In LSMW Customer master standard program.....
I have problem in LSMW customer master data creation.I have used LSMW standard program
object : 0050
method : 0000
prog.name : RFBIDE00
PROGTYPE : B
but upto Dispaly converted data all the steps are wrking fine..
but In the step13: Create batch input session, I am getting error message.
like "Editing was terminaterd"
kindly guide me on this..........
hi
chk this:
/message/3216495#3216495 [original link is broken]
regards,
madhumitha
Similar Messages
-
hi gurus,
i have tried lsmw with customer master using program RFBIDE00.
i went upto step convert read data.
my problem is
when i read data it shows all fields correctly filled. but after converting data it is not showing
the correct fields and mapping data correctly.
and more over in converted data it won't show structure name in left side coloumn.
thanks and regards,
dharani kumarHi Dharani,
First check ur Maintain source fields (the way(order) ur defined here , in the same way u have to take in the flate file(its not mandatory to take in the same way(y iam telling means mostly we get confusion(if we are not aware of lsmw) ),
and also check the length and character type (all fields should be Character type c) and length is not less than Data dictionary length).
and after that check ur mapping step , have u done proper mapping r not .
if everything is done perfectly , and also issue is not resolved , just have a ping.
Reward points if helpful.
Thanks -
I am getting the following error in LSMW customer master master load in LSMW for only some of the records.
Field KNVV-WAERS. does not exist in the screen SAPMF02D 0310
Any one now the solutionHi
Make sure you have mention the Currency in your screen or data. -
LSMW : Customer Master upload
hello,
i am uploading customer master data using the standard object : 0050 and program : RFBIDE00.
I am trying to upload data like Street2, street3 and street 4 which can be viewed in the street address drop down in transacction XD01/02. In my lsmw i am using the mapping for these fields in the structure BIADDR2 where the fields i mapped to are str_suppl1, str_suppl2, str_suppl3.
but when i try and upload data i do not get these fields updated even though i have given them in the upload file.
Please can anyone tell me the reason why it is doing so?
Thanks and Regards
SwanandHi Swanand,
We have done the customer master upload using LSMW but with the IDoc variant (message type DEBMAS). You can upload all data you need using this IDoc.
Regards,
John. -
Hi!
We are trying to load a Customer Master file from a flat file using LSMW and Data Transfer Workbench to load the address data in BAS (since we need to access some extra fields like email address). The problem is that LSMW also creates a new address in BAS so how do we associate the address created by Data Transfer Workbench to KNA1? Do I need an ABAP program and functions ADDR_ADOWNERREF_READ and ADDR_ADOWNERREF_DELETE? Do I then just write over the value in the KNA1-ADRNR field with the value created by Data Transfer Workbench? Can this be done automatically using LSMW?
Thanks,
Tony.Hi Tony,
I know you have posted this a long time ago but were you able to figure this out?
If you were, can you please help me with this.
Thanks,
Kevin -
Customer Statement (Standard Program and Scripts)
Hi All ABAPers,
Can anyone tell me the standard programs and their tcodes used for Customer statement with the smartform and sap script names?Custom statement Prog Name: RFKORD11
Script name: F140_CUS_STAT_01 & F140_CUS_STAT_02
Statements would be printed via FBL5N.
Edited by: Alexander on Jul 1, 2009 12:00 PM -
Dear Gurus,
I am trying to update customer master data through LSMW. I am following through the 14 steps- "Batch input recording". I create a TAB delimited file excel and store it to the local drive C:\. When i try to read data i am not able to read as it says "Error when uploading file 'C:\XD02.txt' (Return Code = 13).". Could you help resolve the issue. thanks in advance.
Best Regards
RajiDear Raji,
There are two possibilities:
1. You upload the file from presentation server to application server and use the same for processing with background.
2. You can use Fore Ground process with presentation server.
The reason is that you cannot access the presentation server for background processes. It is typically carried out in application server.
Regards,
Naveen. -
Hi,
I´m using standard batch input object 0050 (customer master) to upload customers to the system.
I now have the problem, that it´s working in foreground, but not in background. In foreground, I´m
getting a warning, that the field KNA1-BRSCH does not exist on screen SAPMF02D 0120. As I have
seen, the field comes on the next screen, and when I press enter, it´s filling that field there. So in the
end, I can run the batch input in foreground.
But in background it´s always stopping because of this message. But as it is standard batch input,
it shouldn´t come up, right?
Does anybody have an advice for me, what to do?
Is it possible to let the batch input session run in a state, that it ignores warnings and just stop at
errors?
Thank you for your help!The field was suppressed by customizing, and because of that, the error occured...
-
LSMW Customer Master LSMW Error in program RFBIDE00
Hi,
I regenerated program RFBIDE00 using RFBIDEG0.
After generation i'm getting short dump while executing RFBIDE00. short dump is as below,
"The data object "BKNB1" does not have a component called "QLAND"."
i checked and found that structure BKNB1, does not have this field. I'm now not able to revert back the program to earlier version as well.
If anyone has come across the same error, could you please share the solutions.
Thanks,
RaghavendraCheck via SNOTE is this note was (or is being) implemented by somenone else (). It was, else regeneration of the program would not have inserted a line with this field (*) and it was not implemented via Support package, else the field QLAND would be in structure BKNB1. Perhaps the note is not yet "fully implemented" nor transported in Qal. and Prd. systems.
If you are or have been in an Upgrade Project, you can also look at SPDD and SPAU on the same objects (structure BKNB1 and source program RFBIDF00)
Regards,
Raymond
(*) Call SNOTE, then click on landscape icon (or menu:goto, SAP Note Browser) and select note 1433345.
(**) Look at include RFBIDF00, FORM BKNB1_ERWEITERUNG_PRUEFEN, for code like
*------- withholding tax country
IF BKNB1-QLAND(1) NE NODATA. "HD 1433345
*------- BKNB1-Erweiterung zu 4.70: -
Hi, im using the LSMW migration system to create the customers. Im using the standard Direct Input (Obj:0050 Meth:0000) method and i have this problem: i need to load the Dunning data from the table KNB5, but, for one customer i have more than one entries. The dunning data it`s loaded in a table control in one of the Company Data tabs. You reach that table control by pressing the button: Dunning Data. How can i load the multiple records of the table KNB5 so the Direct Input can fill this table controll? For the relations of the structures i have this:
BGR00 -> ZBGR00
BKN00 -> ZBKN00
BKNA1 -> ZBKNA1
BKNB1 -> ZBKNB1
BKNB5 -> ZBKNB5
And the input file has this format:
0 Data for ZBGR00
1 Data for ZBKN00
2 Data for ZBKNA1
3 Data for ZBKNB1
4 Data for ZBKNB5
Im using a unique file for all the structures. The problem it`s that i can`t have more that one ZBKNB5 reg (ID: 4), like this:
0 Data for ZBGR00
1 Data for ZBKN00
2 Data for ZBKNA1
3 Data for ZBKNB1
4 Data for ZBKNB5 Reg1
4 Data for ZBKNB5 Reg2
4 Data for ZBKNB5 Reg3
So, how can i load the Dunning Data table control if all the structures are at the same level?
Later i try to use the IDOC standard method to create the customers, and this method provides me with a more adequate structure heritage, because the BKNB5 structure it`s subordinated to the BKNB1 structure, so this allows me to have more than one KNB5 register. I run the IDOC and creates the customer fine, but the Dunning Data table controll still empty, even i had all the data in the KBNB5 structure on the LSMW system.
Can someone please help me with this?? Thanks!!. And sorry for my bad english. Im from Argentina.hi ,
just record the entire customer record using SHDB and u can find all the fields , thts the easiest way according to me .
regards,
dinesh . -
LSMW Customer Master text load- screen to small
Hello!
I am loading customer texts via LSMW.
Some of the texts are very long (up to 29 paragraphs/lines), though during LSMW batch run, the screen shows only 20 paragraphs/lines, so 21 onwards are not loaded...
How to expand the quantity of lines so it is eg 30 on the screen?
Thanks!
Cheers
BeaHi,
You can try to increase the resolution of your screen and make the screen to look smaller.
Or you can try to use FM 'SPLIT_TEXTLINE' to split those text which cant upload to your master data.
Thanks. -
Dear Gurus,
I uploaded 3 weeks ago some 1500 customers into the system. My client is sending me another 3 files containing about 110 customers and wants me to check if there are any duplicated between the customers already existing into the system and theses other 110.
How can I check this?
Thank you for your help
ChrisDear Chirs,
The said conparision cannot be done inside the SAP system. Because while create Customers with same name / Address the system just givens a warning message (provided requires settigns have been done).
Thus any such conparisions would have to be done only in Excel. Use SE16N & access table KNA1. Download the Customer Code & Name details to Excel & run Voookup to match & check for duplicate records...
Hope this helps...
Thanks,
Jignesh Mehta -
Cust master,Vendor master standard LSMW prog name?
Can anyone send LSMW Customer master,vendor master standard programs name?
Hi,
You can select the <b>program/object name</b> from the <b>Maintain object List</b> only.
Go thru these links for detail LSMW.
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Reward points if this helps.
Manish -
Customer master conversion uing lsmw tool
hi folks,
iam using lsmw customer master conversion ,i facing an issue the subroutine i wrote , accoring the company standards what ever i write subroutine will reflect all the objects in that the particular project i write and leads to dump ,now i should a subrotine in project such that it doesnt reflect all other objects in that project , i should write globally so can any one tell the syntax how i should write subroutine that doesnt reflect others.answered
-
LSMW-standard program RFBIBL00-two withholding information lines
Hi,
I am using a LSMW with the standard program RFBIBL00. The structure is BKPF , BSEG and WITH. I have a field for each one.
The problem is when I try to upload 2 lines for vendors in the same document which have withholdong information i cannot set in the WITH field and structure which withholding information is for each line.
Any idea or in this case I don't have other option than upload each line in different document?
Thanks,
Ceciliahi zarina,
please send me the documents to my mail also
([email protected]),, waiting for your mail
thanks in advance ,,
krishna
Message was edited by:
Krishna Ramasamy
Maybe you are looking for
-
I would like to use my iCloud email address as the username. Is this possible?
-
Price Change in iTunesconnect doesn't show up in the library. why?
Hello, We are to have a app price discount event in a limited time. (Like 5 days) Our current app's price is 2.99 USD, tier3. Target price is 1.99. There was no problem changing price in itunesconnect. ( I already asked iTunes about this problem. it
-
ICal - AppleScript To Convert ToDos To Events
I use a iMac G4 800MHz 15" running 10.4.11. I have used Chronos Personal Organizer 4.5.0 for quite some time. I want to transfer my approximately 21,000 CPO calendar items (all are To Dos) to iCal. This number includes approximately 5,000 items that
-
How can I get Snow Leopard installation from Greece?
Hi all, I have a Macbook 4.1 13"inch (2008) currently running OS X 10.5. I want to upgrade to Snow Leopard but the problem is that I cannot find anywhere in Greece to buy the installation disk. There is no greek Apple store, the rest of Apple stores
-
Partitioning External Drive w/o Erasing Data
I have one 500GB external drive (USB) that I want to partition. I have 85GB on data on it now and really don't want to copy it back to the Mac HD (if at all possible). When I run Disk Utility/Partition and select 2 partitions, it allows me to shrink