In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps.

Similar Messages

How to copy and edit pages once they have been scanned to my desktop

I have a many page report I want to copy and send as one or more PDF files. I scan the page, remove it to my desktop and either slide it onto a blank pages or I Photo, where I make the print darker, etc. and export to my desktop..as file, jpeg document....tried them all.
Once on the desktop, it won't allow me to add or subtract any information...I can't even select all and copy it. I can't remember how I use to do this so I would come up with a copy that I could edit and also add several other pages to the bottom of the first page, to send as a pdf, rather than have to send each page separately.'
Is there a way to do this?

If you are at the point where you have several .jpg images that you want to turn into a single PDF document,
Open each .jpg image in Preview and Save As a PDF file.
Do that for all of them.
In Preview click on the sidebar and one image will be there.
From Finder, where reside your recently converted .jpgs to single PDFs drag one to be underneath the existing one and so forth untill all single PDFs are showing in the sidebar.
Get the focus back on Preview by clicking on it, and then Save As and that will produce one multi-page PDF document.
Note, The last image you converted will be the first image in the new PDF, so you might like to close Preview and then reopen it with the first image, just to make sure you get them in the desired order.
Mac OS 10.6.8
Preview 5.0.3

Its stupid but how do I download my pre-ordered songs once they have been purchased and released?

I'm not very good at using itunes and recently I have pre-ordered an album, it has become avaliable to buy today and it says I have purchased it along with every song in the album so how do i download this alum/these songs to my libary?

Perhaps?
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519

Iweb question. How can you remove music from a page?

How can you remove music from a your welcome page on iweb? Dumb but I can'f figure it out.

Hi ...
Try posting in the iWeb forum here.

How to clear a private static class attribute once it's been created?

<pre>I'm working with an instance of a complex Class object that has been created using the function module HRXSS_CAT_APPLICATION_INIT. The Class object that I am trying to work with is CL_XSS_CAT_BUSINESS_LAYER and in particular its Static Private component attribute PROFILE. 
The issue that I am having is that the first call of this function module creates and populates the Static Private component attribute, PROFILE, for the instance of this Class and I do not know how to initialize it once it's been created. The PROFILE attribute is an object reference to an instance of Class CL_XSS_CAT_PROFILE. 
I want to reset/intialize this Static Private component. I can then call a Class Method with different parameters so that it repopulates PROFILE with different attributes. There is no Public method to do this in CL_XSS_CAT_BUSINESS_LAYER and even the Private method INIT_PROFILE, the logic first checks to see if the PROFILE component is initial before creating a new PROFILE object instance. All the Attributes of the CL_XSS_CAT_PROFILE object are Static and Private.
 
I would appreciate any insight anyone might have in how to reset/initialize this Class component attribute. 
Thanks much, 
 
Graham 
Sample code snippet is as follows:
 
DATA: lr_cats_application_rfc TYPE REF TO IF_XSS_CAT_APPLICATION_RFC,
lr_core TYPE REF TO IF_XSS_PT_APPLICATION_CORE,
lr_core TYPE REF TO CL_XSS_CAT_1_APPLICATION_CORE,
lr_instance TYPE REF TO CL_XSS_CAT_APPLICATION,
lr_business_layer TYPE REF TO CL_XSS_CAT_BUSINESS_LAYER,
lr_profile TYPE REF TO CL_XSS_CAT_PROFILE,
lr_profile_temp TYPE REF TO cl_xss_cat_profile.
DATA: l_employee TYPE pernr_d.
DATA: l_employee_tab TYPE rhxss_cat_employee_t.
CASE im_command.
WHEN 'DATESELECTION_PRVPERIOD'.
*-> navigate to object component reference for CL_XSS_CAT_PROFILE instance
lr_cats_application_rfc = im_ref_to_parameter_cache->REF_TO_APPLICATION.
*-> navigate to object component reference for CL_XSS_CAT_1_APPLICATION_CORE
lr_core ?= lr_cats_application_rfc->get_core( ).
*-> navigate to object component reference for CL_XSS_CAT_BUSINESS_LAYER
lr_business_layer = lr_core->business_layer.
*-> navigate to object component reference for CL_XSS_CAT_PROFILE
lr_profile = lr_business_layer->get_profile( ).
l_employee = im_ref_to_parameter_cache->pernr.
append l_employee to l_employee_tab.
 
*THIS IS WHERE I AM HAVING ISSUES...I WOULD LIKE TO CLEAR/INITIALIZE THE STATIC PRIVATE COMPONENT LR_BUSINESS_LAYER->PROFILE BEFORE CALLING THE METHOD INITIALIZE_FOR_TIME_RECORDING 
 
 *THE FOLLOWING LINE FAILS ON A SYNTAX CHECK WITH 'FIELD "PROFILE" IS UNKNOWN. IT IS NEITHER IN ONE OF THE *SPECIFIED TABLES NOR DEFINED BY A "DATA" STATEMENT
 
clear: lr_business_layer->profile.
CALL METHOD lr_business_layer->initialize_for_time_recording
EXPORTING
im_employee_tab = l_employee_tab
im_profile_id = 'MODAPPR1'
im_startdate = sy-datum
EXCEPTIONS
pernr_not_enqueued = 1
no_pernr_for_user_found = 2
profile_not_found = 3.</pre>
Edited by: Matt on Aug 1, 2009 12:44 PM

OK...I apologize but I did not dig deep enough to see that the Enhancement Framework allows for the addition of Methods to Classes/Interfaces. Most of this ABAP OO stuff is still quite new to me so I'm struggling with syntax and what is and isn't possible based on how everything is declared. I guess now that I know I can do this I am having some problems understanding how singleton Class objects work and how to 'reset' them.
The Class instance based on CL_XSS_CAT_BUSINESS_LAYER has a Static Private attribute PROFILE that is an object reference to the singleton Class instance CL_XSS_CAT_PROFILE.
The singleton Class instance of CL_XSS_CAT_PROFILE has all of its attributes set to Static Private. If you look at this Class in SE80 you see that one of its attributes is also called PROFILE and is an object reference variable to itself.
So the issue I am having is how to go about 'initializing' this singleton object so that I can 'recreate' this singleton object using a copy of the existing S
I used the enhancement framework to create a copy of the CL_XSS_CAT_BUSINESS_PROFILE Instance Private Method INIT_PROFILE , called in INIT_PROFILE2, but I am not sure how to 'clear/reset' the instance of the CL_XSS_CAT_PROFILE object.
Since PROFILE is an attribute of the CL_XSS_BUSINESS_LAYER object, I thought that a simple CLEAR PROFILE would reset the object but this is not the case. Within this method the FREE clears the value of the reference variable PROFILE but as soon as you step into the method me->init_profile, the value of PROFILE goes back to what it was. I need for all of the CL_XSS_CAT_PROFILE instance attributes to be reset or initialized so I can fill them again. I think I'm getting confused on the scope of things...should I be enhancing the CL_XSS_CAT_PROFILE Class with 'setter' methods so I can initialize all of the Static Private attributes that way instead of trying to clear all the attributes at a higher call level?
Any assistance with helping me with my thought process or approach to this would be much appreciated.
METHOD INIT_PROFILE2.
FREE PROFILE. >>> is reset but it does not carry through to next method call and does not clear all the attributes of the object referenced in PROFILE
CALL METHOD me->init_profile
EXPORTING
IM_PROFILE_ID = im_profile_id
etc...

HT1329 How do you deauthorize ipods that no longer work or have been stolen. What does it mean that you only have 5 devices that can download your itunes library. How do you deactivte old serial numbers and add new ones as of now we only have one ipod

Over the years we have owned many i-pods. Most of them ran out of juice or were just outdated some even stolen. As of right now I have one i-pod that should be authorized to download music from my library. I plan to get a new one. My question is how do you deactivate all the old i-pods so that i-tunes doesnt think I have all these pods downloading from my personal lbrary of music. If I get a new one and plug it in it will say you are authorized 1 or 2 or whatever it is at this point to download music from this libtary. How to I get rid of all the old devices (serial numbers) that don't draw from my i-tunes library anymore?

Ipods/iphones/ipads/apple tvs are not authorized at all.
Authorization applies ONLY to computers.

How do you remove your credit card details so they don't ask for them again!!!

I had my card linked but want to remove it and use my gift cards I got for Xmas and its not freaking working it keeps asking for my card details

See step 2 under "Change your payment information on a Mac or PC":
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

How do you retain links within a page when converting from Microsoft word from a Mac?

Keeping Microsoft Word page links within a document or converting the filed map into bookmarks are not options when you work on a Mac. I subscribe to the Adobe Acrobat Plus service specifically to address that issue. But I can't find any documentation on this site that will walk one through the process. Can someone please direct me to a tutorial page that will allow me to keep my links and convert my bookmarks?

Have you tried using Safari's built-in method to email the content of a web page?
File > Mail Contents of This Page
(Keboard shortcut: Command-I)
If you don't want to email the entire page's content, you can easily edit it in the resulting email window, deleting the portions that you don't want.
Message was edited by: Rachel R

How do you re-edit a lens flare once it's been added?

I Added a lens flare but now I want to change some of the options for that particular lens flare. I clicked lens flare again but it just adds a new one. Is there an edit tool anywhere?
(the reason why I want to edit it is because it produced an after effect where black lines are propagating from an image on my canvas.)

From now on, always use an empty layer when applying an effect like a lens flare. That way, you can toggle the layer on/off as well as get rid of it altogether so you won't affect any other layer.

How do you clear the App download page once an App has been downloaded or updated?

Can anyone help?

You're welcome. That was something that changed with iOS7. Presumably it's meant as transparency for those that have automatic app updateing enabled, so you can always see what your device did while you weren't looking. But it applies across the board, whether you have the auto updating on or not.

How do you " properly " reply to Apple support once they've contacted you?

This sounds very minuscule ( I KNOW) , but I am pretty sure I am doing this correctly. I am having some issues with my iTunes and need tech support. I've emailed them and got a response from tech very swiftly, asking for specific information and screen shots. I did this...to respond, I just click on reply ( in my email account ; yahoo) and then continue inserting required info.
Now...l I've sent the response , only to get back a day later, an email stating pretty much this :
'Your message has been enqueued and undeliverable for 1 day'
to the following recipients:
Recipient address: [email protected]
Original address: [email protected]
Reason: unable to deliver this message after 1 day
Am I doing something wrong ?? Because I also received a 'follow up' email from support asking for the information they specified the first time they responded. Am I not doing something right here?
This is the other information from the email :
Sat, 27 Apr 2013 00:43:08 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Sat, 27 Apr 2013 00:24:01 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Sat, 27 Apr 2013 00:05:16 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:46:32 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:27:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 23:08:48 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:50:11 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:31:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 22:13:25 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:55:07 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:36:42 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:18:29 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 21:00:14 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:42:18 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:24:41 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 20:06:55 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:49:15 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:31:50 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
Fri, 26 Apr 2013 19:14:24 -0700 (PDT)
Shell exited with status 75 (Temporary failure)
The mail system will continue to try to deliver your message
for an additional 6 days.
Again, please help?

Contact Apple
http://www.apple.com/support/contact/
ApplCare: 1-800-275-2273

Having a hard time transferring photos from MacBook Pro once they have been cropped or colored enhanced to my iPhone or iPad. If they have not been manipulated then they transfer fine. How can I fix this?

I've been cropping and editing pics in my MacBook Pro but once I try to transfer them to the iPhone or iPad 2 only the photos that have not been manipulated transfer with no problems. How do I solve this problem?

Option 1:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
If that fails:
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair library permissions
Regards
TD

How can i make alerts still show up after they have been seen on lock screen notifications

On my old BB when an alert came up it would stay until I closed it or snooze or what ever. But mulitiple reminders would always be there until i decided what to do. Now on iphone
you might have 5 items on your lock screen but if you snooze or open one the others all are gone and never reminded again? Any advice?

Not a feature of iOS.

How to retain contacts once they have been erased

I was syncing ringtones to my dad's iphone and all of his contacts were erased. is there any way to get them back?

Restore from the backup if he didn't have the contacts anywhere else. If the contacts were synced with his computer, simply resync to the computer.

How do I remove photos from memory card after I have uploaded photos?

We have iPhoto 11. How do delete photos from a memory card after they have been uploaded in to iPhoto?
Thanks.

delete the iPhoto preference file
HOWEVER a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
If you continue letting the computer delete your photos you will lose them sooner or later
You pays your money and makes your choice - but you are playing a very risky game with no rewards
LN

In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

Similar Messages

Maybe you are looking for