In idoc to file scenario, if XI system is down where do idocs pile up?
In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?
Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS
Similar Messages
-
Why we dont need sender agreement and comm channel in IDOC to file scenario
Hi,
there are 2 queries:
first query :
Scenario is "Idoc to file transfer"
why we dont need sender agreement and communication channel for IDOC to file ,while we do need
both of these for "File to RFC "
Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
Then why For "IDOC to file" we dont need that.
Second query:
Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
and getting data from RFC back to File2.
Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
Regards,
Mayank
Edited by: mayank verdia on Jan 13, 2009 11:49 AM
Edited by: mayank verdia on Jan 13, 2009 11:50 AMDear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks. -
Idoc to file scenario which involves accessing a persistant counter value
Hi,
Presently Iam dealing with an idoc to file scenario in which I need to map the idoc info and also a persistant counter value to a flat file. So in how many ways can we maintain a persistant counter value(either by variable/file/database)? Please can any one help me in overcoming this scenario by providing any implemented example.Hi,
Please see the following links , you can use database is best.
/people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
/people/michal.krawczyk2/blog/2005/09/15/xi-rfc-mapping-lookups-from-bc-to-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/alexander.schuchman/blog/2005/09/29/ipc-customization--add-additional-subtotals-and-include-rebate-conditions
Regards
Chilla.. -
hi experts,
i am getting error while doing RFc connections(R/3 side) in idoc to file scenario, timed out error (cpi_c),
could anybody solve this problem?Hi friends,
here is new document for IDOC TO FILE scenario..
http://jskcomput.blogspot.com/2013/08/idoc-to-file-scenario.html -
Hi,
Can anybody share the document of IDOC to File Scenario for Vendor Master.
Regards,
BalajiHi Balaji Permi ,
Check these websites which wil answer u'r question:
A Step-by-Step Guide on IDoc-to-File Using Business Service in the XI Integration Directory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Introduction to IDoc-XI-File scenario and complete walk through for starters.
IDOCs (Multiple Types) Collection in BPM
IDOCs (Multiple Types) Collection in BPM
cheers!
gyanaraj
<removed by moderator>
Edited by: Mike Pokraka on Aug 12, 2008 3:07 PM -
Pls send me Idoc to file scenario in XI
thanks& regards
Gangahi,
IDOC - File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
configuring IDOCS
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOC scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Idoc related setting
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Regards,
Ramesh P -
Can i get IDOC to File scenario Step-by-Step Procedure?
can i get IDOC to File scenario Step-by-Step Procedure?
please provide me the step-by-step and hole procedure..please.
TksHi,
Check this blog-
IDOC - File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
configuring IDOCS
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOC scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Idoc related setting
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Save Idoc to file
https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
see the below links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Also
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
regards
Aashish Sinha
PS : reward points if helpful -
Integration server as logical system in IDoc to file scenario
Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra. -
Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID
in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName; -
Error/Doubts in Idoc-XI-File scenario
Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.JainHi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps . -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
Hi Experts,
In IDOC to file scenario i did in this way.
1)created logical system.
2)Using SALE tcode I assign logical system to client ,created RFC destination,Port and Partner's profile.
It is showing all the thing correct.
3) In XI system , I configured using IDX1 and IDX2.
Then I created the material and checked the status which is green in we05.
But in tcode IDX5, the material is not coming.
Here I am confused that why data is not coming to XI system.
can anyone help me?
Thanks
RabiHi,
The Following are the Possible checks
1) Check in R/3 side SMQ1 & SMQ2
2) Check in R/3 side SM58
In R/3 system, Goto SM58 tcode and see if the IDOC have stuck up in Queue.
If the entry is available then select it and press F6, to push it manually.
This happens normally if IDOC stuck up in queues.
3) Check in PI SMQ2 and IDX5
regards,
ganesh. -
PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario
Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of. -
Error in IDoc to file scenario
Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi -
ALEAUD in IDOC to File Scenario
Hi,
I have a IDOC to file scenario in which im sending the PAYEXT IDOC from SAP to a bank as the IDOC-XML.
ie the user will create a payment in the SAP system , this shoud trigger an IDOC to XI. XI puts the IDOC-XML sturcture into a FTP folder path from which the bank will pick it up. Now the bank has to send an acknowledgement(asynchronously) that the payment was processed. And this response should be captured and returned to the user.
can we use ALEAUD as the acknowledgement or does using ALEAUD make no sense here?Hi,
Assuming that the bank will send you a file to the FTP server you can simply pick up this file and mapi it to the Systat IDoc. I would assumt that the IDoc status's would not be in the file so you would have to do some value mapping or other logic to determine the IDoc status codes that you want.
The IDoc is very simple with few fields so the mapping should not be a problem.
Please note you do not use BPM for this scenario. In essence this would be a new flow of File --> PI --> IDoc
Import the STATUS.SYSTAT IDoc into the Design and play from there, you can make a POC now and test the functionality which would probably be best for you at this point.
Let me know if you need more details
Edited by: Alexander Ong on Jul 14, 2009 4:57 PM
Maybe you are looking for
-
Adobe Dreamweaver CS6 cannot be opened because of a problem.
Dreamweaver is crashing for me on launch -- I tried uninstalling, re-downloading and relaunching, but still get the same error. I'm running Mac OSX 10.8.2, the Creative Cloud version of CS6. Any suggestions? The problem report info is below. Process:
-
I downloaded firefox to my pc to sync to my iPad. However, when it downloaded to my iPad, it removed all my desktop icons and is not working with my homeschooling program. I need to uninstall it from my iPad. Please let me know how to do this. Thank
-
Inserting Totals on the Stock in Warehouse report
Hi all I want to knwo what code or formula must I use to total the stock in warehouse report . This report must print each warehouse report on separate papers. Thanks
-
How to use bapi to change so's schedule line category
dear friends: I try to change so's schedule line category using bapi "BAPI_SALESORDER_CHANGE", but it doesn't work,the code is as following: T_SCHEDULE_LINES-ITM_NUMBER = ITAB-POSNR. T_SCHEDULE_LINES-SCHED_TYPE = ITAB-ETTYP. T_SCHEDULE_LINES
-
Hi, I developed a webdynpro iView.But it displaying following error in preview.I established the JCO connection successfully. com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_RFC_METADATA_A