In iTunes: why different run times for same track?

I have occasional repeats of the same given track stored in iTunes. Sometimes, the 2 identical tracks show different running times. This happens when one track came from the Net (downloaded before I started using iTunes, then imported into iTunes) and the other comes from a commercial CD. Do you know why the differing times? FYI: In each case, I have checked the endings of both tracks; they are identical, so the music is the same even though one track is rated to run [much] longer than the other. Also, in "Get Info" there's a way to change the running time of a track, but this is no solution: if I enter a shorter run time, the track will truncate itself, and finish playing before the proper end of the song -- if I enter a longer time, I get dead air after the end of the recording. Any ideas?
Windows XP
Windows XP Pro
Windows XP Pro

"will iphone users in Singapore have access to application from other countries? "
No. You can buy from the itunes store in the country in which you reside.
Each country has the same rules:
"SINGAPORE ONLY. The Service is available to you only in Singapore and is not available in any other location. You agree not to use or attempt to use the Service from outside of the available territory. iTunes may use technologies to verify such compliance."
http://www.apple.com/legal/itunes/appstore/sg/terms.html#APPS

Similar Messages

Execution of TestStand-Sequence in LabVIEW via TS-API: Different Execution times for same sequence

Hello Forum-Members,
I have a problem concerning the execution of an TestStand-Sequence in LabVIEW. I have created a VI that offers the ability to choose a TestStand-Sequence-File and then executes the sequence using the TestStand-API. The implementation is based on an example in C++-Application found following this link:
http://forums.ni.com/t5/NI-TestStand/Unreleased-references-using-engine-API-in-C/m-p/2927314#M46034
The implementation works quite solid in case the VI is executed the first time. The VI processes the chosen sequence in a acceptable duration.
But in case the execution is started a second time, the execution of the sequence takes ca. 30sec more than in the first case.
Until now I have not found a solution and hope someones got a hint concerning this problem...
I am using LabVIEW 2013 and TestStand 2013.
I have attached my own VI, a sample sequence with a small sample VI, so you can reproduce the problem.
Kind regards,
TobiKi
Solved!
Go to Solution.
Attachments:
Exe-TestStand-Sequence.vi ‏25 KB
Sequenz.vi ‏8 KB
Test-Sequenz.seq ‏5 KB

Hi Norbert,
first thanks for your answer.
What would be a reasonable way to replace the "Execution.WaitForEndEx"? My first idea is to get the respective thread of the execution and use the "Thread.WaitForEnd".
To clarify my problem:
The execution of the sequence itself takes longer time and so the execution of the calling VI. I have attached pictures of the log file of the first and second execution.
Further I don't get any dialog popups during the shutdown of TestStand. (I have activated the "ReportObjectLeaks" using the "DebugOptions") While developing the attached VI I've gotten several popups. But these popups disappeared after closing all references.
Maybe you have another hint how to locate the problem.
TobiKi
Attachments:
FirstExecution_20-08-2014.png ‏16 KB
SecondExecution_20-08-2014.png ‏16 KB

TS1424 i bought a book and itunes charged me three times for the same book, how do i submit a claim to get the money back and where do i find then form

i bought a book and itunes charged me three times for the same book, how do i submit a claim to get the money back and where do i find then form

Welcome to the Apple community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Switching between different run-time menu programatically

Hi All
I am planning to build a Bilingual program…….am just doing trial and errors in changing all captions and run-time menu s programmatically with a single button click……….Here my logic is working fine for all captions and graphs also…………..but I could not change the run-time menu……….i am unable to switch between different run-time menus……………
Here I am sending the program am working on………..please have a look on this, and suggest me something………….hope my problem get resolved.
Thanks
Anil Punnam
Attachments:
Caption_program.ZIP ‏31 KB

Hi Anil,
I'm guessing you're using 7.1? When I first ran your program in 8.0, it worked perfectly and switched back and forth perfectly. However, I tried it in 7.1 and saw some bad behavior. The customer run time menu was not updated in the menu bar. It looks to me like the run time menu is changing, but the front panel is not updating. After pressing one of your front panel buttons to change the run-time menu back and forth, if you click on the file menu it should update, although this can lead to some funny looking menus since "affiche" is longer than "file" and you can still see the remnants of the old menu. Try this and let me know if this is indeed the behavior you are seeing (check out the attached pic). I thinkt hat R&D already had a report on this, and that is why it is fixed in 8.0.
Megan B.
National Instruments
Attachments:
RTM.JPG ‏34 KB

ITunes Charged me 9 times for 1 purchase and Support has not resolved it

iTunes charged me 9 times for a single transaction and I'm getting no where in getting it resolved.
Nov 21, 2005: Purchased Season 2 of Lost (videos) for $13.93
Nov 21-22 2005: Was charged over and over again, totaling 9 times for the single purchase
Nov 23: 2005: Initial contact to iTunes support; they tell me this is normal that small charges may be applied to your account as 'authorization requests' Of course, these weren't normal or small charges it was billing error that charged me 9 times for a single purchase.
After contacting them again to reiterate the fact that I was charged 9 times for the purchase, my mail is finally read and an acknowledgments is made that something went wrong. They tell me "We have investigated and resolved the issue you reported. Within 72 hours, you will receive a refund for the duplicate charges through your Paypal account, coming from the iTunes Music Store."
Nov 29 2005: I wait patiently beyond 72 hours for all the refunds to be put in place; some are completed but 2 charges still show. One at the time is valid, its the purchase I made. ** (Not valid today because the music shows as not payed for anymore) **
I contact Support on the 29th stating all of the refunds have not come in, they tell me there is nothing they can do and that I need to contact Paypal. "The best way to resolve this issue is to contact PayPal and advise them of the situation."
I talk to a senior person at Paypal and they tell me there is nothing they can do, that iTunes must issue the refund. Nice. Circles!
I write back again to iTunes Support stating that I had contact Paypal and they stated that there is nothing they can do regarding the refund, that Paypal needs to resolve the matter. iTunes writes back:
"We're sorry that you have experienced this problem with your PayPal account. Unfortunately, we will not be able to notify you when the matter is resolved. Our engineers are trying to correct the errors, and we hope to enable PayPal payment processing as soon as possible. We appreciate your patience."
OK, they at least acknowledge there is a problem (even if they are blaming it on Paypal) and that they are working on it.
Dec 05 2005: Follow up today to get a status as to when I will be refunded for their error, I get no update, only the following response:
"We apologize in the delays in processing this refund, and we thank you for your patience."
I follow up stating I would like the full amount refunded; it seems the original purchase is listed as not payed for so I can't even watch what I purchased! At this point I just
want to be refunded so I can cancel and delete my iTunes account.
Whats bad:
- Can't reject the charge on my cc since it will get rejected back to paypal, not iTunes/Apple (paypal will then likely just close my account and come after me for the money)
- Can't reject charges in paypal, they don't seem to do that
- iTunes/Apple support mails are incredibly canned responses and impersonal
- I'm at the mercy of iTunes/Apple in resolving this; there is no ETA for them to resolve this issue that they created.
- I've asked to be called regarding this matter and the requests have been ignored
Any advice to get this resolved would be appreciated. It is has been an incredibly frustrating experience; I don't much like the idea being forced to pay off a credit card charge for services that I have not actually received and which were charged to me in error.
Mac OS X (10.4.3)

This is EXACTLY what happened to me and many others. Tech support returned most of my money but not all of it. Figure that one out! It is clear no music is downloaded (or in queue), it is clear an unknown error message is produced, and it is clear we, the consumer, are still being charged anyway. Will Apple require a credit card from its customers and alienate those that do not wish to use a credit card? Will Apple insult its customers and make silly suggestions such as 'Use an iTunes gift card' in much the same way a forum moderator has already recommended?
I have an idea: Acknowledge the problem publicly (via email, for example) and fix it in a future update. Customers will be more understanding if they know there is a temporary problem and Apple is working hard to fix it. Oh, and return our money, please!
Windows XP Pro
Windows XP Pro

I keep getting an error message ''dbghelp.dll is missing. please reinstall itunes'' did that 3 times and same results. can't sync my iphone or even open itunes

i keep getting an error message ''dbghelp.dll is missing. please reinstall itunes'' did that 3 times and same results.
i can't sync my iphone and i can't open itunes
how do i resolve this issue?

Taken at face value, you're having trouble with a Windows OS dll.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

2 different lease time on same scope

Hi, is it possible to add 2 different lease time on same scope.
I have server and workstation on the same scope and I want to give the servers longer lease time, than the workstation.

Hi
It is possible to achieve this in the Windows 2012 and higher versions of DHCP Servers using the feature of DHCP policies. You can create a policy within a scope. In that policy you can specify the type of clients you want this policy enabled for. The type
of clients can be differentiated based on
MAC Address
Vendor Class
User Class
Client Identifier
Relay Agent Information (and its sub options – remote id, circuit id and subscriber id)
in DHCP Server 2012
and based on FQDN along with above in DHCP Server 2012 R2.
Once the policy has been created you can set the lease time for the policy as per your needs. For more details you can look at the blog post entry below.
http://blogs.technet.com/b/teamdhcp/archive/2012/08/22/granular-dhcp-server-administration-using-dhcp-policies-in-windows-server-2012.aspx
Thanks

Maximum allowed run time for a task sequence

I found if i left the maximum allowed run time for a task sequence with a defualt value of "0" in configuration manager 2012 r2 cu2,the required task sequence would never run without a maintenance window larger than
12H.
At client side,the servicewindowmanager.log always said this required task sequence had a maximum runtime of 43200 seconds(12h).
servicewindowmanager.log:
OnIsServiceWindowAvailable called with: Runtime:43200, Type:5
Program cannot Run! Setting *canProgramRun to FALSE
There does not exist a Service Window of this Type, for this duration. The Program will not run.
If i set maximum allowed run time to 120 minutes,task sequence would run under a 3h mainenance window.
So if you leave the maximum allowed run time for a task sequence with a value of "0" then client agent will evaluate it as 43200(12h) for a required deployment,is it true? have i missed something?

Hi,
That is correct it will default to the same value as a program with a "Unknown" maximum runtime value, Unknown is also evaluated to 0 = 12h so that is correct behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

Run time for a Report

Hi All,
I have a requirement, where in i want to know whether my report has run for 8 mins or not. If it has run for 8 mins then i have to give an information message saying that the report is taking more than 8 mins so schedule the program in back ground.
Is this possible ?
Please let me know how to know during run time the time taken by a report.
Regards
Rakesh.

Hi Dominic,
The code you mentioned can be put to know what is the time taken by a select statement or the time taken by a particular piece of code. In my program there are several select queries and complex logics.. So i dont think that it is feesible to calculate the run time for each select and then if its increasing 8 mins then to show error !!!!
My report will be called from an external application. If the program is taking much time it will get timed out. So for a precaution we have to tell them that the way you have given the selection screen filter values its going to take more than 8 mins so better schedule a back ground job.

Different sleep times for different monitors?

I'm using a iBook G4 12" with an external monitor (spanned, not mirrored), and I was wondering if there's a way for me to set different sleep times for each of the LCD and the external monitor?
Thanks.
- JC

Nope. They all sleep or none sleep.

Contract - Plant Conditions - Different delivery times for plant

Hi people,
I have a question about contracts , in transaction ME32K.
I enter a Contract number
Edit -> Plant Conditions menu.
Select a plant and I can enter a different Net Price for each item for this plant. How can I enter "Planned Delivery Time" for each item for this plant?
In this case, the vendor has different delivery times for each plant and I cannot enter this information.
Do you know if it is possible?
Thanks a lot!

Hi,
The basic requirement is for the trading of material which is imported and for the material which are purchase locally there should be different invoice for such materials, but while creating the sales order we have only one sales order including all types of materials so in such case we want to create different delivery challans so that different invoice can be made easily or only twi invoice for one delivery challan.
regards,
zafar

Quality info records: different pack configurations for same raw material

how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
thanks
Alisa

You need to use the MPN profile functionality that is a standard part of SAP.
In Config under the purchasing define the MPN profile. There are several options you can turn on/off including info records.
You assign the MPN profile to your material. It now is considered by SAP to be an internal material number.
You then create a HERS material type for each separate manufacturer material number you have. You only need the purchasing view for these materials. You can also create purchasing text views, classification and some others if you wish.
In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
You create a Q-info record for each manufacturer/HERS material combination.
Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material. When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot. The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
Take a look at it and research it. It's not hard to set up.
FF

Why the processing time for loading is taking longtime

Hi All,
why the processing time for loading is taking longtime i want to know the soltion.
Thanks,
chandu

To analyze the process chain and fix it, go through the below document:
[SAP BW Data Load Performance Analysis and Tuning|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b]
Hope it helps,
Naveen

Can we have different output types for same document?

Hi,
Can we have different output types for same doucument.if yes plz describe the steps to perform it
Thanks

Hi,
Generally you can use same out put type for the different document types of PO. You can create different out put types for the same PO, in case you need different layouts that is different forms like MEDRUCK. Please refer below link to create out types . If you want that PO as fax or e-mail can use same out put type .Thanking you.
http://www.sap-img.com/materials/purchasing-tips.htm

In iTunes: why different run times for same track?

Similar Messages

Maybe you are looking for