In India will the training of SAP SD module help in starting SAP career?
In India, how can training of SAP SD module help a person in starting his SAP career? Do this training be helpful after a engineering degree in printing technology?
Hi,
Its more helpful when you a functional knowledge , experience and certification in your hand along with training.
try to get an entry job in SAP SD in any company, then improve your knowledge with trainings, certifications etc.
Read the career center blogs written by Gold Otto and others, they are worth Reading.
Must read career advice for all beginners - check out this blog
regards,
Mahesh.
Edited by: maheshchandra.lanco on Dec 17, 2011 12:48 PM (blog link)
Similar Messages
-
I have MacBook Air. with OS X .Where to watch the training videos?
i have MacBook Air. with OS X .Where to watch the training videos?
this should help: https://www.apple.com/support/macbasics/
-
Problem in starting SAP liveCache server
Hi,
I am getting the following error message when i tried to start SAP liveCache server with LC10.
"Restart of liveCache LC3 on saplc3cache terminated; reason: User LC3RFC has lock"
Message no. LVC072
Does anyone has idea! abt the error? why it comes and how it can be solved?
Thanks,
VenkatHi Christiane,
The startup procedure is not even reaching the lcinit script. There are absolutly no logs in knldiag and lcinit.log files. After little bit debugging I found the problem. But don't know how to solve it.
The problem occured when I was doing disrptive testing for the liveCache server.
When I kill ("KILL -9 PID") the liveCache server processes (<b>master first and then child</b>) there are some IPC resources hanging over there. These IPC resources (shared memory segments) holds some locks and are preventing the liveCache server to startup.
The problem is not happening when I kill child first and then master process (all the IPCs are getting removed in this case).
I am wondering whether SAP has any tool to remove these IPC resources for liveCache server uniquely for perticular liveCache server (something similar to cleanipc for SAP systems).
I can't write a script to remove all the IPC resources based on the user name ('sdb') which same for liveCache server and MaxDB. (Imagine a case where MaxDB(APO DB) and liveCache server are running together). Any other solutions?
Any answers/suggestions are most welcome.
Thanks,
Venkat -
Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara -
Financial experience for SAP FICO module
is experience in core finance required for SAP FICO module or experience in financial domain good enough ?
All that you require for SAP FI is the ability to understand the business process in FI terms and implement the same in SAP.
Good domain knowledge is a must for SAP FI consultant - either it be in the form of education or thru' experience.
If you can understand the requirements in FI terminology, you can easily start your career in SAP FI and can value add your knowledge thru' experience.
All the best!
Regards,
Sridevi
Award points, if found useful. -
I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
Waiting for response from the support group members...Thanks Ralph
This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say? -
have just shifted to India where the voltage is 220V vs 110V used in US. will the apple tv work directly or do i need a step down convertor to use it?- tks sahil
You only need a plug adaptor as long as the voltage is between 100 and 240 volts.
(123957) -
When will the new iMac mini be available in India ???
when will the new iMac mini be available in India ???
Contact the local Apple guys. Or keep an eye on the local website.
-
I want to know about wen the iphone 5 launch in india and also what will the price
i want to know about wen the iphone 5 launch in india and also what will the price
Anyone here knows or has access to the same info that you do or can access.
If Apple has a website and online store in India, check Apple's website in India for an announcement. -
I have purchsed iPhone 4S from US. Now my screen is broken and want to get it repaired. What will the cost and time taken in repairing of the same in US.
You cannot get warranty or out of warranty service in India on a US purchased phone. The warranty on the iPhone is not international.
-
Please tell me, when will the ipad mini arrive in india, i'm eagerly waiting for that !
When Apple has a stock of refurbished iPads they will be sold.
There is no set time, date or quantity. -
i have done my b.tech in mechanical and automation. now i am planning to join sap mm module. tell me it will help me to groom my future???
what are the job opportunites as in fresher after doing this course. which is the best insititute for this course??Hi Nishant,
Welcome to SCN.
Questions like these have been asked many times in these forums. I suggest you search for relevant information and if you are not satisfied, then post a specific question.
Also, spend some time reading the The SCN Rules of Engagement
pk -
Will the T Mobile unlocked iPhone 6 be compatible in India?
Will the T Mobile unlocked iPhone 6 be usable in India? Can it be used as it is in Indian GSM networks without any unlocking required? I asked my friend who lives in Connecticut to enquire in a T mobile store where the seller told him that it will be locked for 90 days. Is it so? I could not contact live chat support. Please help.
Firstly, the T-Mobile phone is NOT unlocked, but rather contract/sim free. You don't buy the phone directly from a T-Mobile store or the phone will be locked, but you need to get your friend to go and buy the T-Mobile phone contract free directly from the Apple store.
This phone comes with a T-Mobile sim card, but the trick is to take the T-Mobile sim card out of the phone when you receive it and put your local sim card into the phone and then activate it and then it will remain unlocked.
Remember though that if this phone comes from the US, you will have no valid warranty on the phone for India, as iPhone warranty is not international, so if anything goes wrong with the phone, you have to physically take it back to the US - no shipping accepted.
The phone will also not support 4G/LTE, due to frequency differences.
There are no unlocked phones for sale in the US yet, but if you want to risk the T-Mobile phone, then get your friend to go and buy the T-Mobile contract free phone directly from the Apple store and NOT a T-Mobile store - if you go to T-Mobile, then the phone will be locked, but if you get it from Apple, you should be able to take the T-Mobile sim card out of the phone and then activate it with a local sim card and the phone should remain unlocked.
It is only if you activate with the T-Moible sim card that you are in trouble. -
I am from india and am studying in USA but i am done with my course and going back to india and i have ordered for an unlocked T-Mobile phone.....So will it work in india with the local carriers or will i have to go to T-mobile or apple store to get it unlocked?
If purchased from Apple, it will be officially unlocked & will work in India. Be aware, your warranty/support will only be valid in the US, & the phone will only support LTE in North America.
-
If I purchase an Iphone 5s factory unlocked in the US from the Apple store and bring it to India, will I be able to purchase a global warranty? If not then will i be able to get the phone serviced here in India from the authorised dealer/agent in India?
ankit_shah51 wrote:
If I purchase an Iphone 5s factory unlocked in the US from the Apple store and bring it to India, will I be able to purchase a global warranty?
No, as there is no such thing for an iPhone.
If not then will i be able to get the phone serviced here in India from the authorised dealer/agent in India?
Nope. You'll only be able to get the phone serviced in the US...no one will touch it in India.
Maybe you are looking for
-
Updating a table using cursor is taking long time in oracle
Hi, I am working on the oracle database 11gR2. I am trying update a table column which is newly added through cursor. below is the cursor. BEGIN FOR lcur_tab IN (select l.LOGIN_ID as login_id, lt.ERROR_CODE as error_code from LOGIN l INNER JOIN
-
TypeError: Error #1006 - Removing MovieClip from the stage
I have a movie clip that is called to the stage and once the movieclip is finished it calls a function that removes it from the stage. The code works but I get an error message about 4 seconds after the movie clip ends. Here's the error message: Type
-
[SOLVED]Can´t mount nfs shares!
Hello, I am trying to get up a fileserver. I installed an old PC with Arch and configerd it over SSH. I followed the wiki over NFS and NFSv4. But everytime I want to mount a share that is in the physical map /home/jozef/shares/downloads, I get the fo
-
Hello All, We are using lookup field value in assignment. field1 is lookup field and Lookup table has only one field Name Name a b c Field2 is lookup field and Lookup table(Cross Ref) has 2 fields Name1 Name2 Name1 Name2 (Display fie
-
Hi, Since 10.1.2, we are able to paste files in compatible apps like filer and office plus. The problem is that we cannot paste directory structure including files and folder. Is this a bug? futur fonctionnality or just the receiving application that