In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion
In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?
Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
Similar Messages
-
TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions
i have tried to restore my iphone but keep getting error 1015 any suggestion
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
I have a problem with Iphoto '06. I have approximately 28000 photos. Recently all but 5000 have disappeared. I can not find or restore them. Any suggestions?
This is what the inside of an iPhoto 6 library looks like:
Where in there did you look for the image files?
Did you run any updaters pror to discovering the missing photos? What fixes have you tried? Do you have a backup of the library on another hard drive?
OT -
It will not connect but my other apple devices can connect and the wifi works very well. I have moved houses to my house wifi isnt the same as the old one. Also, i have to type in the password every time even if i click autosave. Sometimes it also says invalid password or connection timeout. This has been going on for two months and is getting really annoying. I've tried most of the solutions listed on other discussions, none of them work. Any other tips? Thank you. Ps i've had this macbook for 3+ years
Two questions:
1. Your profile says OS 9.2.x. Is that correct?
2. Impossible to provide "other" tips without knowing what you have aleady tried. What have you tried? -
French characters fail to display properly (have tried all the regular fixes)
I am updating a website with french characters and they are not displaying correctly. This website has been live for a long time and had no problems, but while updating some wording/punctuation on the development (before rolling it into live), I am seeing that my characters are failing. We recently bought CF Builder 2 and I believe this to be the problem, as I had something similar happen like this - but with an email blast - a while ago (I ended up having another worker develop the code on his PC with a different program).
I have googled this and have ensured the following settings are correct:
window-->preferences-->workspace--->text-file encoding: UTF-8
project-->properties-->general-->text-file encoding: UTF-8
I've also tried putting
<meta http-equiv="Content-Type" content="text/html;charset=UTF-8" >
at the top of my pages and they still display incorrect characters when french accents are used.
Any ideas?
Thanks,
Cameronhttp://www.virtualhelp.me/applications/51-office/288-firefox-4-doesnt-save-tabs#yvComment288
this should solve some of your problem if it is because you got the '''newer''' version!! -
my ipod touch is showing a white blank screen...have tried resetting it but nothing! any suggestions??
Let the battery drain completely. Then let it charge for about an hour before trying another reset. Helped with mine.
-
Please help!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I can buy a 1T hd to store photos and videos to, but would need a second one to back that up as well? I guess I need to know how to get aperture and iphoto to keep my photos on a larger drive and how to keep both the imac and that larger hd backed up. Note- we can't get DSL, so off site back up isn't a viable option.
Move your photo and video libraries to an external HD. Apple explains how to do this in:
iPhoto: How to move the Library to an EHD -
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference? -
My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194
See if this helps : http://support.apple.com/kb/TS3694#error3194
-
i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?
edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.
-
Everytime I click on something whether it's on Google or opening an Email etc.. I get a pop up ad appear in another tab. I have tried everything to stop this increasing the pop up blockers and other things it still happens. I don't know what i can do to fix this?!
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
I have a new ipod nano to replace a previous one. I can't copy over my old playlists on to the new ipod. have tried selecting the playlists I want to sync but when I click sync , nothing happens
You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
My PC repeatedly asks for authorization when opening I-tunes library (wont let me play tunes), have tried ALL the suggestions to remedy authorization but to no avail. Anyone got any other suggestions I could try please? I would have thought I-tunes itself should come up with a precise answer to this sort of problem after all this time??
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
Maybe you are looking for
-
The printing should come of actual size half on front and half on back of A4 paper.
-
5800 v51.0.006 Message vibration alert too short
Hello, I recently updated my phone's software from v21 to v51. but one thing is bugging me.. why did the vibration alert when getting a message get so short? I mean before the update the phone vibrated for i think something like 1 whole second.. and
-
Weblogic Server issue in ADF11g
Hi All, Im working in ADF11g . My .jspx used to work but suddenly it is giving the followng error inspite of correct url in the browser. Error 404--Not Found From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1: 10.4.5 404 Not Found The server has n
-
Hello, I have following issue: We are calculating at each year end a tax price 1 in material master (accounting 2) based on moving price and devaluation indicator. This works fine with MRN2. In that run we are updating tax price 1 and devalution indi
-
Repository Creation Utility fails
Guru's and Experts, I am trying to run rcu.bat on windows 7 home premium it fails. (Repository Creation Utility 11.1.1.2.1\ofm...\bin\rcu.bat While executing on dos prompt or just by double clicking on rcu.bat it says cannot find Repository directory