In Iphoto, server doesn't support my username and password combination

In Iphoto, I can not mail directly out, error message says server doesnt support username and password--how do I fix this?

Launch iPhoto.
From the iPhoto menu bar click Help / iPhoto Help
Select the Get Started tab.
On the left select:  Send photos by email
If you don't have a MobileMe account scroll down and click: Email your photos

Similar Messages

  • Sharing via email says the server did not recognize the username and password  combination

    I am trying to share photos in iPhoto via email (gmail) and it says the server does not recognize the username password combination. I have deleted the email account rebooted iMac and re-entered the gmail account info and I get the same message. I have confirmed the username and password are correct.

    LarryHN I guess I should have clarified that. I did try it that way and I am able to email pictures with mail set as the email client. When I change it to iPhoto as the email client is when I get this message. I have the same setup on my Macbook and it works great for emailing pictures from iPhoto. Although I can send them through email client, I prefer doing it through iPhoto.

  • When emailing photos from iPhoto I get a message saying the email server did not recognise my username or password combination.

    When emailing photos from iPhoto I get a message saying the email server did not recognise my username or password combination?

    falKon wrote:
    I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.
    I think you were trying to reply to the OP, next time press 'reply' in the post you are replying to.
    If you are replying to me, what on earth are you talking about?

  • The server at Mac OS X Server Web Services requires a username and password

    I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!

    By the way they are using Internet Explorer 7 when opening these documents.

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Invalid username and password combination woes

    Before I do what I think I am supposed to do... I wanted to run this by you guys first to make sure incase someone found a way. I wish i didn't have to do this but...
    I have a Mac on our domain running 10.6.6. It had a seizure of some kind and i was forced to cold boot it. We got it back up and running and to the login screen, but when we tried logging in to it, the login in screen just shook. No matter what AD account i tried logging in with, SHAKE! SHAKE! SHAKE The next thing i decided to do was unbind and rebind the Mac thinking maybe it had something to do with that. NO GOOD. Not only did I get an error that the Mac could not unbind from our domain, but now, no matter what account i use to try and rebind the mac, I get the dreaded: invalid username and password combination error. WHEN I KNOW THAT'S NOT THE CASE!
    Anyone know how to fix this OTHER THAN downgrading to a version of 10.6.x that CAN bind? If that's even a option???
    Thanks!

    Why is that always any Apple support person or Mac users answer? It's a Microsoft problem. How can it be, I have 20 macs connected to the same network. The mac having the problem has been successfully working for 3 months. It started shaking when the user came in and in the troubleshooting process we removed it and are trying to rejoin it backl on to a domain it has been working on for months and 19 other machines are still working on. How is this a microsoft problem? Please enlightne me? If it sounds like I am frustrated, I apologize, but I AM!

  • HT4736 what do I do when iphoto doesn't recognize username and password combination?

    what is going on,  I can't email photos from iphoto since it does't recognize user name and password combination?

    iPhoto Menu ->
    Preferences ->
    Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

  • Have same username and password for Apple and iCloud. Main email server is btinternet with different username and password. When I try to share a photo using iCloud email I get message that "email server didn't recognise username/password combo". Help.

    I have the same username and password for my Apple account and iCloud. My main email server is btinternet. When I try to share a photo by sending an email by iCloud I get a message "Server doesn't recognize username/password combination". Do I need to login to iCloud with my btinternet password?

    Seeing others with same problem I have gone into iPhoto>Preferences>Accounts and changed password to btinternet password. It worked. Thanks.

  • Setting up SafePoint on NAS, myCloud doesn't ask for username and password

    I couldn't find an answer to this in the forum.  I'm trying to set up a Safepoint on a Synology NAS. I have it configured so that you need a user name and password to access this share the safepoint should go to. When I try to set the Safepoint up in MyCloud it will find my NAS, but will then say "Retrieving Shares", but won't show any.I believe this is where I shoudl be asked for a username and password. Maybe the MyCloud can't see the share because I haven't eneter the credentials yet, but I don't know where else to enter them. I tried it in different browsers in case it's some sort of JavaScript problem, but it also doesn't work in other browsers either. For security reasons I'm not keen on having the share public, without user name and password.  How can I create a Safepoint on my other NAS?

    According to the WD My Cloud User Manual it appears that one has to select the NAS where they want to save the share first before they are possibly given a screen where they can enter in a user name and password. See Chapter 11 in particular Steps 3 and 4 under "Creating a Safepoint". Step 4 shows an example of the username/password screen. If the Synology NAS is not being detected by the WD My Cloud user interface then obviously there is either a problem with how the Synology NAS is detected on the local network or a problem with the WD My Cloud detecting specific NAS devices on the local network. It goes without saying that both devices should be on the same local network and have IP addresses in the same IP range. For example both should have IP addresses in the 192.168.1.x range. Edit to add: There are also the following relevent WD Support links:List of NAS drives validated by WD to work as a SafePoint backup for a WD NASHow to create a Safepoint backup of a WD My Cloud drive on another device Edit to add 2: Per this earlier thread that also discusses using a Synology NAS as a backup location for Safepoint, it appears you may have to enable the option "Enable Local Master Browser" in the Synology DSM before the WD My Cloud will see the Synology NAS on the local network. 

  • What to do in iPhoto, error when sending pics email, username and password not recognized

    I have imported photos from my camera to iphotos, cool it works great.
    But why when I want to email the pics, I get an error message that states
    my username and password arent recognized??

    In the iPhoto preferences ==> accounts delete the account and renter it
    Or better yet IMHO set Apple mail as your email client in the iPhoto preferences rather than iPhoto
    LN

  • HP 8500 PLUS-scan to email - "SMTP server want approval- control SAMTP username and password"

    I have this brand new PRO 8500 PLUS machine, and everything is working except for the "scan to email" function.
    I did the setup in the web interface, in which I configured my GMAIL account to be the outgoing account in the printer.
    In the end I pressed "save and test" and it reported OK! I used my full GMAIL adress as SMTP username, and my GMAIL password as password.
    However, when I scan a paper and try send it to myself (same adress as confgured as outgoing in printer) it says something like(bad translation...)
     "SMTP server demands approval - check that SAMTP username and password is set" 
    Network config is:
    IP adress: 192.168.0.183
    Subnett mask: 255.255.255.0
    Standard gateway: 192.168.0.1
    DHCP
    Primary DNS server: 192.168.0.1
    Secundary DNS server: 0.0.0.0
    Printer is connected wirelessly to a DLINK DIR 655 .
    This question was solved.
    View Solution.

    Hey Cartman9090,
    Alright i did a little bit of researching and this is what i was able to come up with. There are two separate settings that perform two different actions.
    1. Under settings in the printer EWS you have email servers and individual settings for alerts. The email server settings under setting in the ews allow you to set up the product to send problem and status alerts to anyone through e-mail messages. When this function is configured, alerts are automatically triggered about supplies, paper-path status, and other service and advisory information.
    2. Under scan when configuring the scan to email in the EWS this is for configuring the e-mail address which will appear in the FROM portion of the e-mail message sent by the printer. The device allows you to scan documents and send them to one or more e-mail addresses as attachments—without additional scanning software. You do not need to scan files from your computer and attach them to e-mail messages. In addition to send scanned files as emails the device must use a outgoing email profile configured with an outgoing email account.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • I can not accessed J2EE Server because i dont know username and password

    I set username and password as tutorials but not successful.
    and after that i can't access J2EE server with localhost:4848.
    please tell me the way access J2EE server.Or Default username and password of it.
    Thanks your help!

    Hi,
    Can you please send more infomation on exactly what is failing? Are you trying to execute asadmin commands?
    Also, which platform are you running the appserver on? Does the appserver show up in the list of currently running processes?
    I believe that the default username is "admin" and the password is "adminadmin".
    Thanks,
    Kyle

  • HT1277 what to do when i get the message: email server did not recognize username and password combination.

    I changed the password on my iphone yesterda and now i can't send mail on my Imac via My gallery : the message is: email server did not recognize username and password combination

    I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.

  • Firefox doesn't autofill my username and password on Facebook.

    So every site I use autofills with firefox's password remembering system, except the oh-so-frequented facebook. Firefox remembers the username and password in the drop down box of the facebook login forms, but I also use a greasemonkey script (AutoLoginJ) that will find the info firefox remembers and automatically press the button to login for me (so essentially when I go to facebook.com, I'm already on my homepage). So in order to use the greasemonkey script, I firefox to be able to remember my username and password. Any help is much appreciated.
    == URL of affected sites ==
    http://www.facebook.com/

    Hello Delta.
    Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issue, see this article:
    http://kb.mozillazine.org/Password_Manager#Troubleshooting
    I hope it helps.

  • Calling Report Builder From Server(aspx page ) With encrypted username and password

    Hi , 
    Our application needs to have a link to Report Builder which will open a report builder for that current report and user can modify it accordingly.
    Currently our approach is to use a client side(JavaScript) url link which is in form as follows
    http://username:password@domain/ReportServer_SQLDEVELOPER/ReportBuilder/ReportBuilder_3_0_0_0.application?/ReportName
    But we do not want to show username and password in clear text , SO we have tried to pass it through ajax call and call the url from server or pass username and password in Authorization headers . Unfortunately , this does not serve our purpose and we are
    getting Unauthorized in firebug Console .We are using REST Services .Below is screenshot:
    This is a kind of blocker issue for us , So any timely help would be highly appreciated.In case of any queries you can contact me at [email protected]
    Thanks & Regards
    Mohit Methi
    NGC

    Put the domain in the Intranet Zone instead, and try again. They should not be prompted for auth as long as they log in with cached Domain Creds.
    Is the SharePoint site configured to allow NTLM?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • EFI Update available for mid 2011 Mac Mini

    New update available today, check Software Update for the download and follow instructions to update correctly.

  • Issue in Call Forward to Voicemail

    Hi, I am facing an issue in my cisco telephony while making one phone forward to another phone. Below is the Scenario. I have 2 phones, A & B , i have forwarded all calls of Phone A to Phone B. So when i call Phone A its gets forwarded and rings on P

  • Selecting key of Days Range

    Hi All, I am calculating number of days between 2 dates (dt2-dt1)+1 i have a traget table with ranges specified as key     days_from     days_to 1     1     4 2     5     10 3     11     30 4     31     99999999999999 like.... select KEY from days_ra

  • Testing Calendar Portlet

    When I execute the CalendarPortlet from the iAS listener, I get an HTTP-404 file not found. Has anyone encountered this?

  • Help me wrap my brain around two-color printing.

    I am doing my first layout for a two-color print job.  It's a double-sided promo piece for a local non-profit. Armed with my Pantone solid uncoated swatch book (rest assured, we are actually using uncoated paper) I am trying to piece together how to