In LSMW does SAPLAIST 1000 not record all information

Hi, I am doing a LSMW recording using TA AS91. For some reasons I can't figure out is the recording incomplete!
I would like to set the Ordinary Dep.start date! I key it in when recording TA AS91 but it's missing in the recording.
SAPLAIST 1000
    BDC_OKCODE                     =ALTD
    BDC_SUBSCR                     SAPLAIST
    BDC_SUBSCR                     SAPLATAB
    BDC_SUBSCR                     SAPLATAB
    BDC_SUBSCR                     SAPLAIST
    BDC_CURSOR                     ANLB-AFASL(04)
    ANLB-AFASL(01)                 xstl                 AFASL_01             Depreciation key
    ANLB-AFASL(03)                 ylix                 AFASL_03             Depreciation key
    ANLB-AFASL(04)                 xehy                 AFASL_04             Depreciation key
    ANLB-NDPER(01)                   0                  NDPER_01             Planned useful life in periods
    ANLB-NDPER(03)                   0                  NDPER_03             Planned useful life in periods
    ANLB-NDPER(04)                   0                  NDPER_04             Planned useful life in periods
I would expect these fields to be inclued.
ANLB-NDJAR(01), ANLB-NDJAR(03), ANLB-NDJAR(04), ANLB-AFABG(01),ANLB-AFABG(03) and ANLB-AFABG(04)!
Any clues? Can I manually add these fields?
/René

When you are recording you have to fill in all the values. Even when it is aready filled in the screen.
When 10 overwrite it with 10 and it is in
to insert fileds you can do on the following way:
Click on the place where you want to insert on the right mous button
Use the option add screenfield (extended)

Similar Messages

Captivate will not record ALL screen movements

I have been using Camtashia and recently move to another
company where they want to start using Captivate. I just bought
Captiveate and I am getting very aggrevated! Captivate will not
record all my movements with the mouse or when a screen changes. It
appears that everything is driven by an actual mouse click. Only
when I move my mouse around and then click will it actuall record
the "action".
Please tell me there is a way for Captivate to record all
mouse movements, keystrokes, changes in applications just as I see
it when I am actually doing the recording.
I dont need all this fancy highlighting and project wizards,
I just simply want Captivate to record EXACTLY what I do and see
while I am recording.
PLEASE HELP!

Hi Tmy8ster and welcome to our community
No doubt you are frustrated if you are expecting Captivate to
behave like Camtasia. Yes, both create similar output, but both
accomplish it in entirely different ways.
Perhaps the following link to a thread where I attempted to
explain it will help:
Click
here to read the thread
Cheers... Rick

Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough space available.

Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.

The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
80Gb10 = 74.3Gb2
It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
tt2

CCX / WFO Not Recording All Users

I've setup CCX and WFO in a lab to test compliance recording. My lab consists of the following:
- CCX 8.5.1
- WFO 8.5.2
- 3 AD users with device profiles (agent1, agent2 and agent3)
- 1 laptop with CIPC configured for network recording
When I login agent2, calls are recorded. I've verified this by logging into the WFO webpage and playing back the recordings.
When I login either agen1 or agent3, calls are not recorded. The WFO CTI logs show the error '
Not enough active connections. Not qualified.' Below are the complete CTI logs.
2013-03-26 04:55:05,123 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#isInterestingJtapiEvent:112] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: 16791936 [CallActiveEv] <128>
2013-03-26 04:55:05,125 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#handlePassive:144] Active event (TermConnActiveEv SEPA088B41981E0) sent for local terminal (SEPA088B41981E0). Setting connection 24229920 to active state for callid 16791936
2013-03-26 04:55:05,125 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[23,366,1]ConnectionId=24229920;AssocCallId=291160144755072;EvId=23;EvName=BEGIN_CALL;CallingAddress=212;MAC=SEPA088B41981E0;Line=212;Timestamp=1364298905;CalledAddress=Unknown;CallId=16791936;<
2013-03-26 04:55:05,125 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#handlePassive:149] Talking event (CallCtlTermConnTalkingEv SEPA088B41981E0) sent for local terminal (SEPA088B41981E0). Setting connection 24229920 to active state for callid 16791936
2013-03-26 04:55:05,126 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#isInterestingJtapiEvent:112] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: 16791936 [CallCtlTermConnTalkingEv SEPA088B41981E0] <128>
2013-03-26 04:55:05,126 DEBUG [(P1-10.10.10.30) EventThread|CallTalkingQualifier#isQualified:83] Not enough active connections. Not qualified.
2013-03-26 04:55:10,128 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#isInterestingJtapiEvent:112] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: 16791936 [CallCtlConnEstablishedEv] <129>
2013-03-26 04:55:10,128 DEBUG [(P1-10.10.10.30) EventThread|CallEstablishedQualifier#isQualified:83] Not enough active connections. Not qualified.
2013-03-26 04:55:11,613 DEBUG [(P1-10.10.10.30) EventThread|AgentObserverImpl#terminalChangedEvent:268] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: [CiscoRTPOutputStartedEv] <136>
2013-03-26 04:55:11,614 DEBUG [Outgoing#5|AgentObserver#sendFakeEstablishedEvent:534] Sending fake established event for call id: 16791936
2013-03-26 04:55:11,614 DEBUG [Outgoing#5|AgentObserver#sendFakeDirectionalEvent:513] Sending fake directional event for call id: 16791936
2013-03-26 04:55:11,614 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[15,376,1]ConnectionId=24229920;AssocCallId=291160144755072;EvId=15;EvName=CALL_ORIGINATED;CallingAddress=212;MAC=SEPA088B41981E0;Line=212;Timestamp=1364298911;CalledAddress=Unknown;CallId=16791936;<
2013-03-26 04:55:11,615 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[10,378,1]ConnectionId=24229920;AssocCallId=291160144755072;EvId=10;EvName=CALL_ESTABLISHED;CallingAddress=212;MAC=SEPA088B41981E0;Line=212;CallId=16791936;CalledAddress=Unknown;Timestamp=1364298911;<
2013-03-26 04:55:11,615 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[31,476,1]ConnectionId=24229920;EvId=31;EvName=RTP_OUTPUT_START;PacketSize=20;Timestamp=1364298911;AssocCallId=291160144755072;PayloadType=G711ULAW64K;MAC=SEPA088B41981E0;Line=212;CallId=16791936;RemotePort=25044;Silence=false;RemoteIP=10.10.10.30;<
2013-03-26 04:55:11,653 DEBUG [(P1-10.10.10.30) EventThread|AgentObserverImpl#terminalChangedEvent:268] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: [CiscoRTPInputStartedEv] <136>
2013-03-26 04:55:11,654 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[30,444,1]ConnectionId=24229920;AssocCallId=291160144755072;EvId=30;EvName=RTP_INPUT_START;LocalIP=10.10.10.126;LocalPort=24598;PacketSize=20;MAC=SEPA088B41981E0;PayloadType=G711ULAW64K;Line=212;Timestamp=1364298911;CallId=16791936;<
2013-03-26 04:55:17,433 DEBUG [(P1-10.10.10.30) EventThread|Prequalifier#isInterestingJtapiEvent:112] Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required] JTAPI: 16791936 [CallCtlConnEstablishedEv] <129>
2013-03-26 04:55:17,433 DEBUG [Outgoing#5|AgentObserver#writeEvent:841] EVT: Sending to <Agent[type=Network,dev=SEPA088B41981E0,ip=10.10.10.58,id=1.User login required]>: Head[10,384,1]ConnectionId=24229920;AssocCallId=291160144755072;EvId=10;EvName=CALL_ESTABLISHED;CallingAddress=212;MAC=SEPA088B41981E0;Line=212;Timestamp=1364298917;CalledAddress=7173646217;CallId=16791936;<
Any thoughts?
- Robb

Resolved... Apparently you need to add the physical phones and the device profiles as recording devices. The documentation is somewhat lacking in this regard. Anyway, hopefully this helps someone else.

Outlook contact not added Email do not show all information i Lync 2013 Client

I have seen if no Email address is added into contact personen I only get emty Card of user i Lync 2013.
When I add Email adr. into contact person and wait a littel then user get all information right i Lync 2013 user Card.
IS this right or should it also showing user and all information from Outlook contact Card into lync 2013 client Card?

Lync aggregates contact data from Microsoft Exchange GAL, Outlook and Microsoft Lync Server.
So you can see information from outlook in Lync user card.
Lisa Zheng
TechNet Community Support

Has anyone else noticed that iBooks search does not find all information that should be located for a specific search criteria?

I am converting a novel to ePub format. I am currently in the process of adding "end notes" to the book. Each will have a flag embedded at the proper spot in the various chapters that is coded as "[See End Note xx]" where xx is a one or two digit number. Each of the flags has those words surrounded by the HTML that links the flag to the proper end note at the back of the book.
To verify that I have indeed inserted correctly each end note, I copy the book's epub file from my desktop PC to the iPad. I then do a search in iBooks to locate each occurance of "[See End Note" or just "End Note". I should see each of these flags listed. Last night it would list all of them except "[See End Note 28]"! If I did a search for "28", it would appear.
I then copied just the flag itself ("[See End Note 28]") without the associated linkage HTML to the back of the document, and placed the copy just in front of the paragraph that contains it. Neither of the two flags were found.
I then duplicated just the flags for end notes 27 and 29 which the search function had located. I placed the copies surrounding the copied flag for 29. The result was as follows in the text of the book:
[See End Note 27]
[See End Note 28]
[See End Note 29]
Although 27 and 29 were still being shown in their normal places, none of the above three inserted (test) flags was displayed by the search!
It seemed that the iBooks search goes through part of the book, but cannot take the whole book in one piece. It then continues, but leaves a gap that is not scanned per the search criteria. To test that theory, I removed the entire text of several chapters that did not contain any end notes. I then loaded this modified copy of the book into the iPad. When I ran a search using "End Note", all of the flags (including the special test flags) were displayed. The list included the "missing" "[See End Note 28]" that cannot be found if the all of the chapters have their text!
I shall be calling Apple in a few minutes to again attempt to get the apparent "bug" (aka design or coding flaw) removed such that it does not
impact the ability of the iPad to be a useful tool.

Not all movie studio signed up to the agreement with Apple to allow redownloading of movies, only those that did will have their movies available in the purchased section of iTunes.

Does iOS 7 not have "All Songs" anymore?

Hey iOS 7 users.
I have an iPod Touch 4th generation, which means I can't get iOS 7. I'm thinking about getting the 5th generation and adding iOS 7. Can you please see if iOS 7 has "All songs" in the genre tap? Meaning you can play all the songs by one specfic genre. If you still don't get what I'm talking about, please watch the video.
http://www.youtube.com/watch?v=ZPPObIYi_Kc

No, it does not. I have the fifth generation and iOS 7.0.3. Sorry.

My I message ain't working, it does sometimes then not at all

My iMessage works sometimes then doesn't it just sends a normal text message

You must be connected to a data source for iMessage to work, either 3G or WiFi, as does the person you're trying to use iMessage with. If not, iMessage will default to SMS if that is enabled in settings.

Does Cmd+H not hide all applications in Yosemite?

When I press Cmd+H to hide each open app, it works as expected until I get to the last visible app. Instead of the last app being hidden and showing my desktop, pressing Cmd+H will either toggle (hide/unhide) between the last two apps, or not hide the last app at all.
Is anyone else seeing this behavior? Is it possible to restore the Mavericks behavior where I can simply hide all the apps to eventually see the desktop? (Note - this is different than Mission Control's Show Desktop)
Thanks in advance for any info!

found this link a helpful workaround! (hint: use Option key when selecting apps and it closes them off desktop so you're left only with the one app window you want - not all of them)
http://discussions.apple.com/thread.jspa?messageID=3517319&#3517319

MB1C via LSMW for Serialized Materials not loading all Items

Dear Experts,
I am using LSMW to load initial entry of materials with serial numbers using Tcode MB1C. The challenge i am having is that not more than three(3) of the serials get uploaded the remaining are not loaded. I have items that have varying quantities. What could be responsible for this?

Hi,
Insted of LSMW make a abap program using 'BAPI_GOODSMVT_CREATE' it is simple and works properly.
regards,
zafar

Why does my CD not show all files?

I have a CD-R that I burned on my old G3 of art files--tifs, jpgs, epss etc. There are also a couple of other folders containing logos and graphic files whose contents show up fine, but all the art files (a bunch of folders categorizing contents) do not show up in the window. I can access them if I use the search function ONLY! What gives? Why can't I view the directory of this CD?

In the view window of the CD-R contents, if you change that from Icon view to
one of the other views, can you see a list of contents in the disc? That is how
you normally can see the items in columns or lists.
There is a chance something may be amiss on the actual CD-R media, if it
has some strategic smudge or a few scratches, that could also affect how
the disc is read in a different computer at some later point in time.
Also, some optical drives may use a slightly different format, and while it should
not be a problem among Macs, if the format or disc type is not fully supported,
the content may appear missing.
Good luck & happy computing!

Why does "Print Booklet" not print all the files in book?

My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2. When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11. Your ideas and help will be greatly appreciated..........Richard

Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that.

Xml not parsing all information

I have been trying to do a search on this topic, but I am
getting hit with an error, so I am creating a new topic. If the
answer already exist, please point me to the link, if not, please I
hope that someone can answer me.
This issue that I am having is that I have created this
gallery -
http://www.sothebys.com/images/home/flash/doha/index3.html
- and everything seems great. However, when you first come to the
page, underneath the caption you'll see "orientalist/1rousseau.swf"
and "orientalist/2belucci.swf". I want to see this. Now if you
click on any of the thumbnails, they disappear.
In the XML file -
http://www.sothebys.com/images/home/flash/doha/orientalist.xml,
these values appear in engAudio and arabicAudio tags.
May someone let me know why the values are disappearing from
my page and how I can bring it back? Am I missing something?
FYI, I am using Spry 1.6.
Thanks for your time and patience.

I have been trying to do a search on this topic, but I am
getting hit with an error, so I am creating a new topic. If the
answer already exist, please point me to the link, if not, please I
hope that someone can answer me.
This issue that I am having is that I have created this
gallery -
http://www.sothebys.com/images/home/flash/doha/index3.html
- and everything seems great. However, when you first come to the
page, underneath the caption you'll see "orientalist/1rousseau.swf"
and "orientalist/2belucci.swf". I want to see this. Now if you
click on any of the thumbnails, they disappear.
In the XML file -
http://www.sothebys.com/images/home/flash/doha/orientalist.xml,
these values appear in engAudio and arabicAudio tags.
May someone let me know why the values are disappearing from
my page and how I can bring it back? Am I missing something?
FYI, I am using Spry 1.6.
Thanks for your time and patience.

DVD and CD not burning all information

Please help... My imac has begun to drop files during burning. When the burn is complete some folders are fully burnt, while other folders have some of their contents missing???? Am I doing something wrong, or is my G5 going CucKoo?I use the finder to burn my discs which are made up of mostly digital pics, adobe files etc. Use either verbatim dvd -r or sony cd-r. Would like to use 1 large capacity dvd to archive my files every few months. Maybe I'll just stuff the lacie til it's full instead. Thanks

This may sound super-basic--but before starting a burn, I would check and make sure you aren't trying to stuff too much data onto one disc. Don't forget (and forgive me if you have already thought of this) that the Finder often calculates file sizes and disc capacities differently from disc manufacturers. You've probably noticed how the advertised size of HD's differs from the actual usable size; DVD's and CD's are no different.
You could also try using different disc burning programs (Disc Utility, Toast, iPhoto, etc) or borrowing an external burner and seeing if that makes a difference.

Why does this site not provide identity information on any page.how do i know if the site i am on is secure. did not hve this problem before upgradingg

The button is always grey on mozilla/google . How can Ipossibly know if any of the sites on the page Iam searching are secure. I used to see a green tick but this no longer happens. Think I may well have to change my browser

https://support.mozilla.com/en-US/kb/Site+Identity+Button

In LSMW does SAPLAIST 1000 not record all information

Similar Messages

Maybe you are looking for