In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickn
In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickname) the problem is that now I see the sender identity in messages as a nick name while in the incoming calls I see the first name ( this problem appeared only in ios7
Please help
check in settings > mail contacts calendars, and in the contacts area you should be able to change how the names are viewed
dante
Similar Messages
-
I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.
JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
-
When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.
Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums. -
Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?
Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
Whenever I send a text from my iphone 5 my text messages are appearing on other apple devices in the household. ie Iphone 4 and Ipod.
How do I stop this occurring.You'll have to deselect your phone number on the other devices in Settings/Messages/Receive at/
Check this post about iMessage:
iMessage on iPad and iPhone Explained and De-Mystified -
My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything
I a;ready take off the acces of the computer and reput it
-
I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
How to get the message Sender's information in MSMQ?
Hi, everyone
I am going to develop a Windows server to monitor the messages in MSMQ. Now I wanna get the message sender's name(that is the API of this message, like class name or function name of who send the message.) I make a simple demo and it can easy to get
the message body. But is it possible to get the sender's info by using any MSMQ method ? Looking forward any answers. Thanks so much.
Shuo LeiHi,
Sender object is type of object any time if you want to use any property/attribute of sender object first you need to type cast it with your desire object.
For more information, you could refer to:
http://blog.jsinh.in/managing-msmq/#.VPe5mnkfqM8
http://forums.asp.net/t/343932.aspx?How+can+I+get+values+of+sender+object+in+C+
Regards -
In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!
You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards. -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..
Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck. -
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing. -
"cannot connect to itune store" this is the message that appear each time i tried to long in with my Apple ID
Hello Badejackson,
Thanks for using Apple Support Communities.
Please see the article below about how to troubleshoot this error message you are receiving:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Take care,
Alex H. -
About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... " I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...
Your profile indicates your Mac is running v10.7.2
If that is correct, updating your system software may help.
Click Software Update from the Apple menu.
Restart your Mac after updates are installed then try the App Store.
If you can't update that way, there's a workaround.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac and try the App Store.
messaged edited by: cs -
Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answerCould not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium
Maybe you are looking for
-
Does the warranty cover a stuck pixel?
Will the warranty cover a stuck pixel on my iPad 2?
-
How do I get my application window back on my desktop?
I use an extra LCD display with my G5 which I have temporarily disconnected. When I use Sorenson Squeeze 4.3 it usually appears on the second screen but since I have disconnected it, the application window has disappeared off-screen. I have made sure
-
In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit. This question was solved. View Solution.
-
Downloading iTunes purchases again
Recently, the hard drive in my iMac (having owned my iMac for only a year and a half) broke and was wiped. The Mac was covered and was repaired, but everything on the hard drive was gone. As a result, all of my purchases have disappeared. Is it possi
-
We are moving from Palm Treos to iPhones and I have a user concerned about viewing PowerPoints. How does a user view a PowerPoint (or any large file) in an iPhone which is too large to email? Average 50MB. In the Treos we upload the file and open it