IN IMG, I couldt see details documentations about particular area.

hI
when I m IN IMG, I couldt see details documentations about particular area.
ex. when under Asset accounting goes for valuation and want to see document for valuation? I do click left side document Icon and nothing happen?
could any one guide me how to activate this to view documentation?
thanx in advance
Bobby

Hi Attila,
there are demos available on the SAP Service Marketplace (http://service.sap.com/healthcare-tutorials) that will give you a good impression of the key capabilities of SAP for Healthcare.
If you are particularly interested in the industry-specific solutions SAP Patient Management and SAP Ambulatory Care Management, the documentation is available in the SAP Help Portal (direct link: http://help.sap.com/saphelp_erp2005vp/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm)
Best regards,
Katharina

Similar Messages

Documentation about Content Area APIs and Views

Can somebody point me to the documentation about Content Area APIs and also the documentation about the views of the Content Areas ?
I have not been able to find nothing else that what is available in the package specs.
Thank you for your help.

Hi,
Please Refer to this thread.
Re: eclipse designer not found in Beta 3
--Sriram

Detailed documentation on architecure.

Where Can I get documentation on Rights Management Architecure? I am particularly keen about security keys are handled during RMS workflow.
In AD RMS I can find detailed documentation about various certificates used and flow of various keys during encryption and decryption cycle. Also details
of deployment in clusters.
I want to know where can I get similar kind of documentation on LiveCycle rights management.
Regards,
Sharang

Sharang
I'm not sure if this document ( http://help.adobe.com/en_US/livecycle/9.0/services.pdf ) is detailed enough (see page 42), but it does have some info regarding how documents are secured with Rights Management.
Regards
Steve

Detailed Documentation on APIs in Oracle HRMS

Hi,
I'm interfacing data into Oracle HRMS. Once the data from the flat files is put into the Intermedeate tables, the API and Data pump need to be run.
Could anybody tell me where I could find detailed documentation about
1)the HRMS API's,
2)the Data pump and
3)which API handles which table's data?
please put the link in this post or mail it into this account:
[email protected]
Thanks in Advance
KP

You can refer metalink site and use eTRM site for best information on APIs
giridharan d
[email protected]

Detailed Documentation for Interactive Forms

Hi,
I need a detailed documentation about Interactive Forms and how to use the transaction sfp
Thanks.
Regards,
Muhammad

Hi,
Did you check the Home page for Adobe products :
https://www.sdn.sap.com/irj/sdn/adobe
In particular, I would go to the SAP Help :
http://help.sap.com/saphelp_nw04s/helpdata/en/cc/05c27f53ad430688f8a95f1c0c79db/frameset.htm
Best regards,
Guillaume

Mobile sales 5.0 documentation about BP group hierarchy

Hi,
I´m searching detailed documentation about mobile sale 5.0. I have already seen the help on line, but it is not containing any details on configurations steps neither on how some functionality is working.
In particular I´d need to understand how the BP hierarchies are working in msa and if it is possible to distribute the nodes of the hierarchy depending on the BP on the laptop and not bulk. I´ve found tree replication obj: CAPGROUP_WRITE, GRPHIER_WRITE, GRPTREE_WRITE. In CRM 4.0, if I remember well, there were only the CAPGROUP_WRITE; so I cannot understand what are the differences between all of them and when they should be used.
Does anybody have any documentation? Or know how they are working?
Any input will be really appreciated.
BR
Camilla

Hi,
This link might contain the info. you are looking for:
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/BD/F7A942AD920C31E10000000A1550B0/content.htm
Note: After you get to the page, click on the little 'synchronization' link (red right/left arrow). The overall help structure that contains this topic as well as other related configuration information appears.
Thanks,
- Kumar

Documentation about net.inet.ip.scopedroute

Hi,
Where could I find detailed documentation about the following kernel parameter:
net.inet.ip.scopedroute
Thanks for any pointer.
Regards.

After a few tests, I think this parameter is related to the "multiple default gateway handling" feature of 10.6.
Thanks for the answer.

Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

Where can I find the detail document about certain method of a class?????

Moved to correct forum by moderator
Hi everyone,
where can I find the detail document about certain method of a class?????
e.g. the class CL_GUI_ALV_GRID , when I was going through the class and looking
at the methods, sometimes the method description is just like the method name,
and I cannot know what the method does.
so, I am wondering where I can find the detail information about the class???
Edited by: Matt on Dec 4, 2008 11:55 AM

Hi,
Most of the times the SAP itself provides the documentaion of the CLASS. when you click on the METHOD name the METHOD DOCUMENTATION button you can see on the application tool bar.
more over the names of the methods suggest what it is going to do.
SET_ATTRIBUTE( sets the attribute)
GET_ATTRIBUTE( gets the attribute value that is provided to the method)
GET_CHILDNODE
BIND_TABLE
etc
like this
regards
Ramchander Rao.K

Detail questions about indexes?

We are trying to reduce coherence index heap use in our application using partitioned cache (we use near but it is the partitioned back tier that holds the indexes) and therefore needs to better understandand some details (we are right now using version 3.6 but will eventually change to 3.7 so if any of the answer are different for the two please indivcate that):
1. Are any indexes (or some part of them) maintained per partition (would be my guess since it is possible to efficiently apply PartitionFilter) or are they all per node?
2. Are any part of the indexes in binary form or are both the keys and values in the form of "java objects"?
Best Regards
Magnus

MagnusE wrote:
Thanks for the info.
I got a bit confused about your description of the forward and reverse indexes - I would have assumed that what is referred to as "forward index" would map keys to values provided by the extractor and the "reverse index" map values returned by extractors to possibly multiple keys that have extractors returning this value but it seems like it is the other way around or?!
Hi Magnus,
what you wrote first is correct.
The forward index is a map of internal (binary) keys to extracted values. This has the could be stored in the backing map entry, but I don't think it is done as that would make plugging in index implementation with IndexAwareExtractor much more problematic. Too bad, as it would have been a nice optimization.
The reverse index is a map of extracted values as keys to values of a collection or array (logically a set) of internal (binary) keys of entries the extracted value was extracted from.
So if you have a NamedCache<K,V> and extracted value type is X, then forward index is Map<Binary<K>,X> and reverse index is a Map<X,Set<Binary<K>>> for unsorted indexes and SortedMap<X,Set<Binary<K>>> in case of sorted indexes.
The map and set implementations may differ from implementation version to implementation version.
I don't know what you refer to which would describe it the other way round.
In our case the indexes seem to occupy a lot more heap than the data itself(!!!). That is quite conceivable if you have attributes which can take lots of different values, as in that case the reverse index will also have many entries, each entry value being a set which is not exactly a lean thing either.
It is in particular an index containing information about what cache objects that reference what other cache objects (we use this to answer "where used" questions i.e. what objects contains references to object X) that seem to occupy LOTS of space...
Again, that is lots of different values thus lots of entries in reverse index.
Do you think that your analysis can be easily extended to extractors returning a collection (as is the case for our "gigantic" index) or do they require more investigation?A collection is just a value. If two collections do not equal by the equals() method, then they will have different reverse index entries. It is quite feasible to implement a forward-only index in case you don't need to filter for equality, but you just want to avoid deserialization.
>
With 3.6.1.4 we have done some preliminary tests with different number of partitions and it seems (not fully verified) that it makes a significant difference (fewer partitions = lower index size) so maybe they something has changed from 3.5 (with your analysis I do not see any indication that number of partitions should affect index size or have I missed something to that effect)...
Number of partitions do not affect index size at the moment, indexes are not partitioned in 3.6. (Probably not even in 3.7). The only case when they would influence index size would be if you had partitioned reverse index (and that would make reverse index footprint possibly worse, but definitely not better) analogously to having more nodes causes higher total index footprint.
It is a pity that Oracle don't provide this kind of technical information in the documentation - for a this kind of product it is often essential for developers / architects to have as detailed info as possible...
I don't see what documentation you are really missing. Coherence indexes are instances of SimpleMapIndex which class has a Javadoc. Alexey and I have several times described the structure of indexes on the forum and in the blog. The Coherence book quite aptly describes it. All those descriptions are still valid as index strutures have not significantly changed since 3.0 except that starting with 3.6 you can plug in your own implementation of MapIndex instead of SimpleMapIndex. There was an optimization around 3.5-3.6 time (as far as I remember in one of the 3.5.x patch releases and 3.6) which ensured that you don't have multiple references to the equaling extracted objects (after a request Alexey submitted after one of his blog entries describing index usage), but really that is all, and even that was not a structural change. Semantically, having sparse indexes and forward-only indexes became possible with 3.6 (by plugging in your own implementation), and I don't remember which version introduced not indexing null values which cuts down on size a bit if nulls are frequent and not interesting.
Best regards,
Robert

Is there any Documentation about MDM4J (Java API) ?

Hello to all,
I was wondering... Is there any possibility to get documentation about the classes in the MDM4J.jar ?
We can not use the other Java Api, and we need to understand this one.
Thanks in advance,
Mariano.-

Dee Bishnu wrote:
You're looking for documentation in addition to the javadoc included with MDM4J, right?.-
Exactly, but, I don't have the javadoc that are included with MDM4J. Are the javadocs always shipped with the MDM4J.jar?
RDNPrasad wrote:
Hi Mariano,
all the documentation is available via the MDM documentation center on SAP Service Marketplace:
http://service.sap.com/installMDM
Yes, but in that adress you only see the last documentation, and I want an old documentation that isn't found there.
Nico Razlow wrote:
hier is the link to the Java API SP3 (mdm4j):
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700007403222005E
Thanks !! That PDF was really helpful !!!
Sudheendra Puth wrote:
To work on java api using MDM4J use the below link on javadoc
http://help.sap.com/javadocs/MDM/SP06P2/index.html
Kindly award points if it was helpful
That adress is the documentation for the "New Java API", not the MDM4J.
I'm going to put the question as answered because the PDF that Nico provided is like a javadoc. If anyone has any more information, please contact me privately.
Thanks to all for the Answers !!!
Mariano.-

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

Detailed analysis about the dimension tables of a cube

Hi Experts,
how can I get a detailed analysis about the dimension tables of a cube? (E.g. how many records include the fact tables, dimension tables and how much percent are these records compared with the whole records of the cube?!)
Thx in advance for your answers!

Hi,
You will get most of the information in LISTSCHEMA transaction code. If you want to see further you can see the records in SE11.
Regards
Githen

Documentation about CRM_ORDER_MAINTAIN

Hi All
iam searching bapis about <b>Maintain activity</b>.
i found one bapi like <b>CRM_ORDER_MAINTAIN</b>
but i didn't get any functional documentation about that bapi.
if any one know about that bapi please give me response.....
Thanks and regards
Sumalatha...

Hi,
CRM_ORDER_MAINTAIN is used for modifying contract.
IMPORTING
> this gives list of values which is to be modified.
        u have to pass values to modified and key for
        that particular internal table
CHANGING
> specify values to modified
      1) CT_INPUT_FIELDS ...this gives the list of field which is to be modified
         so u have to specify internal table ,field name and selection key.
      2)CT_ORDERADM_H......this for header of the contract.
       u specify header detail along with modification.
      3) CT_ORDERADM_I........same applies for line item
      4) CV_LOG_HANDLE........Application error log
CRM_ORDER_MAINTAIN

Detailed Documentation on Multi-providers

Hi,
Does anyone know where to fnd detailed documentation on Multi-providers ?
If no documentation available, can anyone recommend a book that explains how multi-providers behave in different design situations ?
Cheers

Hi Achin,
here is your document:
www.service.sap.com/bw->SAP BW InfoIndex->MultiProviders->MultiProviders (incl. Slow Moving Item Scenario) 3.0B SP07 (Docu Enhancement) (pdf)
following this link you can find also info about Multi-Cubes and Partitioning
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700008401002000E
If you want some more info give me your e-mail address (cause I'm not finding these docs on line with a path..)
Hope it helps (and please don't forget to assign some points by clickin'on the star to the contributors that helped you !!!)
Bye,
Roberto

IN IMG, I couldt see details documentations about particular area.

Similar Messages

Maybe you are looking for