In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

How would I check to see if the like works when I enable via the inspector pane
If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
I upload the pdf files to the server and link to them as if they were an external web page:
That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

Similar Messages

  • Lost my contacts list and try to restore from backup and it ask for my password to unlock my iphone backup. I don't remember creating a password for it. Can anyone help? Thanks.

    Lost my contacts list and try to restore from backup and it ask for my password to unlock my iphone backup. I don't remember creating a password for it. Can anyone help? Thanks.

    If you encrypted the backup, there is no way around it. You will need to configure your iPhone as a new device.
    From iTunes: About iOS backups:
    In the iTunes Summary screen, select "Encrypt iPhone backup" if you want to encrypt the information stored on your computer when iTunes makes a backup. Encrypted backups are indicated by a padlock icon, and a password is required to restore the information to iPhone. You may want to write down the password for your backup and store it in a safe place. If you use a Mac, when you set a password you can select to store the password in the keychain. With iOS 4 and later, you can transfer the iOS keychain backup to a new device if you encrypt the backup.
    Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
    If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.

  • How do I create a hyperlink to another file?

    How can I create a hyperlink to another file on my Mac?

    Do you really mean "Hyperlink" as in a web page link to your file?
    Or do you want a Mac OS X Alias icon placed in a different folder or on your desktop to a file?  Hold Command-Option keys while dragging the file to a new folder, will create an Alias.
    Or perhaps a Unix Symbolic Link (similar to a Mac OS X Alias, only different).  This is done from a Terminal session using "ln -s /path/to/your/file /path/to/folder/where/symlink/to/be/placed"

  • It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

    it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

    You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
    Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

  • How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

    How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

    Move the domain.sites file from one computer to the other.
    The file is located under User/Library/Application Support/iWeb/domain.sites.  Move this file to the same location on the other computer and double click and iWeb will open it.  Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
    Just create a new site on the same domain file and it will appear below the other site.  If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

  • Long Hyperlink is broken into two lines in PDF/HTML, therefore, the link can't be opened.

    A long hyper link http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/core/os/ebms_core-3.0-spec-os.html works fine in Framemaker. Because it is too long, so it is displayed in two lines in FM. "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/core/os/ebms_core-3.0-spe" is the first line.
    After conversion, when you click the link in PDF or HTML help, you are lead to "http://docs.oasis-open.org/ebxml-msg/ebms/v3.0/core/os/ebms_core-3.0-spe" only, so the link can't be opened.
    I tried Save Book As PDF and Print, both didn't work.
    Could you please help identify this issue?

    Hi Jennifer,
    Did you not only place a hyperlink marker inside of the web address but also apply apply a character format to the whole text of the web address?
    In that case the whole text should serve as a hyperlink regardless of spaces or line breaks.
    This is explained in the online help:
    http://help.adobe.com/en_US/framemaker/using/WSd817046a44e105e21e63e3d11ab7f7960b-7e83.htm l
    Your description sounds as if you rely only on the automatic URL detection in Acrobat. In the Acrobat preferences in the General tab there is an option "Create links from URL". Usually this is activated. It means that Acrobat tries to find out automatically what could be a web address. Often this automatic approach is not correct.
    Best regards
    Winfried

  • Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
    If you can find the problem page you would only have to rebuild it rather than the whole site.
    The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

  • Publishin Error...Can't create the file "shapeimage_16_link_0.png." Can anyone help?

    Publishin Error...Can’t create the file “shapeimage_16_link_0.png.” Can anyone help?
    Here is the original message...
    Publish Error
    "Can’t create the file “shapeimage_16_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."

    Try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • I have to sites on iweb, but can't access #2, only #1. can anyone help?

    Hello everyone,
    I am new to mac, and I've manged to create a web site using iweb. I went on to create a second one. Both are done, but when I publish, the second one never shows up when looking at the link, or when visiting the site, just the first one. Does anyone know how to have both websites operating separately, and that I can send separate links to people to access only the one I sent to them ??? Help is greatly appreciated. Regards, Bola964.

    http://varkgirl.com/iWebFAQ/FAQ%20Home/EFC18081-F59F-4EEA-AA5F-0DB97AAA30D6.html

  • I create an apple id then i want to verify it, i verify it once then  when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

    I create an apple id then i want to verify it, i verify it once then  when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

    How are you verifying it?  Are you responding to the email that is sent?  If not, do so.
    If so, then try changing your password.

  • I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

    I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

    It is probaly just "inline" ie part of the text.
    click on it > Inspector > Wrap > Floating
    Peter

  • I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by hoster, so they should work. Can anyone help me, for these forms are crucial for my business.

    My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
    Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.

    Hi Ingo,
    Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
    Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
    - Abhishek Maurya

  • HT2486 I am sending an email to a group which I have created in my contacts.  I would like to hide the list of people's emails but cannot see how I can do that.  Can anyone help please?

    I am trying to send an email to a group which I have created in my contacts.  I would like to hide the list of email addresses but cannot see how to do this.  Can anyone help please?

    Thank you for your message.  
    I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

  • My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

    My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

    Where was this site hosted?
    Apple eliminated iWeb in July!!!
    http://en.wikipedia.org/wiki/IWeb#Discontinuation_of_iWeb_in_iCloud_Transition
    http://www.macworld.com/article/1160728/apple_mobile_me_transition_faq.html

Maybe you are looking for