In JDev11.1.2, when I select texts in editor, it will copy automatically?

All,
I met one strange thing in the Jdev version 11.1.2, when I select some texts in editor(Java/JSP/XML/HTML), it will copy the selected text automatically, and I can't find which property that I can deselect in preference to disable this function.
And I reinstalled it, this issue is still existed, but other colleagues using the same version don't have this issue, and also I didn't meet this issue when I used previous version(like 11.1.1.5 or 11.1.1.4) .
Anyone knows it?
Thanks,
zeroxin

Does it happen the same way when you use some text editors as well (notepad ? gedit? ).
-Arun

Similar Messages

When I select text, system wide, and delete it, why is the succeeding text then selected?

When I select text, system wide, and delete it, why is the succeeding text then selected?
This doesn't happen all the time, but it's happened enough for me to notice it and get super annoyed by it.
Here's an example. If I have the following text:
The quick brown fox jumps over the lazy dog.
And I highlight quick brown and then press delete, I get: (The red shows the selected text)
The fox jumps over the lazy dog.
So when I then start typing, more text is removed than I want. Sometimes this effect carries over, so that the next couple words are selected once I start typing.
It's wonderfully annoying. So I was wondering if anyone else was experiencing such issues or if anyone might have an idea on how to get rid of this problem.
Thanks.

Ooops. I haven't updated my sig in a while. I'm on 10.8.2 and it happens on a late 2008 Alu Macbook.

How do I get the bold, underline, italics editing option for Notes on iPhone 5 iOS 7.0.4? Option is not appearing when I select text.

When I select text, I don't get an arrow with additional options. What is shown in the image are the only options I get. Is there something I need to do in Settings or something in order to be able to bold, underline and italicize text?
I

I only have an iPod (but it does have the latest software) but I achieved bold text as follows:
1) touch and hold word to embolden;
2) touch Select;
3) touch the arrow head at the right;
4) touch BIU option section of the option bar;
5) touch the Bold section of the option bar.
Having selected the text, the selection can be narrowed or widened using the blue dot. Also, the Bold, Italics and Underline option bar does not disappear once a section has been made, thus bold and underline can be chosen - touch elsewhere on the screen to remove the option bar. When the selected option bar section background turns grey the software has accepted your request. Note that a first go at achieving this might not work if the software has not correctly picked up your touch and may not present you with the correct options - it is intuitively trying to help you and sometimes misunderstands your touch.

Tab focus behavior when searching selected text

In the previous versions of Firefox, when I selected some text on a webpage, right-clicked the text to get the context menu, and clicked the "Search" option (e.g. Search Google for "my text selection") the currently focused tab would stay focused and a new tab would be launched to handle the appropriate search in the background. Ever since I updated to Firefox 13, the new tab now receives focus when I do a search on selected text.
How can I switch back to the old behavior? This change in functionality is driving me crazy. When reading a webpage, I often like to select words and phrases about which I want to learn more and launch searches to Google and/or Wikipedia via the context menu. I almost always like to finish reading the current page before going off to read the new tabs. Even if I did intend to stop reading the current page and go to the new tab, it often takes many seconds for the new tab to load and I would rather keep reading the current page and switch to the new tab manually than stare at a blank tab while I wait for it to load.
In the "Tabs" tab of the options window, there is a checkbox for "When I open a link in a new tab, switch to it immediately." Is there anything like this for new tabs launched by a context menu search?
Thanks!

hey bob, you can enter '''about:config''' into the location bar of firefox, confirm the info notification (in case it shows up), search for the preference named '''browser.search.context.loadInBackground''' & toggle it to true by double-clicking it. that should bring back the old behaviour...

When i select text tool the PCS come slow

hi all i just purchase the photoshop CS 5.1 and it is work fine with every thing just when i select the text tool the photoshop become very very slow and almost die
i try to install it again but the same problem
any help for this please

This usually means that you have some corrupt fonts, or that the OS font cache is corrupt.
See http://kb2.adobe.com/cps/843/cpsid_84363.html

When I select an adjustment layer I do not automatically get a mask.

Every adjustment layer tutorial that I watch suggests that when I select an adjustment layer I should get a mask with it. I must have something set incorrect because in my case I must actually choose a mask manually.
Any ideas?

Cs4/Cs5 look on the adjustments panel flyout menu and check add Mask by Default.
Cs2/Cs3 look at the Layers Palette options from the flyout menu.
MTSTUNER

Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

CS5 InDesign crashing when selecting text

I get this crash when I select text, and then select more text. It takes a usually 3–5 times, but it crashes. I've tried uninstalling fonts and I've tried with brand new documents using system fonts. Any suggestions?
http://pastebin.com/vucbJRbC

.. in which case I could run a cursory check. At the very least I will be able tell whether the file is physically damaged (missing parts of the file), or if it's internally damaged (a bad code in an otherwise good file).
Are you free to post the file somewhere? [Unfortunately, Adobe doesn't allow InDesign files to be shared through this forum ]

When i use trackpad to select text, i must hit keyboard keys twice

i've been using my trackpad successfully for months, but since the last update i've found that when using it to select text by swiping with three fingers, i must hit keyboard keys TWICE to successfully edit text. For example, if i swipe across a sentence and then hit the "delete" button, NOTHING. i have to hit "delete" twice. same with command c, command x, and so on. this is creating real havoc, and happens in nearly all of my applications, including word, dreamweaver, and indesign.
however, this does NOT happen when i select text by tapping.
also, it does NOT happen here in chrome.
i've reset my pram/nvram, confirmed that nothing is checked in my accessibility settings, and reconnected the trackpad. please help...i was just growing to love that dang trackpad.
thanks...annette

Any or all of the following third-party system modifications may be contributing to your problem:
SX-Virtual Link
Soundflower
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

Pages, Numbers & Keynote freeze selecting text only when wifi or cellular are on

Hello, I have iPad Air iOS 7.1, Pages, Numbers and Keynote 2.2. When I select text into a document of these apps don't respond during 2-5 second. Then I can see magnifier mini image freeze till popup menu emerge. This problem doesn't happen in other app like Notes, Safari and even in search option into iWorks app. Besides, when I select the whole paragraph, and magnifier doesn't emerge, it doesn't happen. Therefore, it seems the problem is magnifier animation, but only in iWork apps AND WIFI OR CELLULAR CONNECTION ARE ON. It is very annoying. I have this fail since I acquired iPad Air despite updates. I have reboot the device and restore it too. Then freeze time reduces but step by step using the device a few hours, the time increase. ONLY DISAPPEAR WHEN WIFI AND CELLULAR CONNECTION ARE OFF.
Please, could you check it in your devices in order to verify if the problem is these app programming and Apple must update them or it is my device and I have to request its exchange.
Technical support are been a bit slow confirming it at the same conditions,
- same device - I think that differences about cellular capability or capacity shouldn't be important
- same configuration - wifi and cellular off (then without freeze)/wifi or cellular on (then with freeze of several seconds)
Thanks.

I already receive the technical support answer about this issue, they have tried on selecting text in iWork app within a few iPad Air alternating between wifi turn on and off and they haven't appreciated freezes in no case.
Then it seems that the problem is not related with iWork app but how the device works. However, before to apply for the exchange of it for other, I have pending the following proofs,
- Restoring again the device, install only iWork app without restore backup and try on how it works turning on/off wifi and cellular connections in a new document. If that test fail would indicate the device is broken-down, if it works well would indicate the backup is the problem.
- All the same, it could be other odder explanation, that is the freeze depends on the speed that the connection runs -technical support could has tried on it in fast one and mine is slower. This would be a bad news because would indicate that iWorks app finally are wrong programming - I remember that this fail not happen in other app- or worse, iWorks app could send information by selecting text - I don't know for what and toward where. I know that is a bit paranoid, therefore I hope I haven't to try it on. Besides, it only occur when magnifier appears as a consequence it is a rare interaction between graphics magnifier animation and connections behavior that point out the hardware is guilty, but why only in iWorks app!
I hope I find definitely a solution soon because I have already lost a lot of time. I will expose my conclusions.

Can you change the color of selected text in word?

I use Word 2010, and when I select text it is always blue, is there a way to change the color?

I use Word 2010, and when I select text it is always blue, is there a way to change the color?
My earlier posting was an error.
I apologize.
You seem to be saying that the default colour for text is blue.
You need to change:-
Normal.dotm
- to change the default colour of text.
In order to change the default colour of text take the following steps (that were tested on Windows 7 and Office 2007 - the process should be
similar, if not identical, for yourself):-
1. Open a new blank document (this should
have the default text as blue).
Save that document with a new name for example:-
c:\word\testing_aug_25_2014_2
2. In the above document:-
Insert tab
Text group
Click on the drop down arrow to the lower right of:-
Quick Parts
- then click on:-
Field . . .
The:-
Field
- window should open.
3. In the:-
Field
- window in the field called:-
Field names:
- scroll down to:-
Template
- and click on that option so that it's highlighted in blue.
Now, towards the top right hand corner of the same window, click in the box called:-
Add path to file name
- so that it has a tick (check mark) in that box.
Click:-
OK
The file name of the template should now be inserted into your document.
On my machine this was:-
C:\Users\user_name\AppData\Roaming\Microsoft\Templates\Normal.dotm
The above path might be different for you.
4. I saved my document at this point.
5. Now open the file called:-
C:\Users\user_name\AppData\Roaming\Microsoft\Templates\Normal.dotm
A document should open on your screen (still with blue text) and with:-
Normal.dotm
- in the middle of the Title Bar at the top of the screen.
Highlight all of the text in the document so that it's (for example) black.
Save the file.
6. Close all open documents in WORD and
close WORD itself.
7. Now open a new document and its default
text should be set to the colour that you applied at step 5. above (I used black at that point).
Does that resolve your problem?

Selecting Text from Preview

well, actually selecting text is not the problem, it's the pasting of the selected text.
Let me explain.
I've got a friend who is blind. He is a music-teacher and I help him out, creating playlists in iTunes. Since he is not able to read pdf-files in Braille, I used to preview the playlist, select all text, copy and paste it in a Text-file.
I did have this little trick of find & replace, that I used to add a Return to the end of a line, so he would get a readable list.
Since I bought my new Mac, it did came with *Preview 5*, which works just the way Acrobat does. When I select text, it is selected in Columns, when I paste it, I get all information of column 1, followed by all information in column 2, a.s.o.
Does anybody know a workable solution? Is it possible to install an older version of Preview (*Preview 2.1.0* worked fine) next to the newer one?
aTdHvAaNnKcSe
J. Pas

Thank you for your response.
Acrobat is the solution indeed. I can save the lists as pdf, open in Acrobat Reader & select the text like I used to in Preview.
(Which, by the way is strange, it never was possible this way in Acrobat.... That's why I was so happy with the old Preview.
Thank you again. I hope that in the future I can help somebody with the little things I know.
Greetings
J.Pas

Having trouble selecting text in Illustrator CS5

Hi!
I've a little problem, when I select text by double click it do not show me the black selection...I don't know why?
Any ideas?
Thx
Ciao!

If you double-click on a text with the selection tool, the text tool should get selected and the text-cursor is set into the text.
What do you want to do with the text object? Do you want to edit the text (then double clicking is OK) or do you want to push the text around the artboard, then don't double click.

Selecting Text

When selecting text in a PDF to copy, the tool selects way more than what i am trying to select. Anyone know how to fix this? I just want to select the specific text i am targeting it's almost like the tool thinks the font size is massive or something and that's why it is selecting the way it does...

On the Centro, you can select text one of two ways (that I have figured out...it depends on what application you are in) without the stylus:
In VersaMail, push the "Function" key (the solid white key to the left of the Z on the keyboard), and while holding it down use the 5-way navigator pad (up-down) to highlight phrases or sentences, or (left-right) to highlight words. It does not let you select more than just one word or phrase, depending on the sentence structure. In other words, you can't continually press the nav pad to select an ongoing amount...just one word or sentence/phrase at a time.
In Documents To Go, instead of the Function key, you press the "Shift" key (the up arrow to the left of the 0 ), and then the nav pad. But here, it's much more useful, and you can select unlimited text going in any direction (up, down, left or right).
Hope the Treo 680 works in a similar fashion.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Question about selection text.

when program is created and need to be transported to production does selection texts always go with it?

Hi Kishore...
The selection texts will not automatically go with the program...Suppose u have a TR for a program ..
Now wen u create selection texts using goto-> textelements-> selection texts then activate you will be asked for A new TR. Then u can transport the same..
Reward points if the abv is useful....

In JDev11.1.2, when I select texts in editor, it will copy automatically?

Similar Messages

Maybe you are looking for