In J1I5 Red indicator...

Hi All,
While updation In RG1 through J1I5, I am giving detial Excise Group E1, Plant HIP, Classification IDH for RG1. After Simulating It is giving RED Indicator for some of the material. What will be problem ?
Pl. give us solution.
Yusuf.

no answer

Similar Messages

  • Red indicator in J1I5 updation for RG1

    Hi,
    While updating RG1 with Classification IWO, in stimulation I am getting RED indicators for a particular material document of Transfer posting.
    Please advice me how to overcome this problem.
    Thanx in advance.

    Hi Rithvika,
    Thanks for your inputs.
    I have checked stock in register, there is enough stock of the material and all the receipts have been updated.
    I ran same transaction in QAV and it is working. but in production for this particular material document I am getting red indicator.
    The transfer posting is done from one material to another.
    any other reason? Also please advice how this red indicator cna be changed to green so that it can be updated.
    Thanx,
    Anup

  • Modern Combat 2 -- Red Indicator badge on icon; what does it mean?

    I usually don't ask software-related questions, but this one has me stumped.  I recently bought and started playing Gameloft's Modern Combat 2: Black Pegasus.  Hey, I needed something to do while the power company restores power in the wake of Hurricane Irene!
    Anyway, I noticed that a red indicator (the usual red circle on the game icon) appeared, with a "1" on it.  I searched and could not find out what this means.  Anyone know?

    I know zilch about notifications like this. But if it is a game center game, look in there and see what you can find. I know that you can get messages from friends or fellow gamers - it's your turn to make a move - or maybe a message from the game developers - something like that - some new leader on the leader board - I'm just guessing now.
    Either go to the the Game Center app or tap the game app itself.
    Message was edited by: Demo

  • My MB Pro will not power up. when I look at the connector for the power supply, the green/red indicator on the connector is not lighting up

    It appears to not be charged and when I go to plug in the charger the green/red indicator on the connector is not lighting up.

        Reset SMC.     http://support.apple.com/kb/HT3964
      Choose the method for:
      "Resetting SMC on portables with a battery you should not remove on your own".
         If this does not help, contact Apple.
       Genius Bar reservation:
       http://www.apple.com/retail/geniusbar/
    Best.

  • In the newest firefox - when on youtube watching videos, I no longer see the streaming bar (lighter red) indicating the video has been downloaded. Any ideas why?

    I have just upgraded to the latest firefox.
    I have a problem streaming videos on youtube. Typically, when you stream a video on youtube, you can see on the "timebar", that the video is being downloaded shown in a lighter red, with the solid red the indicating which of the video you're already at.
    However, in the latest version firefox, I longer see the streaming (lighter red) on the timebar, so I have no idea how much it has downloaded/streamed. I have updated my flash etc...but doesn't solve the problem. Can anybody help? Thanks!

    There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
    You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
    *http://kb.mozillazine.org/about:config
    You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
    *http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

  • Premiere Pro won't render red indicator...

    I am running Premiere Pro CS5
    When I go to render my timeline, it begins and renders a little, then stop and plays back.
    My timeline and tracks are selcted, and everything is in my Work Area.
    What could be causing Premiere to do this?
    Thanks for your time.

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

  • HT5622 when I get an e-mail I do not get the notification, i.e. the red indicator on my screen. I have checked everything against my ipad and all appear to be similar but the ipad is ok.

    When I get an e-mail on my iphone 5 I do not get the red button on my mail app. Alos no Blue dot appears when I select the mail app.

    You can use the same, i.e. you can access the same mail account from both devices and keep them in sync if you like.

  • Bricked?  Red circle/dot LED indicator adjacent to speaker

    Wife's iPhone acting up. Warm, tempermental boots/recharges despite repeated resets, and a red indicator shows up that noone seems to recognize: an incomplete circle like "c" with a dot in the middle, perhaps 2mm diam total, illuminated LED apparently, off-screen but on front panel to the immediate left of what I presume is the speaker slot (silver mesh slit at top of screen on face).
    Once in a while I can get it to start up (cool in fridge, reset) but on connection with Mac it flakes out again. Contacts appear corroded (cuprous green moss).
    Willing to toss/replace but she wants her un-synched data. Rogers won't repair, off-warranty. Arrggh.

    Same problem, John -- though my number is 51. Do hope someone out there can be of help!

  • J1i5 error.

    Hi Friends,
    I tried to update the material documnet in J1I5 t-code,its giving red indicator error.May i know what is the error.
    i maintained the material in j1id and also in j-2irg1bal.stock also available fo rhte material but its throwing the error in j1i5 t-code.
    can any one help me to resolve this.
    What will be the solution for red indiactor errors in J1i5.
    Thanks in advance.
    Ravi,M

    Hi,
    Thanks for your help.
    I got the solution for this issue. J-1irgsum table should have some balnce. Reciepts should be greater than issue quantity than only system will allow you to update in J1i5 t-code,otherwise it give you red indicator.
    Thanks,
    Ravi.M

  • Red signal in RG1 updation

    Dear friends,
    i have a critical problem that when i see in J1I5 for IDH classification some materials for
    some materila documents are showing red signal and is not updating RG1 register.
    Please help and guide me on this matter , i have tried a lot.
    Thanks And Regards
    Sachin

    Hi Rithvika,
    Thanks for your inputs.
    I have checked stock in register, there is enough stock of the material and all the receipts have been updated.
    I ran same transaction in QAV and it is working. but in production for this particular material document I am getting red indicator.
    The transfer posting is done from one material to another.
    any other reason? Also please advice how this red indicator cna be changed to green so that it can be updated.
    Thanx,
    Anup

  • J1I5- ERROR MESSAGE

    Hi,
    I tried to update the J1I5 t-code,its giving red indicator error.
    I maintained the material in j1id and also in j-2irg1bal.stock and in addition to that
    1. Table J_1IRGSUM the updated qty is 800 in total receipts column
    2. Table J_1IRG1 the total updated qty 1000 Kg, where 800 Kg with P (packed) indicator and remaing 200 kg without P indicator
    3. so, when i run J1I5, its giving the red indicator. Assume that we have not maintained 200 kg with P indicator..
    Considering the above scenerio, please suggest how to update J1I5??

    Hi Deepa,
    we are trying to do J1I5 for outward ie. IDH- where the total issue is 1000 kg, when i excute the t code, i'm getitng hte eror.. so in J_1IRGSUM table does'nt have any issues.. it has only 800 kg as *** receipts only..
    as i said.. *J_1IRGSUM * table has total receipts as 800 kgs where as in RG1 table it has updted 800 kg wiht P (packed) indicator and the remaining 200 kgs w/o P indicator. assumes becase of this reason. its not allowing as to carry out the J1I5 t code??? pls help how to overcome????

  • Mail Indicator Number

    On my 3G Mail icon, there is an oval red indicator that shows I have 21+ messages waiting. I have marked as read everything in every account on the phone and it still won't go away. How do I clear it and why is it reading so many messages?

    Hi,
    I don't know if this will help or not, but I would try deleting that e-mail account from the phone, then putting it back on the phone. I had an issue with certain calendar events not showing up on my iPhone, and when I removed the calendar from my phone, then put it back on the phone, I had no more problems. It's a simple thing to try, but maybe it will help.
    Cheers!
    Leann

  • Why in my FP-TC-120 Module, the red leds are not lighting

    The red indicator leds are not lighting, even if there its no TC conected, what could it happent the software works fine but the leds still turn off

    The red LED's indicate Open Thermocouple detection. However, each channel can be configured for either thermocouple (temperature) or voltage measurements. If a channel is configured for one of the voltage ranges (+/-25, +/-50, +/-100, -20 to +80 mV), Open Thermocouple does not apply so the LED's are deactivated. Use the NI-FieldPoint software to make sure that your channels are in one of the temperature modes and not in voltage mode.
    Regards,
    Aaron

  • Request status in RED color.

    Gurus-
    I am loading the data from Data Stage to BW.
    First load went thru with out any errors. When Data Stage team scheduled load for second time then I see Red indicator in "Request Status" as well as in "Status" tab.
    When I go to details tab I see RED in "Extraction (messages) : Errors occured", Transfer (IDOCS and TRFC) :Errors occured and "Susseq. Processing (message)".
    When I expand " Extraction (messages)" I see "1000 Records sent (1000 records  received)" in red color.
    and if I expand "Transfer ( IDOCS and TRFC)  "it says "Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished "" in red color. all the Info IDOCS are in green color.
    But I see Transfered and added records in mange screen of DSO. Can I activate the DSO by changing the indicator to green from red?
    Pls suggest with ur valuable suggestions..

    Hi,
      In the monitor right click on the data package1 and do a manual update.
    Jaya.

  • Import; Rename Master File; Why Isn't It Red?

    Importing an image.
    Choose Rename Files, Version Name: Custom Name with Index
    Enter: Custom Name Text
    Check: Rename Master Master File
    Show: File Info
    Version Name looks to be correct. It has the custom name I entered and an index number and it's red indicating I've changed the Version name.
    Why is the File Name not the same as the Version name? I checked Rename Master File.
    Why isn't the File Name red? I'm changing it?
    After I import the files, I checked the Metadata and it appears the File Name is correct.
    Is this a bug in Aperture?
    Or am I missing something?

    I'm having the same problem.
    Gosh, I hope somebody comes along and helps us out on this.
    Regards,
    2 Open Loop

Maybe you are looking for