In iMovie '08, how do I display the timestamp on my video?

I have a MacBook from June 2008 with iMovie '08 7.1.4 and I need to be able to create movies and display the date and timestamp on the movies - the way it shows on my camera when I'm recording or viewing clips. I've read every thread and forum I can find and still nothing. Suggestions? I read one post that said to use the date/time title, but when I open the titles box, it simply isn't there.
Also, when I import my video, and view the playhead info (just the little floating info, it doesn't show on the movie itself) everything is 8 hours off. This only happens on my mac, when I import on other computers, it reflects the actual time that shows on my camera. I changed my macbook from pacific time to london time and then imported and the playhead info looked correct; however, this seems like compensating for the issue, not correcting it. Suggestions?
Thanks everyone!

HSThompson
3rd party software is the only way I know to apply date/time stamp to your Timeline video.
See DVDate plug-in. I have not tested it for Premiere Elements 13 yet but it has worked successfully for versions of Premiere Elements earlier than 13.
http://dvdate.ru/
If you decide to give it a try, I can give you step by step information if needed.
ATR

Similar Messages

  • How do I display the complete time sequence for a video clip in iMovie?

    How do I display the time complete time sequence for a video clip in iMovie?
    I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted.  For example:  Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip.  I know you can select video but I cannot figure out how to select from those requested time markers.
    Any help would be apreciated.

    Open the file using QuickTime Player and then open the Movie Inspector window.

  • How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
    The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
    If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

  • How can I display the data in table in separate column?

    I have a vi reading data one by one in the same column.
    How can I display the data with separate column?
    like this:
    data 1 | read | read
    data 2 | read | read
    data 3 | read | read
    (would you mind if I will ask for an example
    because it is much easier for me to work
    with an example)
    THANK YOU.

    If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
    Attachments:
    Data_Column_Example.vi ‏18 KB

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I display the range for LastFullMonth in the header of a report

    How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009)  displays sept 2009 in the header even if there is no data selected by the report?

    Good,
    Sometimes I answer these questions and completly miss it....
    ( lack of understanding on my part )   

  • How can I display the HTML page from servlet which is called by an applet

    How can I display the HTML page from servlet which is called by an
    applet using the doPost method. If I print the response i can able to see the html document. How I can display it in the browser.
    I am calling my struts action class from the applet. I want to show the response in the same browser.
    Code samples will be appreciated.

    hi
    I got one way for this .
    call a javascript in showDocument() to submit the form

  • How can i display the message

    public class Userdefined extends Exception {
              Userdefined(String sparam){
              System.out.println(sparam);
              Userdefined(){
         private static int acno[]={100,105};
         private static double bal[]={100.00,200.00};
         public static void main(String args[]) {
              try{
              for(int i=0;i<2;i++)
                   System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
                   if(bal[i]<150.00)
              Userdefined udexp=new Userdefined("bal less");
              throw udexp;
              catch(Userdefined e){
                   System.out.println("--->"+e);
    How can i display the message "less amt" using my parmeterized constructor.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    VinayTK wrote:
    How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
    A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
    Winston
    BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
    Edited by: YoungWinston on Sep 1, 2009 9:46 AM

  • How can i display the error count

    Hi I'm using jdev11g
    How can i display the count of errors in validation error message pop up instead of displaying the entire list.

    Searching the forum would help
    Re: How to customize Error?

  • How can I display the vendor associated with result of my running total sum

    I have a report that lists vendors with their most vecent order dates.  I need to set up a rotation so that the vendor with the latest order date is next to be selected.  I used the running total summary to pick the latest date.  How can I display the vendor associated with result of my running total summary?

    If your "latest" order date means the "oldest" order date, why don't you try this:
    Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
    This will make your oldest order your first record shown. 
    You can then create a running total count for each record.
    Lastly, in your section expert under conditional suppress X+2 formula, write this:
    {#CountRecords}>1
    The result will only show the oldest record in your report.
    I hope that helps,
    Zack H.

  • How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?

    How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?
    I made a sellection of video clips  > pressed on "share" > on iDVD >  after one hour of formating the message was under "project duration"  : "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window."
    I have edited out some of the clips and waited anothe hour or so bu the same message appeared !
    I want to know in advance how long can be the video clip sellection for the quality of video chosen ( the best before HD).
    please help if ou can.
    thank you very much indeed.
    Michael
    North London

    It's trying to tell you to change the encoding setting:
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • How can we display the list of Report Names in Dashboard Prompt?

    How can we display the list of Report Names in Dashboard Prompt?

    Hi,
    No its not possible to display list of reports in dashboard prompts.
    Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
    Assign points and close your threads if answered.
    Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
    Regards,
    Srikanth

  • How can  i  display the Number  instead of  E

    Hello Everyone ;
    I am getting confused. How can i display the Number but the Exponential value is coming as E.
    SQL> select sum(amount_sold) from sales;
    SUM(AMOUNT_SOLD)
    1.1287E+11
    Table details ..
    SQL> desc sales
    Name                                          Null?        Type
    AMOUNT_SOLD NUMBER
    i want to change 1.1287E+11 to "numeric"
    DB : 10.2.0.4
    os : rhel 5.1

    Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
    MPOWEL01> l
      1  select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
      2* from sys.dual
    MPOWEL01> col TEST format 999999999999
    MPOWEL01> /
    LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+          TEST
                             12  112,870,000,000  112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
    HTH -- Mark D Powell --

  • How can i display the days of the month in my report, please help

    dear all
    my table name is day_close_table
    it contains these columns:
    product_code number,
    the_date date,
    sale_qty number,
    buy_qty number
    price number
    i need to make report like the fiollowing
    product : 10144 from: 1-jan-2006 to :10-jan-2006
    days | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
    Sale | 50| 10| 20| 15|10|5 | 6 | 11|12|6 |
    buy |10 | 20 | 10| 0 | 0 | 0 | 10| 1 | 1| 1|
    i created two query and i decieded to join them
    the first one is to display days in horizon direction
    my query is:
    SELECT TO_CHAR(THE_DATE,'DD-MONTH')D,
    FROM HS_DAY_CLOSE;
    my question is how can i display the records in horizone direction
    please help

    i solved this problem using this query
    SELECT STOCK_CODE, COUNTRY_ID,
    SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
    SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
    SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
    SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
    SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
    SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
    SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
    SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
    SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
    SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
    SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
    SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
    SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
    SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
    SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
    SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
    SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
    SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
    SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
    SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
    SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
    SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
    SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
    SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
    SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
    SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
    SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
    SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
    SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
    SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
    SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
    FROM HS_DAY_CLOSE
    GROUP BY STOCK_CODE,COUNTRY_ID

  • How can i display the login details in the Web Ui

    Hi All,
              How can i display the information regarding the person who logged into the Web Ui and where can i find the seetings regardin this.Please provide your valuable suggestions
    Regrads,
    Lakshman.P

    look at this link https://wiki.sdn.sap.com/wiki/display/CRM/WelcomeUserMessageinWeb+UI and you will solve your problem.
    have a nice day.

Maybe you are looking for