In LR5.x can the exposure increments be changed in the develop module?

When developing RAW images the develop exposure increment is 0.1 which is a bit coarse. The actual field shows 2 decimal places but the last place does not change so I am wondering if the increment can be changed to 0.01? If so how?

Shift-Arrow up makes increments of 0,33 step. That's the only change I know of.

Similar Messages

  • How do I view two "different" images in the Develop module so I can match exposure ?

    Seems like a dumb question, but for the life of me cannot figure this out ?
    Thx

    I am not aware of any view mode in the Developer module that is similar to the Library module's Compare View mode. If the images you are trying to adjust were taken at the same time under similar lighting, you can select the settings of the image you adjusted and copy them to the other images. Select the image whose setting you want to copy and then click on the Copy button found in the bottom left side panel. This will display the Copy Settings panel. Insure the setting you want to copy are checked and any you don't want to copy are unchecked. Click the Copy button. Next, select one or more images you want to copy the setting to and click on the Paste button (bottom of left panel). The selected setting will be applied to the selected images. You can also perform a similar function when in the Library module but this time, look for the Synch Settings button found at the bottom of the right hand panel. Button names are changed but the dialog is essentially the same. Photos can be selected either in grid view or the film strip.

  • I purchased standalone LR5 in December 2014 and installed on home computer.  I have a mobile home with a 2nd laptop and installed       on this one also.  However, I now get a message saying that the Develop module is disabled and I need to renew membersh

    Can anyone help me understand why the Develop module on my 2nd laptop is disabled and asking me to renew membership to reactive.  I have a standalone LR5 which I purchased in December 2014 on the Windows platform.  My 2nd laptop is in a different location to my home laptop and is in my holiday home where I would like to work on my photos when I am away from home.

    thanks for replying.  I purchased online from Adobe and they sent a confirmation email with order number and serial no along with the instructions for downloading. There was no indication at purchase that renewing membership was needed at any time and it's only 3 months since purchase. I have just returned home from my holiday home and checked my home laptop (primary and first installation) and all modules still enabled !!  As far as I understand I am able to install twice as long as not operating both at once. This would be impossible as holiday home with laptop no 2 is 60 miles away. When I installed on no 2, i opened the order email and was able to use the serial no again. Now however it is greyed out. I don't want the cloud version and hope this is not what I have.
    UPDATE 1 April 2015-   I have checked the system info in Lightroom on my first laptop installation (home) and it is definitely a perpetual licence.  I downloaded what I thought was my 2nd allowed download on my holiday home laptop using the original email instructions and serial number.  I checked the system info on this download and it was it is a cloud version!!!!  This doesn't make sense - anyone out there - can I download to 2 laptops in 2 different locations with a perpetual licence??

  • LR5 - Selected image does not display in the Develop Module

    I recently upgraded to LR5 from LR4.1.   I have seen on several occasions where the selected image in the Develop Module does not appear.  I can move back to the LIbrary view and the image appears, but when I switch back to the Develop Module, the image disappears and only a black box appears (dark grey really).   This seems to happen after I have deleted flagged files using the ALT-Backspace shortcut.    This has happeded when  I deleted while in the Library and Develop Module, but does not happen every time.   I have disabled the "Show photo on Mouse Over" view option.  Prior to that, the preview window shows the selected or moused over photo. 
    The only thing I can do to get the develop module to work again is to restart Lightroom.  I've seen no other posts regarding this issue and it is very annoying when trying to go through 4000 photos!   I can find no place to report bugs, so I am posting this here.

    i found LR5 the most bug infested LR version ever.
    i "use" it only as test setup.
    real work i still do with LR 4.4.
    dav_miller wrote:
      How does this issue get reported to Adobe as a bug or is the fact that it is in the forum take care of that?
    nope.. in this forum you will only hear that this is not such a big issue and will be fixed soon.
    honestly im waiting for some bugs to be fixed since v3.6..... and i gave up on reporting new bugs to adobe.
    i just hope that some day they will be fixed.
    there is a text layer bug in photoshop i reported back in 2011 and that´s still in photoshop CC.....

  • Can you only increase expose by 2 stops in the develop module?

    Can you only increase expose by 2 stops in the develop module? IT seems you can make photos really bright in the Library module compare to the develop module.

    My develop module goes –5 to +5 steps on the exposure slider

  • In the develop-module there is  a menu-option "settings proof". What does it do? Can't find any in

    Can't find any information in the help on this topic. Can anybody clear this up for me?
    Saam

    Thnx Ian, I’ll go try it out
    Saam
    Van: Ian Lyons [email protected]
    Verzonden: dinsdag 27 maart 2012 18:44
    Aan: Saam de Mooij
    Onderwerp: In the develop-module there is  a menu-option "settings > proof". What does it do? Can't find any in
    Re: In the develop-module there is a menu-option "settings > proof". What does it do? Can't find any in
    created by Ian Lyons <http://forums.adobe.com/people/Ian+Lyons>  in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/4294793#4294793

  • Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

    Friends:
    Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom?  For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
    Thanks amigos
    Migs

    The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
    Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

  • I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

    I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

    Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
    Report back if that doesn't work.

  • I am working in the Develop module of Lightroom 5 and have accidentally bumped a setting and lost the Basic menu and the option to retrieve it.  "Tone curve" is directly under the tool bar now.  How can I retrieve the "Basic" menu?

    How can I retrieve the "Basic" menu on Lightroom 5?  I accidentally bumped something while working in the Develop module of Lightroom 5, and now the Tone Curve menu is directly under the Tool Bar, with no option to click on "Basic." 

    Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
    On Mac (Control-Click or Cmd+1)

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even

    I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even uninstalled my lightroom and reinstalled it with same issue.  Help!!!

    Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

  • Why can't I edit images in the develop module? It's telling me folders cannot be found.

    Why can I not edit images in the develop module? It is telling me that the source folders cannot be found.

    When I click on the RSS button, I got this
    message:
    "Safari can’t open the page “feed://wwwhome.cs.utwente.nl/~fiorezet/UT/Publications/rss.xml”. The error was: “unknown error” (NSURLErrorDomain:-1)
    Will need to look further into that one.
    I used the Feed Validator Website to check my RSS files. The Website says: "This feed does not validate". The site also shows in which lines the errors are. The link below shows what I mean:
    http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwwwhome.cs.utwente.nl%2F%257 Efiorezet%2FUT%2FHome%2Frss.xml
    What should I do to solve my problem?
    Regards,

  • ¿Don't you think that the Development Module in LR5 it's slower?

    Hi;
    Before state my question; I'm running on Intel i7 QUAD CORE @ 2.80 GHz (8 logical CPUs) and  16GB of memory,
    I feel that the Development Module in LR5 it is performing a lot slower that LR4. And the new CLONE TOOL sometimes freezes when you select a large area.

    others noticed this too:
    http://forums.adobe.com/thread/1230151?tstart=0
    seems like the "final" LR 5 goes the same way as LR4.
    wait until 5.4 and it will be usable....

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • My lightroom has updated to 5.5 and I now can't use the Develop module.

    My lightroom has updated to 5.5 and I now get the message "Develop module is disabled -please renew your membershipto reactivate the Develop module". My membership is ongoing so how do I resolve?

    Adobe made a help page for this problem because so many people have it:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • Why can't I use the Develop module?

    I bought the stand alone version of Lightroom so I would not have to subscribe monthly. Now it is not letting me use the "Develop" module. Please tell me I do not have to have a subscription after I bought the full program.

    I suspect that you did an update recently. In doing so, you have installed from the creative cloud. It is the same program, but it is licensed differently. It will be necessary for you to uninstall that version and then installed from one of these links:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1

Maybe you are looking for