In Krishna moorthy's weblog

Hi Moorthy,
In your weblog---Walkthrough with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
While creating 2nd receiver determination
sender: IP_File_To_File
Receiver: BS_FILE_BPM
I am not getting Receiver Agreement (Communication Channel) CC_File_IN
How & where should i create that ?
Could you please explain
Thanks,
Ram

Hi,
First of all, Are you using Business System or Business Service ?
If you are using Business Service , then open Business Service in the Integration Directory and then you can Sender and Receiver Tab. Add your Reciever i,.e Inbound Async Interface into that..and save it
Did you create Communication Channel ? For this create a Communication channel under business system or service BS_FILE_BPM as a Reciever communication channel of type file.
Step no 4 in the blog in the directory.
Regards,
Moorthy

Similar Messages

Java claases for mappin

Hi,
i would like to use Java mapping.
In saw in the weblog that i need to use the following java packages: - where can i downlod it from ?
com.sap.aii.mapping.api.StreamTransformation
org.xml.sax.*
java.io.*
org.xml.sax.helpers.DefaultHandler
javax.xml.parsers.SAXParserFactory
java.util.Map
javax.xml.parsers.SAXParser

Hi,
The package com.sap.aii.mapping.api.StreamTransformation can be obtained from SAP service Market place.
Check these-
Re: Java Mapping API - aii_map_api.jar
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions ( in this blog Mappings->Question No 5)
http://help.sap.com/saphelp_nw2004s/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
Thanks,
Moorthy
Message was edited by: Krishna Moorthy P

Query on Integration process

I want to know the functions of each steps we using while creating an Integration Process in IR.

Hi Shankar,
These are the step type in IP
Receive Stepn -
To receive the outbound message
Send Step -
> To send a message.
Receiver Determination Step -
> It determines the receiver of the message.
Transformation Step -
> The mappin is done using this step.
Switch -
> It is a conditional statement where only one branch gets executed.
Block -
> It holds a set of steps inside it.
Fork -
> All the branches of the forx are executed in parallel.
Loop -
> It loops thru the steps defined in it.
Container Operation
Control step
Wait Step -
> Waits for an defined unit of time/message.
Undefined Step
In addition also have a look at this blog <a href="/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm Through With BPM</a> by Krishna Moorthy
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
<a href="/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time a BPM to collect messages for a set interval of time</a> by Daniel Graversen
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

Error during Cache Refresh in 2004s after installation

Hi All,
we are getting the following error when we did the Cache Refresh after completing the installation and configuration of 2004s PI usgae type.

Error data from ID:Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time.
Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine.
This is usually structured as follows:
af.<SAP System ID>.<Name of application server>
Error info in SXI_CACHE:
HTTP Status code 401 unauthorized.
Error data from RWB:
Cache notification from Integration Directory failedError when accessing the System Landscape Directory
---Detailed Error Message
Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.ltiib00812, string
would be great if somebody could help us.
Thanks in advance.
RGds,
Vasanth.

Hi
Check this Blog by Krishna Moorthy for all HTTP erros
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Also check the blog by Michal
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Thanks,
Prakash

Hmi_cache_refresh_service not working

When I activate a communication channel in ID I get an information message saying "Attempt to determine which Adapter Engines are affected by data changes failed". When I look at the log it says "CPA Cache not updated with directory data.". The detailed trace is
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://mbsdalxi50.miller.americas.gcn.local:50000/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xid.mbsdalxi50), due to: HTTP 503: Service Unavailable
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDataFromDirectory(DirectoryAccess.java:382)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:547)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:581)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager.initializeCPACache(CacheManager.java:265)
 at com.sap.aii.af.service.cpa.impl.startup.StartupManager.initializeCPACache(StartupManager.java:220)
 at com.sap.aii.af.service.cpa.impl.j2ee.sapengine630.ServiceFrameImpl.startCPACache(ServiceFrameImpl.java:129)
 at com.sap.aii.af.service.cpa.impl.j2ee.sapengine630.ServiceFrameImpl.start(ServiceFrameImpl.java:49)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:74)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:100)
The HTTP connection & services are OK. I re-created the HTTP connection and bounced the server for couple times.
When I look at the RWB--> Component Monitoring --> Adapter Monitoring, I see most of the adapters (File, JDBC etc) are greyed out. We are on XI 3.0 SP14, we did not applied any Service packs recently too.
I appreciate ypu help in this issue.
Thanks.
Srini Vaidyam

Hi,
Check this SAP note- 764176,741214
Also check SM59->RFC destination type "H" test connection in XI system
Also refer this Cache Refresh Guide-
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
When I look at the RWB--> Component Monitoring --> Adapter Monitoring, I see most of the adapters (File, JDBC etc) are greyed out.
>>>For this check Adapter Metadata are imported into the Repository.(SAP BASIS Component)
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Multi Mapping 1:N Split

Hi ,
My scenario is 1: n Split. I have created one intermediate structure (B) and doing splitting due to satisfy all business rules.
A is the source is the Target. (1: N split)
A  B
B C
A and B has the occurrence of 1.
B has the occurrence of 1. C has the occurrence of 0.unbounded.
I have specified the Source and Target interface is A  C.
I got the message type, but I try to give Message mapping for A B & AC, it is not allowing me to give two multimappings in interface mapping.
Please let me know have you found any answers.

Hi Suresh,
Your both mapping structure should have MultiMapping Envelop..because you are using MultiMapping in the interface mapping, i.e 1:1 Mapping with 1:N mapping.
Go thru this SAP Help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
Similar Discussion-
Multiple Mapping programs in one Interface mapping
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Different options for message mapping in BPM

Hey guys
i m in the learning phase of BPM and am kinda confused with the different ways we can do message mapping in a BPM scenario.
first of all we can do message mapping before BPM,we can also do after BPM and lastly we can do inside BPM(ofcurse this is not recommended as its too resource consuming)
i have bene through starters blog on BPM by Krishna moorthy and Arpit seth,and now am wondering how to use the mapping in diff. ways
suppose i m doing a simple File to File with BPM(just for practise purpose)
now here is what i have designed in IR
DT_sender_File DT_receiver_File
MT_sender_File MT_receiver_File
MI_Outbound_sender(async,outbound), MI_Inbound_receiver(async,inbound)
AI_sender(abstract,async) AI_receiver(abstract,async)
MM_File_File(using MT_sender_File and MT_receiver_File)
now i want to clear some doubts about interface mapping.my understanding is
if i do interface mapping between MI_Outbound_sender and AI_receiver,this will be interface mapping before BPM.
if i do interface mapping between AI_sender and MI_Inbound_receiver,this will be interafce mapping after BPM
and if i do interface mapping between AI_sender and AI_receiver then it will be mapping inside BPM.
is my understanding correct?if yes,then does that means we can we any of the above mapping in our scenario.(if we dont consider the performance issue as of now)
thanx
saif

Hi Saif,

is my understanding correct?
Yes, thts correct
if yes,then does that means we can we any of the above mapping in our scenario
Of course, u can use any of them (overlooking the performance issue)
Regards,
Prateek

SOAP : Receiver Adapter Security Settings in VA

Hi,
In the RFC to Webservice, synchronus scenario, I am getting HTTP 401 Unauthorized error.
I would like to know, do I need any extra security settings for the receiver SOAP Adapter in the Visual Administartor?
I configured proxy and comm channel, they are fine. Like the sender adapter, if I need any extra security settings please let me know.
Thanks &
Raj.

Hi Raj,
Check this SAP note-856597
Verify the userid/password etc..
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Howto use Converting File Content in Rec. Adapt. to suppress a xml-element

Hi,
we use PI/700, SP6.
I have following structure (example):
<MsgOut>
<Sender>Partner1</Sender>
<Receiver>Partner2</Receiver>
<FlatPayload>
 blabla blabla
</FlatPayload>
</Msgout>
Now I wanna use a XI-File-Adapter to write just a Flat-File with the content (of the element <FlatPayload>):
 blabla blabla
(in other words: I wanna suppress all other xml-elements beside of FlatPayload)
But I'm not able to configurate this with the function "Converting File Content"
I tried different possiblities:
e.g.
setting yyy.fieldFixedLengths = 0 and yyy.fixedLengthTooShortHandling = Cut
(yyy = Sender and Receiver)
or
just defining "MsgOut,FlatPayload" as RecordSet Structure (without Sender and Receiver)
Result: no success.
Now my question: is it possible to suppress some xml-elements?
Thanks for your help!
bye
Wolfgang

HI,
You can suppress the XML Nodes/Elements over here. Not Fields ..
For e.g if your outout xml is like this
<MsgOut>
 <Sender>Partner1</Sender>
 <Receiver>Partner2</Receiver>
<FlatPayload>
 <flatdata> blabla blabla</flatdatat>
</FlatPayload>
</Msgout>
In this case you can suppress the <FlatPayload> node/element here.. Using Cut Parameter in the Receiver File Content COnversion.
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
So in your case, you can restructure your data type as you required.. I have mentioned in vice-versa here
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Integration Repository: change XSD type in data types

Hi,
we created data types for our interface where we used the XSD type float and integer. We built on that Message types and Message interfaces and used them as abstract types in a BPM scenario.
During our test phase we encountered errors with these XSD types and found out that it is better to switch the XSD type to string to get correct values.
However the changes in XSD types are obviously only visible in the Integration Repository. XI creates on Application Server side in the XML Object Type Builder an object which doesn't notice this change. And because of that we get still errors.
So does anyone know how to get this XML Object Type changed? We don't want to delete everything and create new message types?
Thanks in advance,
Christina

Hi Christina,
First go to SXI_CACHE -> Refresh the cache.
Also check for the Repository Cache Refresh/Notifciations..
You mean you have changed the xsd in the External Definition ...
If so , just go to Message Interfaces and just select the External definition once again and activate the same.
If you change the Data types then , if there is a change in field length/type then try to redo/reselect the datat types for the message types and activate once again.
For BPM just change something.. and activate once again..
Also check this blog- to activate Runtime version of the BPM
/people/krishna.moorthyp/blog/2005/11/28/inactive-integration-process-ip-at-run-time
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

File Adpater Module Configuration

I have a scenario where i need to send the file to webservices,the file is in xsd:base64 binary format,the file is getting splitting up in the moni inbound message payload,I think this can be rectified by using module conifguration in file adapter by using tranform beam & converting to base64 binary,Can any one please tell me how to use processing sequence & module configuration for base 64 binary.....
Advance thanks for your help
Sriram

Hi,
Check this blog
/people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
HowToGuide-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Need to know the jar file...?

Hi,Iam writing an java program which is going to send messages to the remote websphereMQ server,program compiled successfully while in execution it throws error.The prgram is
com/ibm/jvm/ExtendedSystem/*
Use source code downloads, example commands,
and any other techniques at your own risk.
No warranty is provided.
import java.util.Properties;
import javax.jms.JMSException;
import javax.jms.TextMessage;
import javax.jms.Queue;
import javax.jms.QueueConnection;
import javax.jms.QueueConnectionFactory;
import javax.jms.QueueSender;
import javax.jms.QueueSession;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import java.util.Hashtable;
public class Sender {
 String url_;
 String name_;
 QueueConnection conn = null;
 QueueSession session = null;
 Queue queue = null;
 public Sender(String url, String name) throws JMSException, NamingException {
 url_ = url;
 name_ = name;
 this.initializeSender();
 private void initializeSender() throws JMSException, NamingException {
 /* Properties props = new Properties();
 props.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
 props.setProperty("java.naming.factory.url.pkgs", "org.jboss.naming");
 props.setProperty("java.naming.provider.url", url_); */
 String icf = "com.ibm.websphere.naming.WsnInitialContextFactory";
 //String url="iiop://192.168.2.45:1421";
 // Initialise JNDI properties
 Hashtable env = new Hashtable();
 env.put("java.naming.factory.initial",icf);
 env.put("java.naming.factory.url.pkgs","com.ibm.ws.naming");
 env.put("org.omg.CORBA.ORBClass","com.ibm.rmi.iiop.ORB");
 env.put("org.omg.CORBA.ORBSingletonClass","com.ibm.rmi.corba.ORBSingleton");
 env.put("javax.rmi.CORBA.UtilClass","com.ibm.rmi.javax.rmi.CORBA.Util");
 env.put("javax.rmi.CORBA.StubClass","com.ibm.rmi.javax.rmi.CORBA.StubDelegateImpl");
 env.put("javax.rmi.CORBA.PortableRemoteObjectClass","com.ibm.rmi.javax.rmi.PortableRemoteObject");
 env.put("java.naming.provider.url",url_);
 InitialContext context = new InitialContext(env);
 QueueConnectionFactory qcf = (QueueConnectionFactory) context.lookup("QCF");
 conn = qcf.createQueueConnection();
 queue=(Queue)context.lookup(name_);
 session = conn.createQueueSession(false,QueueSession.AUTO_ACKNOWLEDGE);
 conn.start();
 public void send(String text) throws JMSException, NamingException {
 QueueSender send = session.createSender(queue);
 TextMessage tm = session.createTextMessage(text);
 send.send(tm);
 send.close();
 public void disconnect() throws JMSException {
 if(conn != null) {
 conn.stop();
 if(session != null) {
 session.close();
 if(conn != null) {
 conn.close();
 public String getTopicName() {
 return name_;
 public String getTopicURL() {
 return url_;
 public static void main(String args[]) throws Exception {
 System.out.println("Starting JMS Example Sender");
 Sender sender = new Sender("iiop://192.168.2.45:1421", "ASMQUEUE");
 System.out.println("Sending list of data");
 sender.send("Krishna Moorthy");
 sender.disconnect();
 System.out.println("JMS Example Sender Complete - list sent");
}During Execution followng error occurs,
D:\jboss-4.0.5.GA\WebSphere_JMS>java Listener
Starting JMS Example Listener
performing lookup...
Error creating listener: javax.naming.NamingException: Failed to initialize the
ORB [Root exception is org.omg.CORBA.INITIALIZE: can't instantiate default ORB i
mplementation com.ibm.CORBA.iiop.ORB vmcid: 0x0 minor code: 0 completed: No]
javax.naming.NamingException: Failed to initialize the ORB [Root exception is or
g.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.ibm.COR
BA.iiop.ORB vmcid: 0x0 minor code: 0 completed: No]
at com.ibm.ws.naming.util.Helpers.getOrb(Helpers.java:293)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(Ws
nInitCtxFactory.java:365)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:102)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:40
8)
at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:131)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Listener.initializeListener(Listener.java:78)
at Listener.<init>(Listener.java:31)
at Listener.main(Listener.java:112)
Caused by: org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementatio
n com.ibm.CORBA.iiop.ORB vmcid: 0x0 minor code: 0 completed: No
at org.omg.CORBA.ORB.create_impl(ORB.java:297)
at org.omg.CORBA.ORB.init(ORB.java:336)
at com.ibm.ws.orb.GlobalORBFactory.init(GlobalORBFactory.java:77)
at com.ibm.ejs.oa.EJSORBImpl.initializeORB(EJSORBImpl.java:174)
at com.ibm.ejs.oa.EJSClientORBImpl.<init>(EJSClientORBImpl.java:98)
at com.ibm.ejs.oa.EJSClientORBImpl.<init>(EJSClientORBImpl.java:74)
at com.ibm.ejs.oa.EJSORB.init(EJSORB.java:386)
at com.ibm.ws.naming.util.Helpers.getOrb(Helpers.java:284)
... 8 more
Caused by: java.lang.NoClassDefFoundError: com/ibm/jvm/ExtendedSystem
at com.ibm.rmi.util.JDKBridge.setCodebaseProperties(JDKBridge.java:226)
at com.ibm.rmi.util.JDKBridge.<clinit>(JDKBridge.java:205)
at com.ibm.rmi.util.RepositoryId.<clinit>(RepositoryId.java:122)
at com.ibm.rmi.iiop.CDROutputStream.<clinit>(CDROutputStream.java:1077)
at com.ibm.rmi.corba.ORB.<init>(ORB.java:250)
at com.ibm.rmi.iiop.ORB.<init>(ORB.java:166)
at com.ibm.CORBA.iiop.ORB.<init>(ORB.java:521)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at org.omg.CORBA.ORB.create_impl(ORB.java:295)
... 15 more
Done listening
In my application classpath following jars are used : jms.jar,naming.jar,namingClient.jar,ibmorb.api,ibmorbapi.jar,jndi.jar
I need to know the jar file name for this class : com/ibm/jvm/ExtendedSystem.And also tell me the solution to solve the above error.Anyone know the solution please reply as early as possible..Thanks in advance

Have you checked if any of the jar files in your class path contains the missing class ?

False Error in the Adapter Monitor/File Adapter

I have a receiver file adapter that is showing a 553 Permissions error when the file is actually delivered. This shows up in the adapter monitor and the message monitor.
I've been looking around but I couldn't find anyone who had this problem.

Hi Mark,
I think this error is because of Spaces/or and Invalid Characters like -!"£$%^&*'#... in the file name.
Just check it. ARe you using FTP server ? or NFS ?
If it is FTP then also check that user has a file write permission in the FTP server
>>Also this may be because of you don't have righ to write the directory/file(file permissions) with the name already exists i.e overwrite rights..
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Mail to File Scenario

HI,
The scenario is like I am reading data from the attachment of an email using mail sender adapter and creating a file at unix server.
Please provide me any good links which gives step by step configuration.

Hi Priya,
Did u try out with Adapter Modules to get these attachment info ?
Else try out with that option..
check out this thread [if you did not go thru before]:
Re: sender mail adapter - attachment name
Hope this helps, Regards, Moorthy
Edited by: Krishna Moorthy P on Dec 20, 2007 10:15 AM

Problem with RFC sendder adapter.

Hello All, Any help will be greatly appreciated. I am creating interface from CRM to XI using RFC adapter and XI to Forums using SOAP adapter. I configured in IR and ID and trying to push the RFC in CRM and I am getting the following error.
lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS
I went through the previous forums and I got no luck following those recommendations.
Thank you very much for your help.

Hi ,
Check these-
1) Sender Agreement and Program Id for the RFC is correct or not
Sender RFC Adapter
Refresh the cache of the Adapter Engine.
1) sxi_cache->goto-->AE Cache
2) check for CPA Cache also
Just go thru following link from service.sap.com
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
Did you refresh Adapter Metadata in the SLD ? This is mentioned in the Adapter Monitor document.
Change the RFC adapter once again and activate the same. and then run the scenario. Did you change the RFC after importing..If so again import it.
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

In Krishna moorthy's weblog

Similar Messages

Maybe you are looking for