In mail, bottom of screen used to show whatever message was higlighted, now i have to double click
in mail, my inbox screen was split, with the messages in the top portion ( from: subject: date received: mailbox) & the info from the highlighted mesage in the bottom portion.
Currently I've "lost" the split screen and must double clikc the message which then opens a new window to read, forward etc.
How do I get the origional display back?
once I posted this question, I looked to the right of the support screen & saw the MORE LIKE THIS box with suggestions of like questions.
"go to the bottom of the mail window, you should see a line, at the middle of this line you should see a dot, drag that drop to about the middle of the window and drop it, you will then have the preview pane for previewing emails at your disposal. move that line anywhere you want depending on how you would like the layout to appear.
hope this helps"
Similar Messages
-
I have always single clicked to open mail. Now I have to double click. I have not touched preferences or made changes. Any suggestions?
From where are you launching Mail? The only place, unless I've missed or forgotten something, you can launch an application with a single click is from the Dock. Is this what you're doing, or are you attempting to launch Mail from the Applications folder?
Regards. -
The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.
If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
My home screen usually displays 4 columns of apps. Now, all of a sudden, it started showing 3 columns of enlarged apps. How do I revert to the 4 columns of apps in normal size?
Hi,
Try resetting your iPod: Press/hold the home and sleep/wake buttons until the Apple logo appears.
Hope this helps!
---likeabird--- -
My mail icon keeps showing 1 message, but I don't have a message.
My mail Icon on my Iphone keeps showing 1 message, but I don't have any messages.
How do I make it stop?
Thanks!I have one regular email account and one account that I use to collect text messages from friends with two-way pagers. I have checked all inboxes and they are empty. I have rebooted. I have deleted and recreated the account and when it reappears (the text account) it shows 3 messages but the inbox is empty. I fiqure this has something to do with it being an "[email protected]" account but I have been using it this way for a while and this is the first time I have these ghost messages
-
I just got another iphone, new sim same number same account, my messeges use to show on my mac, but now they dont and i already logged in to icloud from the mac and still nothinG, i use to be able to recieve my imesseges including none iphone messeges on my mac that were sent to my phone and now since i got another iphone i dont anymore.. How can i fix this agian??
Hi Victoriahernandez10,
Sorry to hear you are having issues with your new iPhone. If you are having issues receiving iMessage messages across your iPhone and your Mac, you may want to double-check that your phone number and your Apple ID are correctly linked and that all your contact addresses/numbers are set up, as outlined in the following article:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
You may also be interested in the new SMS feature of Continuity for Yosemite and iOS 8. This enables similar functionality for SMS and MMS messages:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Regards,
- Brenden -
I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me -
I can't see right my mails. I have to double-click in my mail for reading it. Otherwise, the only think I can see, is the list of my mails. Could you help me please?
Go to the right side of the list view and place your cursor over the edge until it turns into a double arrow, then click and drag to the left.
If using the Classic layout, go to the bottom of the screen and after getting the double arrow, click and drag up. -
A text like box has appeared on the screen of my iphoe and this has to be over the app I want to use. I then have to double click on the icon for it to open. I cannot scroll across or down. I can access the apps but because it will not scroll I cannot access all of the screen. Can nayone help please???
It sounds like VoiceOver is partially on. First try triple pushing the Home button. This may turn VoiceOver off. If that doesn't work going to Settings/General/Accessibility and make sure VoiceOver is Off. Note you may have to use 3 fingers on the screen to scroll.
-
I can't change from one screen to another by dragging my finger, it does't respond, in addition to access to an icon I have to double click instead of one.
That's correct. Unless you can magically unlock your 4S, you can't sync it. It's broken. Had you been using the phone properly, you would have been synching it frequently and would have had a recent backup from which to restore your iPhone 5.
-
How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.
The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.
-
ITunes shows I downloaded Maverick in apps but i cant double click to install? (running 10.6.8)
iTunes shows I downloaded Maverick in apps but i cant double click to install? (running 10.6.8)
I looked in finder and do not see file?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message? I have to double click the latest message to open it and then reply. I find this irritating and would like to skip this step and be able to reply from preview and include that message. Am I missing a setting to fix this?
I have found that if you have highlighted some text in the message and then hit reply, the highlighted section is the only bit included in the reply. You need to click on the message in the middle list rather than the preview pain on the righthand side and it should reply normally. To check it's doing this, select a message in the middle section of the screnn then use the down arrow to drop to the next message. Hit reply, and it should reply normally. I hope this helps.
-
Question
What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search. editThe home button has by default moved to the right hand edge of the navigation toolbar. You can move it back by right-clicking on a toolbar, choose customize to open the customize toolbar window, then with that window on display you can drag and drop icons to move them.
If the home icon is not at the right end of the navigation toolbar, use the procedures in the following link to restore it - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
Have to double click to move from screen to screen
hi
having trouble getting rid of the man telling me what i am doing as i am doing it. also have to double click if i need to
move to another screen/
can anyone help pleaseHi janfromliverpool,
It sounds as if you have Voiceover enabled on your iPhone. You can turn it off by going to Settings > General > Accessibility > Voiceover. See this page -
Use Accessibility features in iOS - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
How to create a directory in application server
Hi all, How to create a directory in application server through Progaram?? eg:\tmp - is already existing I want to create \tmp\fi Within \tmp\fi - i should able to store my file,,, Kindly help me urgent...
-
How to make every break column on the top of the rows in the same subgroup
hi, guys: I was wondering if anyone could help me on this problem: I need to set up a break column on a classic report (I ma required to use classic report only), and it works, but I do not know how to make every break column on the top of the rows i
-
Total Rows returned in interactive report
Hi I have an interactive report that displays a warning message if more than 200 rows are returned. Is there anything within APEX that tells me the exact number of rows returned in my report, or at the very least if my report has exceeded my 200 row
-
Hi, can you tell me Outbound idoc for RFQ, Inbound idoc for Quotation and PO
-
I have an java iview with many input fields. It needs more than 20 minutes to be filled up. But if it crosses 15 or 20 minutes then i get a timeout error saying "Error in service call of Resource". Do you have any suggestion as to how can I increase