In InCopy, how can I paste from one InDesign table to another without also copying formatting?

I'm attempting to paste information from one indesign document to another, but the styles are different. Pasting without formatting not working in a table. When I paste over, it retains the container style from the original table.
I have "Text Only" selected from my Clipboard Handling preferences, so I'm not sure what else to do. I know I can hit escape to switch to the text selection instead of a container, but this only selects the text from one cell. I'd like to copy over the entire table, instead of copying cell by cell.
How can I paste a table into another, without copying the formatting?

Copy/Paste whole cells will always retain formatting.
What you have to do is: Copy/Paste Without Formatting the text contents of the individual cell.
You have to do that individually for each cell, if you want to copy over text of a whole table.
A better approach would be to:
1. Copy the whole table to Excel (or a different spread sheet application)
2. Copy again from that
3. Select one single cell and paste
In that case "Text Only" should be selected from the Clipboard Handling Preferences.
Uwe

Similar Messages

HT201320 How can I switch from one email user to another?

How can I switch from one email account to another?

You have to select between the two accounts in the mail app.
Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
Is that what you want to know? There is no way to simply "toggle" between the two accounts.

How to scan data from one internal table to another

Hi All,
let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

if u want to copy data from itab1 to itab2 then use
itab2[] = itab1[].
if u want to compare whether both itab1 and itab2 are same or not,use
if itab1[] = itab2[].
*--same
else.
*--not same
endif.
if u want to compare itabs based on primary key....
loop at itab1.
read table itab2 with key f1 = itab1-f1.
if sy-subrc <> 0.
*--not same....
endif.
endloop.
if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
append lines of itab1 from 1 to 3 to itab2.
if internal tables don't have same structure,
say only fields f1 and f2 are common,then
loop at itab1.
itab2-f1 = itab1-f1.
itab2-f2 = itab1-f2.
append itab2.
clear itab2.
endloop.
if there are many common fields then...
loop at itab1.
move-corresponding itab1 to itab2.
append itab2.
clear itab2.
endloop.
Please don't forget to reward points....!!!
Regards
vasu

HOW TO TRANSFER DATA FROM ONE INTERNAL TABLE TO ANOTHER

FOR PERTICULAR OBJECT ID ONE INT TABLE JTAB CONTAINS ONE RECORD(ROW) AND ANOTHER INT TABLE KTAB CONTAINS 3 RECORDS(ROWS). THEN HOW I SHOULD TRANSFER DATA FROM KTAB TO JTAB? WHAT R THE VARIOUS WAYS TO DO THAT. PLS HELP ME OUT. THANKS IN ADVANCE

Try something like
If you want one record per ktab :
LOOP AT jtab.
MOVE-CORRESPONDING jtab TO itab.
LOOP AT ktab WHERE id = jtab-id.
    MOVE-CORRESPONDING ktab TO itab.
    APPEND itab.
ENDLOOP.
ENDLOOP.
or
LOOP AT ktab.
READ TABLE jtab WITH KEY id = ktab-id. " binary implicit if sorted type
MOVE-CORRESPONDING jtab TO itab.
MOVE-CORRESPONDING ktab TO itab.
APPEND itab.
ENDLOOP.
If you want to sum ktab ratio into itab for each jtab
LOOP AT jtab.
MOVE-CORRESPONDING jtab TO itab.
LOOP AT ktab WHERE id = jtab-id.
    ADD-CORRESPONDING ktab TO itab.
    APPEND itab.
ENDLOOP.
ENDLOOP.
Use sorted type table when LOOP AT WHERE, else SORT table is enough.
Regards

How can I link from one flash document to another with buttons?

Hi,
From the question above, you can tell that I'm very new to flash, especially with scripting. Total noob.
I watched my instructor's videos and I'm still stumped. He didn't explain it very well.
For starters, I am using Flash CS6, but I clicked on AS1.0 and AS2.0 from the drop down mention in the actionscript window for the script below, since that is what my instructor used.
What I have now are various pages I've already created in flash that are different pages in my website, including a splash page with an enter button.
For example, I want the enter button to link to another .swf or .html file when it is clicked. This file will be the main page.
I tried using this script that my instructor mentioned in the video on the button layer:
on (release); {
getURL("page1.swf");
the "page1.swf" file is already in the same folder in my computer as my splash page and I even imported it to the library of my splash page.
From my instructor's video demo, that should be apparently all that is needed.
But I cannot get this to work.
I tested the file and this is what flash comes up with:
In the output tab:
ReferenceError: Error #1065: Variable TCMText is not defined.
In the compiler errors tab:
Scene 1, Layer 'Layer 28', Frame 1, Line 1
1180: Call to a possibly undefined method on.
Scene 1, Layer 'Layer 28', Frame 1, Line 1
1120: Access of undefined property release.
Scene 1, Layer 'Layer 28', Frame 1, Line 2
1180: Call to a possibly undefined method getURL.
Any thoughts? My instructor also recommended that I embed the .swf into an .html, but he obviously didn't tell us how to do that!
Also, why doesn't script assist work with AS3?
Thank you so much!

Okay so I changed it to AS1/AS2.
Now it says this:
Scene=Scene 1, layer=Layer 28, frame=1, Line 1
Mouse events are permitted only for button instances
Scene=Scene 1, layer=Layer 28, frame=1, Line 4
Syntax error.
I am very confused.
Also, since all my other pages are in AS3, is there some way I can use another script in AS3 that accomplishes the same task?
Can someone please provide me with the correct script to use?
Thank you so much! I feel that people here are much more responsive than my instructor is! Thank God for this forum!

How can I move from one hard rive to another to search for my photos?

I have many of my photos on an external hardrive. iPhoto will not let me go to that external hardrive to search. It only shows the photos I have on my laptop. What is an easy way to do this?

Don't know if I would call it "easy" but what you need to do is to create a new iPhoto library on your external drive.
Hold down the option key when starting iPhoto. You will get a dialog that will let you create a new library. (on you external drive)
Now you can add photos to this library as usual.
To switch between libraries hold down the option key when starting iPhoto and select which library you want.
If your still confused you may want to post aditional questions on the iPhoto support section.

How do I move from one external drive to another, without the "Relocate Masters" command?

I have my masters referenced on an external hard drive, and I've been mirroring that drive with another so that I have a backup (the volume names were ApertureLib1 for the primary drive and Photo7 for the backup). I've filled that drive, so it will no longer be my primary master drive (i.e. all new masters going forward are going on a new, separate drive). I want to keep one of the two drives online and put the other away as an offsite backup.
The catch is that the primary drive (ApertureLib1) does not place nicely with my Lexar Firewire 400 CF reader; when I insert or eject a card, it has a habit of disconnecting itself. The backup drive (Photo7) does not exhibit this issue. So I decided that I'd just rename Photo7 to ApertureLib1 and be on my way; the folder containing all the masters (PhotoLib) is mirrored by using Arrsync (an rsync GUI), so all the files should be there.
Great theory, except that Aperture does not recognize the renamed Photo7 drive as ApertureLib1, despite the system seeing it as such (both in the Finder sidebar and showing up in /Volumes as "ApertureLib1"). The "locate referenced masters" dialog shows ApertureLib1 as 'offline' and does not give me any opportunity to point to the second drive as the master location.
I assume that Aperture is somehow tracking a separate unique identifier for the drive. Does anyone know what this might be and how I might convince it to treat the was-a-backup drive as being the One, True Location for this set of masters?
Many thanks.
(and I really don't want to use "relocate masters" because I'd first need to delete the exsiting copy on the second drive and then move over all of the images from the first drive, before copying them back to have a backup)

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

How to move photos from one hard drive to another without losing data?

I have lightroom latest version. I have an in-computer hard drive full of photos. It is clogging the machine and I am running out of storage space. To make room, I would like to transfer most photos to an outboard portable hard drive. How do I do that without losing all the hard earned flags, stars, tweaks, and other data currently stored regarding those moved photos and confirm I can still locate them again when using Lightroom (which will remain on the main hard drve)?

This describes the procedure: Adobe Lightroom - Find moved or missing files and folders

When I copy and paste from one source material to another within adobe reader, all the words are in one sentence. I have to take extra time to separate the words using the space bar. Can this be fix?

When I copy and paste from one source material to another within adobe reader, all the words are in one sentence. I have to take extra time to separate the words using the space bar. Can this be fix?

Hi Bernie,
Are you trying to copy and paste from a pdf to another pdf?
Regards,
Rave

HT4527 how can i transfer my purchases from one windows pc to another without having access to the pc with the music on as it is broken

how do i transfer my purchases from one windows pc to another without having access to the pc with the music on it , as it is broken ?

on new pc - open itunes. sign into your account. go to settings. authorise the pc you are now using. go to account in itunes store. download purchases. simples.

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to insert select columns from one internal table to another

Hi,
How to insert select columns from one internal table to another based on condition as we do from a standart table to internal table.
regards,
Sriram

Hi,
If your question is for copying data from 1 int table to other ;
we can use
APPEND LINES OF it_1 TO it_2.
or if they have different columns then:
loop at it_1 into wa_it1.
move wa_it1-data to wa_it2-d1.
apped wa_it2 to it_2.
clear wa_it2.
endloop.
thnxz

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

In InCopy, how can I paste from one InDesign table to another without also copying formatting?

Similar Messages

Maybe you are looking for