In iMovie: I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?

in iMovie:
I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
please help.
J. Aalbers

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

Similar Messages

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

Hello MichaMuc,
I found some steps to help resolve the "Activation: failed" error messsage you are getting on your Apple TV:
Restart your base station or router. Sometimes this is done by turning the router off for a few seconds, and then on again, but check the documentation provided by the manufacturer.
To restart your Apple TV, press and hold Menu and Menu down/scroll ( - ) for about 6 seconds and then choose Restart from the menu.
If the issue continues after restarting, reset your router or base station and Apple TV to factory settings
Reset your base station or router. Use the documentation provided by the manufacturer to reset to factory settings.
To reset your Apple TV perform a factory restore.
You can find the full article here:
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/ht1595
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, the icons don't wiggle anymore.

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, when I double-click the start button, my open app icons display. But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close. Any advice... thanks?!

Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

I HAVE TO INSTAL A PRODUCT C LLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

I HAVE TO INSTALL A PRODUCT CALLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

if you try to install an app that depends on adobe air, you should be prompted to download and install adobe air (unless it's already installed).
you can download and install directly so you're not prompted by that app, Adobe - Adobe AIR

TS1717 Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

Please carefully read and also book mark:
Time Machine Troubleshooting
Time Machine FAQs

I have dowloaded the newest version of IOS 7.1.1 today and i forgot the initial apple ID that was used to setup my phone, how can i solve the problem?

i have dowloaded the newest version of IOS 7.1.1 today and i forgot the initial apple ID that was used to setup my phone, how can i solve the problem?

Hi Ghassan8727,
If you have forgotten the password to the Apple ID that was used to set up your iPhone, you may find the following article helpful:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden

TS3276 Help!! I'm a fairly new MAC user. My Email has frozen on the computer. I cannot close Email to do a reboot. what have I done wrong and how do I correct the problem. My server is obviously working. thanks, Sharon

My Email has frozen. I'm unable to close Email so I'm unable to reboot the computer. I'm a fairly new Mac user. What have I done wrong? And how do I resolve the issue? thanks, Sharon

Force quit. cmd-option-esc key combo. Then choose Mail and force quit in the window that presents itself.

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card and it has been reset but for some reason it will not pick up my wireless network, or any other wireless network. What is the problem?

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?

Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim

My iTunes program has broken letters, How can I solve the problem?

I bought a new MacBook few days ago.
I set up my MacBook and then set up ipod.
On the first day, it had no problem.
But on the next day, when I launched iTunes, all the letters were not english font, but they were Hebrew and other broken fonts.
How can I solve this serious problem?

Welcome to the Apple forums, Samuel.
How can I solve this serious problem?
Very simply.
You have installed an application which has placed its own copy of the font "Lucida Grande" on the hard disk. This copy of Lucida Grande is causing a conflict with the Mac OS X version - Lucida Grande is provided and used by the Mac OS to display text in menu bars and on buttons.
Open "Font Book" and locate the entry for Lucida Grande. You will see a black dot next to the name - this indicates that the font is duplicated.
Click the triangle to show all instances of the font.
Click on "Preview" in the menu bar and choose "Show Font Info" from the drop down.
Click on one of the instances of Lucida Grande.
In the info window, look at the entry for "Location". If it does NOT say System/Library/Fonts/Lucida Grande delete it.
Do not, under any circumstances delete the font if the location shows up as:
/System/Library/Fonts/Lucida Grande This is the Mac OS X system version.
Message was edited by: Nick Holmes
Message was edited by: Nick Holmes

IPhoto 11 9.3 I click on a thumbnail and the screen is black or has a triangle with exclamation mark inside of it

iPhoto 11 9.13 I click on a thumbnail and the screen is black or has a triangle with an exclamation point

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

In iMovie: I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?

Similar Messages

Maybe you are looking for