during the data load, for certain data package the data load is keep on going and there is no error message as such and its still yellow status and under the "Updating to InfoCube ZXX_XX" node ,after the "Write to fact Table tasks "..
    There is a message saying "No Message: InfoCube Update Completed" could anyone help what is the cause for this issue and also fix ? is it a problem with the amount of data load ?
    Thanks,
    Raman

    I got below error in the ST22 dump....
    "Database error text........: "ORA-00060: deadlock detected while waiting for
    resource"
    Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
    I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
    Any help will be greatly appreciated...
    Thanks,
    Raman

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • Xy graph in PDA module does not plot points or update

    The XY Graph for PDA does not plot points or update. Input data is simple cluster of floating point data (x,y)in while structure. The axes scale properly with Configure PDA XY Scales.vi. Cursor legend also OK. Checked line and point attributes-OK. Running 7.0F1 and pocketPC2003. Please help.

    Garret,
    Can you attach the VI so that we can see it? If you think it is a bug in the toolkit, rather than a programing thing I would suggest sending an e-mail to NI. In addition are you using eVT 3 or 4 or both?

  • HT201407 iphone 4 update complete asking me to follow few more steps and connect to wifi. Now my wifi is not working how to resolve this problem

    iphone 4 update complete asking me to follow few more steps and connect to wifi. Now my wifi is not working how to resolve this problem

    what happens when yu try to connect to wifi?

  • Details Data in SAP BI could not be updated completely: see log

    Hi ,
    I need some help, while creating the campaign i am getting below error
    Details Data in SAP BI could not be updated completely: see log
    Diagnosis
    A problem occurred as data was being saved in the BI system.
    System Response
    The data can not be completely saved in the BI system.
    Procedure
    For more information about the reasons for this, see Messages
    I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
    SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
    But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
    Appreciate if you please help me on this issue.
    Regards,
    Raj Mittal

    Hi ,
    I need some help, while creating the campaign i am getting below error
    Details Data in SAP BI could not be updated completely: see log
    Diagnosis
    A problem occurred as data was being saved in the BI system.
    System Response
    The data can not be completely saved in the BI system.
    Procedure
    For more information about the reasons for this, see Messages
    I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
    SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
    But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
    Appreciate if you please help me on this issue.
    Regards,
    Raj Mittal

  • How to place a break-point in update rules

    Hi All,
    Can any one let me know how to place a break-point in update rules. I used the hard code BREAK-POINT in the code, but it did not work out. After placing the BREAK-POINT in the update rules code, I executed the info package and the load was successful. In order to go into the debug screen can any one let me know the procedure.
    Regards,

    Hi,
    In the monitor screen goto "details" tab and under the "Processing" select the option "Data Package 1" and right click over that you can find an option simulate update.
    In that select the option "Activate Debugging in Update rules" and select "Perform Simulation".
    You can search for your code using the option ctrl+F and double click the code over there.
    now the breakpoint is set.
    Hopr this helps.
    Regards,
    K.Manikandan

  • When I try to update Elements 9, I get an error message even though it appears to download the update completely. Why?

    When I try to update Elements 9 I get an error message despite the fact that the update seems to download completely. Why?

    Windows 7. Thanks, but why then do I get a downloading frame that seems
    to indicate that it IS updating?
    Mila and Bill
    On 2014-12-12 14:44, Barbara B. wrote:
    WHEN I TRY TO UPDATE ELEMENTS 9, I GET AN ERROR MESSAGE EVEN THOUGH IT APPEARS TO DOWNLOAD THE UPDATE COMPLETELY. WHY?
    created by Barbara B.  in Photoshop Elements - View the full discussion

  • TS4550 6.1.3 is already out.  Will this be changed in a point-release update to 6.1?

    6.1.3 is already out.  Will this be changed in a point-release update to 6.1?
    My question is related to this KB article: http://support.apple.com/kb/TS4550?viewlocale=en_US&locale=en_US

    nobody here would know. you'll hvae to wait and find out.

  • HT201365 I updated my software Wide. The update completed but when I wanted to open the device access code is required, I typed in the code can be wrong then the device is locked . at pelefon .said the solution is to delete everything on the

    I updated my softwarew in my iphone. The update completed but when I wanted to open the device, access code is required, I typed . the code, it can be wrong i try again but then the device is locked. at pelephone corporetion  said the solution is to delete everything on the device and
    . Reinstall the software
    . Is there no other solution' may be i can cancel  the code

    You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device.  If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match. 
    Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases.  Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy.

  • 8.0.2 update completely wiped 5c

    iOS 8 was working okay but 8.0.2 update completely reset my 5c. Did the update and when it rebooted it just said plug in to iTunes. Not only was phone completely wiped, iCloud backup was cleaned out too. Lost everything. Has anyone else run in to this?

    I did that update last night and it was working during the day. Now it is frozen on the contacts page and nothing works, not even the shut down button.  I wish I had listened to others and not done the update at all.  Sorry I wasn't any help to you as I don't know what to do. I guess I will have to visit a store. 

  • Points Not Updated

    HI,
        Every day the contest points gets updated under BPM category, but today the points are not yet updated.
    Thanks & Regards
    PavanChand

    >
    Florin Wach wrote:
    > h1. Now I understand!
    >
    > why we get so many low-profiled posts that sometimes even may appear as beeing free from any skill .. just for the sake of posting in that particular Forum.
    >
    > I wish there'd never be a top-30-/-50-/... list of contributors (or even point systems), at least I hope there'll never be that kind of game anymore.
    >
    > Your's
    > Florin
    I support point system, as it gauges individual contribution.
    Top 3 for a year is good enough as you need to be consistent (making sure you are up to the mark or skilled to dodge moderator/mentors , both not easy ).
    And quality of forums is affected not because of this yearly contest instead its the Top 3 for last thirty days at the top of forums.It has its own pros and cons ofcourse.

  • 5s phone says IOS8 "Update completed", but when I continue through options it loops back again???

    5s phone says IOS8 "Update completed", but when I continue through options it loops back again. How do I get past the loop and make the phone work?

    Hi saz3011,
    Welcome to the Apple Support Communities!
    I understand it can be frustrating and concerning when your iPhone will not startup as you would expect. I know that you have tried restarting the iPhone as well and the issue continues. There are a few more troubleshooting steps that I would recommend in this situation. Please use the attached article as a resource for troubleshooting. 
    iOS: Not responding or does not turn on
    Have a great day,
    Joe

  • Jelly Bean update completely killed true hands free voice dialing.

    Regardless of the fact that S-Voice (as well as Google Voice dialing/search) is unable to recognize most of my contacts, it's also a fact that by definition, it cannot work as a true hands free voice dialer, which is defined as the ability to make a call without touching (or even seeing) the phone AT ALL.  This is due to the simple fact that neither S-Voice nor Google Voice dial/search allows you to say "yes" or "no" to a phone number confirmation prompt.  In other words, you need to see the screen at some point in order select the correct number to dial.  Prior to the Jelly Bean update, this issue was relatively easily solved by using a third party app -- I preferred an app called "Cyberon Voice Commander" -- to take over the voice dialing duties.  The first time you hit the Bluetooth button after installing the app, you could select the default program to respond to the BT button.  I simply selected the Cyberon Voice Commander app, and everything worked from this point forward -- I could dial a number without ever taking the phone out of it's case.
    With the Jelly Bean update, however, this is suddenly no longer possible because S-Voice completely takes over the Bluetooth button, and does not allow another app to take over as the default.  The "launch by default" section for S-Voice in the application manager is now greyed out, and says "no defaults set" for S-Voice even though S-Voice is set as the default program to launch when pressing the BT button.  The only "potential" solution is to completey "disable" S-Voice via the application manager, which does allow you to select Cyberon Voice Commander as the default BT button press app, but there are two problems with this.  First, the default resets when turning the phone on even though you select "always" for the CVC app.  This means that you have to re-select the third party app as the default BT button app EVERY time the phone is turned off.  Second, disabling S-Voice is not a solution because I still would like to use it for things OTHER than voice dialing.  Disabling it completely removes it from the menu, making it unusable even for things that it is better at.
    I cannot believe how hard S-Voice is being shoved down our throats.  Why would they make it mandatory?  The whole point of Android is that it's supposed to be "open" and allow users to individually decide on their own way of doing things -- i.e. to offer multiple approaches that suit your preferences rather than adopting a narrow minded "we decide what's best" attitude.  This is the whole reason that I moved away from Apple.  This S-Voice situation, however, is just ridiculous.  It's fine to push it as an "option," but please keep it OPTIONAL -- particularly given that it literally CAN'T do what other apps do (i.e. true hands free dialing.)
    Larry

    A few things you can try ... turn off the phone, remove the SIM card, wait a few minutes, then reinsert the SIM card and re-boot the phone.  Maybe a fresh connection to the network will improve the signal/call quality.
    Do a system cache clear; it won't delete your data:
    Power down phone
    Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
    Use volume down to navigate to 'Recovery', use volume up to select
    You should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously to go into system recovery
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select
    If all else fails, back everything up, remove the SD card to be on the safe side, and factory reset the phone.  No, it's not a preferred option, but sometimes that is what it takes to 'clear out the cobwebs' after an operating system update.

  • Itunes says "update complete" but "do not disconnect" never goes away!

    So, I wait and wait and "do not disconnect" on my ipod never goes away.
    A little history:
    I got my nano a few weeks ago, put a few songs on - everything worked fine. Then, I got a new computer. Since I only put a few songs on, I didnt mind starting from scratch. Now, I can't seem to get it to work!? I have songs in itunes. when i click on my ipod, it shows that i have songs on the ipod, it SAYS the update is complete, my ipod shows "do not disconnect" i wait for ages, and then finally just eject the ipod, and - NO SONGS are on it.
    help please. thanks
      Windows XP Pro  

    Do not disconnect always on, this happens when you have "enable disk use" ticked in the iPod preferences, in which case you have to manually eject your iPod.
    However if you are automatically updating your iPod and do not intend using it as a portable hard drive, you can set your iPod to automatically disconnect.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135

Maybe you are looking for

  • Generating images on the fly to use as backgrounds for components

    I am creating an application that has an input number slider with a background image. I would like to change the background image on the slider based on its position (as chosen by the user) using a partial trigger. I have successfully been able to do

  • [JS CS3] Frontmost document/selection when other with same name?

    I have a few scripts used to perform various operations on the current selection in InDesign. Under normal circumstances these work fine, but I can't seem to reliably get the frontmost document/selection when there is another document open with the s

  • Loading multiple SWFs across many pages in a Flash interface

    I have a Flash AS3 interface that lets users go tto different pages with the usualy back & next buttons. Each page they come to loads in a page-specific XML file with content, and then possibly graphic files and/or SWF files. My question is this: Whe

  • How do I find the total number of elements in a multi dim array

    How do I find the total number of elements in a single or multi dim array? For example, a 2x3 array has 6 elements, and a 2x3x4 has 24. How do I compute this very easily - is there a single VI that does this? David Solved! Go to Solution.

  • Installation Quits

    While installing the oracle 10g Release 2 from universal installer on windows XP professional. When I am on clone database stage, which is almost the end of installation. The system just shuts down. It gives a blue screen. Which says the error might