In J1IEX to edit the excise invoice field

Hi,
I want to post the vendor Excise invoice through J1iex.
but during Good receipt , by mistake Invoice number is entered wrong.
so I want to to change the excise invoice number in j1iex during posting.
but this field is grey out, so how i will make it editable.
i am waiting your reply.
Thanks
Shital D

Hi Sheetal,
Note number 1285986 is already applied in ECC 6.0 . We have to revert back of some code from the note. Please call a ABAP guy and give the same guideline as I mentioned below.
Comment this code from include LJ1IEXKS4 from line number 3819 to 3823.
            IF lv_chflag = 'N'.                                "Note 1285986
              APPEND 'J_1IEXHEAD-EXNUM'       TO lt_fields.    "Note 1285986
              APPEND 'J_1IEXHEAD-EXDAT'       TO lt_fields.    "Note 1285986
            ENDIF.                                             "Note 1285986
          ENDIF.                                             "Note 1285986
Thanks
Sandeep Jain

Similar Messages

J1IEX, error while posting Excise Invoice

Dera Gurus,
While posting the excise invoice for the invoice which has already been captured at the time of MIGO, I am getting the error message " All Part I entries have been canceled for excise invoice 5810 2009"
I have checked the PO history and found that the GR has also not been canceled and moreover the entries are being posted in RG23A Part 1 table. The movemet type 101 has also been maintained for the updation of RG23A part 1
The only thing that I have found suspicious is while displaying the Excise invoice is that Quantity available for CENVAT credit is Zero. I think this field needs to populated. How does this this field gets populated.
Regards
Prabhjot Singh
Edited by: Prabhjot Singh Nayyar on Jun 15, 2009 10:11 AM

Dear All,
I have already checked the table for the Part 1 entry, the Part 1 register is getting updated but it is now allowing me to post the Excise Invoice. As soon as I try to post the Excise Invoice, it gives me the error message " All Part I entries have been canceled for excise invoice 5810 2008 "
Regards
Prabhjot Singh

Printout of the excise invoice

Dear Guru's,
I have maintained the Outpot of J1I0 in the Nace for that particular Customer
Still in J1ip. The Excise invoice is showing no output type
and apperaing in red.
How can this be solved.
regards,
A S

Hi,
You will also have to assign the same output type J1IO in VF02 (Go to ->Headere->Output),then the system will not display the "No output type msg.in J1IP.
Edited by: PJ on Oct 17, 2008 10:33 AM

Issue in the Excise Invoice

Hi
SD GURUS
The requirement is client want to see the accounting entries of Education Cess and Secondry Cess in the accounting document after processing the J1iiN.
They are processing the J1iiN document with the excise invoice type as '' NO BOND '' . After clicking the utilization button while processing in j1iiN the Excise duty, Secondry Cess and Education Cess get disappeared. But in the initial screen after entering the BILLING DOCUMENT, POSTING DATE in J1iiN the Excise duty, Secondry Cess and Education Cess are getting reflected in the appropriate fields.
If we see the accounting document after processing the J1iiN only the Excise Duty is getting reflected the remaining Secondry Cess and Education Cess is not getting reflected.
Kindly Guide me in this.
ANAND

It is possible that you may have to apply a SAP Note. I had faced similar issue in one of my assignment and the issue was resolved by applying a Note.
I do not remember the note number. It would be great if you could look for SAP Note, alternatively If you raise a SAP OSS message, you are likely to get response with the details of Note number.
Regards,
Rajesh Banka

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Is it possible to post the Excise invoice previous month date.

Dear All,
We want to post a excise invoice with previous month date. Is that possible?
We have created a billing document (VF01) last month (October) and not created Excise Invoice (J1IIN).
Now our finance people requirement is to create the excise invoice with last month date.
Kindly let me know whether it is possible.
Regards,
Mullairaja

Yes quite possible provided your FI period is still open. Once you execute J1IIN and clicked the tab "Billing", you can see a field Posting Date where you maintain the billing document date itself if FI period is open.
But from excise point of view, this is wrong due to the fact that excise returns should be submitted on or before 3rd of every month in which case, the excise team would have submitted the returns for October.
thanks
G. Lakshmipathi

Against which vendor the excise invoice passed by dealer

Scenario:Vendor A is supplying me the raw material which he has purchased from vendor B ,So the excise invoice Vendor A has paid to Vinst vendor B as he cannot avail the cenvat on them so he passes it to me.
Now my question is Excise invoice given by vendor A has been issued by Vendor B so when i record this excise invoice in my register ..so should it be recorded against ivendor A or Vendor B.
If vendor B should be against whom my excise register should have entry than ..how to do the same?

Dear Prabhjot,
Thnaks for your reply ..I understand that if VEndor B excise invoice has been passed by vendor A than Excise register needs to be updated with Vendor B.
But in 1IEXwhile u capture and post excise invoice system will show the vendor A but in miscellaneous tab u have field call ship-from
in this ship-from we put vendor code as B manually looking at vendor invoice
this is only way to capture vendor provinding excise invoice other than po vendor as i belive but in excise register i still get the vendor A as excise invoice provider.
Kindly let me know how to get vendor B in my excise register.
Regards
Amit

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

The excise invoice is generatiing with inconsistant effect.

Dear All,
in my client i m having the excise invoice generation with the billing document at single step.
but some there is ome in consistancy in this. some times when we do it in single process the excise invoice is not getting generated.
it means if we are processing 1000 docuemnts its not processing for 300 documents.and when we are going to do it mannualy then also it not showing in due list of excise invoice creation in J1IIN.
please suggest what may be the probable reason for this.
Thanks with Regards
Subrat.

Hi,
To determine the automatic excise invoice have to maintain the default excise groups and series group, even thou every combination is there ,for your non generated invoices. Please sit with abaper and debug in j1iin by giving the billing document number in create mode.
regards

Reg: How to capture the Excise Invoice with respect to Inbound delivery

Hi All,
Please give the process follow for capturing the excise invoice with respect to inbound delivery.
Thanks & Regards
Siva

Hi Siva,
Please check this link
CIN with Example..?
Regards,
Bijoy Kumar

Difference in the excise invoice and Billing document value

HI Experts,
I am working in a Excise based CIN scenario.
I am Abaper and wanted to solve an issue.
basically, We are creating billing document and then creating an excise invoice. but there is a diff between the excise invoice and billing value.
Any input will really help thanks...

hi Lakshmipathi,
Sorry for the delay in replying.
This particular scenario happened to only some invoices which were generated in a day.
After that particular day, this didnt happen but would like to know why it has happened since we didnt want the same to happen again in future.
it is not the billing value. its it billing duty applied on the value.
Please help.

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

User Exit while saving the Excise Invoice in J1IIN

Dear All,
I want know whether anu User Exits are there while saving the Excise Invoice in J1IIN.
The "scenario" here is as follows:
---I will create an invoice(Commercial) in VF01. Suppose I got a number 1234(This is Billing Document number).
---Now I will go to J1IIN and create an Excise Invoice by reffering to the VF01 Billing Doc Number.I will enter all the details. Then I will Save it. While saving I want to check the following aspect:
I want to compare the Billing Document Number and Excise Invoice Number and give error if both the numbers are not same.
---That is I want to see that Excise Invoice and Billng Document number should be same.
I need your suggestion in the above scenario.
I will definitely reward if problem is solved.
Regards,
Raj Kumar Reddy.

Hi Raj,
Here is a list of available userexits for transaction J1IIN :
J_1I7_USEREXIT_DEPOT_BEF_SAVE
J_1I7_USEREXIT_DUTY_IN_EXPORT
J_1I7_USEREXIT_EXCISE_BEF_SAV
J_1I7_USEREXIT_EXGRP_DETERM
J_1I7_USEREXIT_SERGRP_DETERM
hope they are of some use.
Regards,
Philip Johannesen

Cancel the excise invoice in Intra company stock transfer

Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
Anbu

In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka

Maintain Vendor for the excise invoice

Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CS

Hi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil

In J1IEX to edit the excise invoice field

Similar Messages

Maybe you are looking for