In Mac OS X Yosemite, Finder / Favorites / All My Files, "Today" files are not displayed.

After upgrading MacBook Pro to OS X Yosemite, "Today" files are not displayed in Finder / Favorites / All My Files. It worked prior to the upgrade.

After further investigation, it is not the displaying of "Today" files that is the issue. It appears that Finder / Favorites / All My Files is not correctly finding & displaying files when using the View / Arrange By / Date Last Opened criteria. If I switch the criteria to / Date Modified, it finds & displays the file correctly. See attached screen shots. (It is possible that this problem existed before Yosemite, as I don't recall which criteria Finder was using before the upgrade.)

Similar Messages

All events in one calendar are not displayed

I have two gcalendars. On my iphone I have caldev set to sync both calendars to ical on the iphone. On one of the calendars, *some but not all* of the events do not display. I tried doing a search and they don't display. I verified that I was looking at the correct year for the date that they should display.
The missing events display normally if I go to Gcal on my desktop computer, and with the iphone using the web version of gcal.
Why would events show up on Gcal web but not all of those events via Gcal caldav?
Message was edited by: rick wintomac

Yes. I tried changing the setting to Sync All Events (instead of the time limited sync) and let it refresh. No change. No display
I also tried rescheduling the event by one hour on the same day (no other changes), then save. No change. No display.
I ended up deleting the events and re-entering them, with identical information (including the recurring end date, remarks, etc., you name it), and then the events appeared like the rest of them in the same calendar.
I'd still like to know if there is a solution to the original problem. I'm still concerned that other events, maybe in the other calendar as well, are no appearing and it's impossible to rely on a sample or to verify every event.
Thanks for your assistance.

I am using Firefox 23.1 all of a sudden images are not displayed, I have started in safe mode, installed a new version and nothing help

I have tried everything from re-installing FF 32.1
restarting is safe mode
re-examined all extensions to see if any could be cause it and disabled some and nothing.
I will NOT go higher than 23 as I have many more problems when I was in those
I have a mac. ...10.8.5

If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu Bar
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick?

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
Background / other symptoms:
The Flash drive in question has been formatted HFS.
I get no error messages, including on the Console, and no sound indicators.
I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
Finder copying on this stick works just fine on my other Mac.
I can move files within another (FAT32-formatted) USB flash drive.
The quirky USB HFS Flash drive works fine on my other Mac.
Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

Find out all SAP Standard Objects which are Modify

Hi
How can i find out all SAP Standard Objects which are Modify?
Regards
Vikram

Hi,
You can find all SAP objects list via t-code SWO2, as to these objects, if you want to change anyone of them, you should apply an access key in advance from http://service.sap.com, otherwise you can not modify any object in SAP system.
Good luck
Z.T

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

I have set up my iPhone to wifi sync with iTunes on my Mac Air, but my iPhone's contacts are not displaying in Contacts on my Mac...any ideas?

I have set up my iPhone to wifi sync with iTunes on my Mac Air, but my iPhone's contacts are not displaying in Contacts on my Mac...any ideas?

Hi there kushfromgbr,
You may find the information in the article below helpful.
About SyncServices
http://support.apple.com/kb/HT5847
OS X Mavericks
OS X Mavericks v10.9 and later do not use SyncServices. Instead, Mavericks supports sharing your information using several network-based and cloud-based solutions. If you want to sync your information across multiple devices and computers, you should use one or more of these methods. These include iCloud, CardDAV servers, CalDAV servers, and servers that utilize the Exchange ActiveSync protocol.
If you would like more information about setting up iCloud on your devices you can take a look at the article below.
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
-Griff W.

HT201363 my rescue me email is no longer active. trying to get a call scheduled but it says all the numbers i enter are not valid.....help!!

my rescue me email is no longer active. trying to get a call scheduled but it says all the numbers i enter are not valid.....help!!

Hi aj_russ,
As long as you still have access to your Apple ID account, you should be able to change or edit the Rescue email address associated with your security questions. You may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

All values in internal table are not displaing in the script print program

Hi,
I am calling the script program.In main window all values in the internal table are not displaying. I wrote
write-form statement in loop. But not all the values are getting displayed. Only thel ast values getting dispalyed.
*& Report ZSCRIPT_116719
REPORT ZSCRIPT_116719.
************Table decleration***************
TABLES: mara, mbew, makt.
loop at i_makt into wa_makt.
endloop.
loop at i_MARA into wa_mara.
endloop.
LOOP AT I_MBEW INTO WA_MBEW.
ENDLOOP.
lv_price = 0.
********************Total Price******************
LOOP AT i_mbew INTO wa_mbew.
 lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
end-of-selection.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
 FORM = 'ZSCRIPT_719'
 LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
 CANCELED = 1
 DEVICE = 2
 FORM = 3
 OPTIONS = 4
 UNCLOSED = 5
 MAIL_OPTIONS = 6
 ARCHIVE_ERROR = 7
 INVALID_FAX_NUMBER = 8
 MORE_PARAMS_NEEDED_IN_BATCH = 9
 SPOOL_ERROR = 10
 CODEPAGE = 11
 OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
 FORM = 'ZSCRIPT_719'
 LANGUAGE = SY-LANGU
STARTPAGE = ' '
 PROGRAM = 'ZSCRIPT_116719'
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
CODEPAGE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'DATA'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
 ELEMENT = 1
 FUNCTION = 2
 TYPE = 3
 UNOPENED = 4
 UNSTARTED = 5
 WINDOW = 6
 BAD_PAGEFORMAT_FOR_PRINT = 7
 SPOOL_ERROR = 8
 CODEPAGE = 9
 OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDLOOP.
If I give only one value it is showing the output. When I am fetching the data for range of values it i sshowing start_form is not there.
Plz let me know how to get the aa internal table values to be displayed

hi
I shortened your program a bit. So we can go to essentials of your question.
You said you put in it in a loop.
What i see in your prog is:
REPORT zscript_116719.
************table decleration***************
TABLES: mara, mbew, makt.
LOOP AT i_makt INTO wa_makt.
ENDLOOP.
LOOP AT i_mara INTO wa_mara.
ENDLOOP.
LOOP AT i_mbew INTO wa_mbew.
ENDLOOP.
lv_price = 0.
********************total price******************
LOOP AT i_mbew INTO wa_mbew.
lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'OPEN_FORM'
 EXPORTING
 form = 'ZSCRIPT_719'
 language = sy-langu.
CALL FUNCTION 'START_FORM'
 EXPORTING
 form = 'ZSCRIPT_719'
 language = sy-langu
 program = 'ZSCRIPT_116719'.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'DATA'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'.
*endloop.
1. Your loop is not a loop with this '*' in front of it.
2. Are you printing &wa_mbew-???& variables in your sap-script
3. is itab I_MBEW properly filled
Let me know.
Gr. Frank

Our Windows PC crashed with all our music on it. There are copies of both purchased (thru iTunes store) and from our own CDs on another HD in a backup file. They are not linked to a Media file. Is there any way I can put this music on my new computer?

Our Windows PC crashed with all our music on it. There are copies of both purchased (thru iTunes store) and from our own CDs on an external HD in a backup file. They are not linked to a Media file. Is there any way I can put this music on my new computer?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

My pc crashed and I lost all my pictures and music that was stored on the pc. Now i have a new pc and when i connect to itunes using my password all my music and photos are not available. they appear to be lost.

my pc crashed and i lost all my pictures and music that was stored on the pc. now i have a new pc and when i log into itunes all my music and photos are not available. I guess i dont understand the pupose of itunes and its worth. I thought it backed up all my photos and music, but apparently not. So what do I use so that when i lose data on my pc i can retrieve it again at a later date or after a crash?/

Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync.

HT1766 how do I back up my iphone. I am on my itune and I have a new I phone and have transfered the all contacts but my apps are not transferrring?

how do I back up my iphone. I am on my itunes and I have a new I phone and have transfered the all contacts but my apps are not transferrring?

Configuration.

In Mac OS X Yosemite, Finder / Favorites / All My Files, "Today" files are not displayed.

Similar Messages

Maybe you are looking for