In Mail, how can I send a short clip of a screen recording?
I have a brief screen recording that I would liketo share with my son. How can I send this as an email attachment, or in the body of an email please? Thanks, Keith
Boy, I would think that should work.
Is the ZIP file too large per your ISP's file attachment rules? For example, my ISP has a 10MB limit on file attachments. I have to split into separate ZIP files anything that's at or over that limit.
Similar Messages
-
Hello All,
When I have a project in the timeline how can I copy a short clip? Sometimes I will make an edit so I will end up with a 5 second shot and I want to put a copy of that shot above it in video track 2 so I can do some matte work. I have tried a few things, but I can't figure out how to copy just that small clip. Is there a duplicate button or something like that so it just makes a clone of that shot?
Thanks for your help.
MikeHi Michael,
Select the clip in the timeline, hold down the Option and Shift keys, and drag it to the place in the timeline you'd like to copy it to. Let go of the mouse to perform an Overwrite Edit and place the duplicated clip where your mouse was pointing to. To do the same thing but perform an Insert Edit, only hold down the Option key when dragging. -
How can I put a short clip to good use?
I have a very short clip, less than 4 seconds, which is difficult to work into my sequence. I'm reluctant to discard it for sentimental reasons. Any suggestions as to what type of special effects I can play so I can keep it?
I've been working for several days on motion and I'm finally getting the hang of how it work, so, I would like to keep it simple.
Thank you in advance.As we have no details it is a question that is impossible to answer ............ rather like, "I have got 3 notes of music, how can I create a symphony?"
However, not being one to run away from the impossible, how about making freeze frames?
One possibility would be to use slow-motion on the clip as has been suggested and finish it with a freeze-frame. -
How can I send email from my yahoo alias account in iPhone5 mail?
How can I send email from my yahoo alias account in iPhone5 mail?
I have 2 email accounts: [email protected] is an alias of [email protected]
In my old iPhone3 I had these accounts set up so that I could send and receive email from both accounts. I did this using the following settings:
‘Other’ POP account info:
Name: xyz
Address: [email protected]
Description: alias
Incoming mail server:
Host name: pop.mail.yahoo.com
User name: [email protected]
Password: password for yahoo account
Server port: 995
Outgoing mail server:
SMTP: smtp.o2.co.uk (o2 is the name of my phone network)
Server port: 25
‘Yahoo!’ account info:
Name: xyz
Address: [email protected]
Password: password for yahoo account
Description: Yahoo!
Outgoing mail server:
Primary server: Yahoo! SMTP server
Server port: 465
I’ve tried using the same settings in my new iPhone5, but it doesn’t work. I can receive mail to both accounts, and can send from the Yahoo account, but I cannot send mail from the alias account. When I try, it displays the message: “Cannot send mail. A copy has been placed in your Outbox. The recipient ‘[email protected]’ was rejected by the server”.
I’ve tried to configure the POP alias account using combinations of ‘pop.mail.yahoo.com’, ‘pop.mail.yahoo.co.uk’, ‘apple.pop.mail.yahoo.co.uk’ and ‘apple.pop.mail.yahoo.com’, for the incoming host, and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server. None of these have worked.
I’ve also tried setting it up using IMAP instead of POP without success. I tried configuring it using combinations of ‘imap.mail.yahoo.com’, ‘apple.imap.mail.yahoo.com’, ‘imap.mail.yahoo.co.uk’ and ‘apple.imap.mail.yahoo.co.uk’ for the incoming mail server and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server.
Yahoo say that if I can't send Yahoo! Mail from my mail program, I may be accessing the Internet through an ISP that is blocking the SMTP port, and that if this is the case, I should try setting the SMTP port number to 587 when sending email via Yahoo!'s SMTP server. I don't think that this is the problem, but I tried it just to make sure - without success.
I’ve also heard that the problem might have something to do with the SPF settings of my alias domain provider. I’m not too sure exactly what SPF settings are, or how to change them, but from what I can gather it seems unlikely that this is the problem given that I was able to send mail from my alias account on my old iPhone3.
Any help much appreciated: how can I get my alias account to send emails in iPhone5 mail?
Many thanks,
PatrickA new development: I've tried sending emails from the alias several times over the past 24 hours, but in general I've deleted them if they haven't sent within about half an hour.
However, one of the messages I left sitting in the outbox did send successfully in the end, but this took about an hour.
So: perhaps my problem is not in fact that I am completely unable to send mail from my alias, but that I can only do so intermittently and extremely slowly, and by ignoring the "cannot send" message.
Any help appreciated. -
How can we send Error Idocs via mail
Hi,
I have read read through forums and understood that it can be achieved either through workflow or through report using table edidd & edids.
If workflow option is used , does the mail trigger for every error idoc ? How can we send daily error report to user say by EOD containing all error idocs using all possible options.
Regards,
RachelRachel,
I dont think so any direct Report will be available just to get Error IDOCs details. Although you can create a simple report to read the tables. An example is in below link.
http://wiki.scn.sap.com/wiki/display/Snippets/Custom+report+for+IDOC+Monitoring
Also, you can create a Query of EDIDC and EDIDS tables to obatin relevant information.
Thanks,
Ravi -
How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail
IN IPAD AIR How can i send an e-mail to several mail adress typing a group name, similar procedure used un gmail wich is very frendly
Before all these updates, one used to be able to create a Group (such as Buddy List), then send emails by clicking on that Group Name. Has not worked for a long time now, though. I wish they would bring it back.
-
How can I send a e-mail by webdynpro develop?
Hi everybody.
The problem is : How can I send an e-mail some user, when some process of my webdynpro could be occur?
1. I know that the BASIS consultant, can help me to active and configurate SMTP, to send e-mails to user of the UME.
My Webdynpro has the function to create financials documents, when a document are created I need to send a e-mail to notify this actionHi Jesus,
There are quite somes examples on SDN, but this document should get you kickstarted: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2678e05a-0701-0010-fa86-ddfbec5a2b94?QuickLink=index&overridelayout=true
Cheers,
Robin -
I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?
Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
How can one send email-sized photo files as attachments in Apple Mail, without the photos appearing in the body of the email? If it can be done, it's not at all obvious, at least not to me. Thanks for any help you can provide.
The "View as icon" option shrinks the photo to an icon in the sender's Apple Mail, but how it appears to the recipient varies dependingy on what e-mail client he/she uses.
Using Apple Mail 5.0 (the Lion version) at both ends, the sender can use the "View as icon" option to shrink his view of the photo to an icon, but the recipient also using Apple Mail 5.0 still sees the full photo in line with the message text. The recipient can then use the "View as icon" option to shrink it to an icon, but I don't think that's not what jackofarabia is looking for.
As far as I know there is no way in the current Apple Mail to do what jackofarabia wants. There should be, but there isn't. -
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
Im trying to send out a word document via email. It tells me it cannot send because I have not yet set up an account with enterage. My email is active already with Apple regular mail program. How can I send it out through reg mail?
Save the Word document. Create your email in your normal mail application (Mail?), click on the add attachment icon (the paperclip if you are using Mail). Navigate to where you saved the Word file and select it. It should now appear as an attachment in your email. If you are sending it to a PC user and you are using Mail make sure 'Send Windows-friendly attachments' is selected in the edit menu. And if you don't want the attachment to display inline within the body of the email Control+Click on it and select 'view as icon'.
-
How can i send mails from mac mail to a PC?
When i send mails from my mac to a Pc (outlook) the mail arrive with a different format or including the mail as an atached document.
How can i send mails from mac mail to a PC outlook with the same format?send it in "windows friendly format" when you click the paper clip for an attachment.
-
How can we send the smartform output to mail.
Dear Friends,
My query is how can we send the smart form output to mail.
In my company,payslip are given to the employee in printed format.instead of that we need to send payslip in mail.how can i do..plz help me.
[email protected]The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note to process a spool request the program can be executed in background or foreground. Because of the additional functionality to allow this to work in both background and foreground it has made it a little more confusing soyou might want to start by looking at the background only program. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF2 *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program can be run in background or online and a spool request *
*& will still be created *
REPORT zspooltopdf2.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX,
p_online no-display.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i,
w_spool_nr like sy-spono.
%_print LIKE pri_params.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
If p_online = 'X'.
Processing performed when program calls itself when run online
gd_spool_nr = sy-spono.
EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
EXIT.
endif.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
ELSE.
gd_spool_nr = sy-spono.
If executed online, it submits a program to perform the write statements
instructing it to create a spool request, this could be another program
which just performs the write statements and then exports sy-spono
to memory. But in this example it calls itself passing X to parameter
p_online, which takes it down an alternative procesing path.
submit ZSPOOLTOPDF2
with p_online = 'X'
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
ENDIF.
Get spool id from program called above
IMPORT gd_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Regards,
Shakti Barath -
How can I send alert through E-mail and SMS
Hi All,
How can I send SAP B1 alert to E-Mail address and SMS.
I am using 2005A US version
I did the following settings ...
Administration --> System Initialization --> General Settings --> Services
I checked the proxy server for Web Connection, I entered the Proxy server IP Address (our company's) and port number 80.
Even though I am not getting any Email response..
Help me to solve this...
Thanks and Regards,
jayakumarHi,
Check this: Regarding email & SMS in alert management
If you want to use DIAPI then check Message Object, too.
HTH
Juha -
How can i send mail from my ipad to my email address on my computor
how can i send e/mail from ipad to my main computor and recieve mail from my computot to my ipad, i joined iclouds with a e/mail address now nothing works
You'd need to set that up with your mail provider
For example, I use yahoo. Id' need to access yahoo via safari and their web interface and see what kind of forwarding or auto replies I can set up.
The iPad mail app won't do it, it has to be done at the server level through your mail provider.
Maybe you are looking for
-
Someone please help me with my iTunes 5.0.2 problem.
I recently updated my itunes to 5.0.2 unfortunately I forgot to restart the computer. I had other updates waiting to be restarted and I put my laptop to sleep and when I opened it, it started configuring and installing. Now once you close itunes for
-
How do I get rid of the new itunes?
I have just downloaded the new itunes and it has already made my dislike for this player greater! I had originally arranged all my music into Albums, which is now art work rather than the choice of art work/List/or a mix; list is what I prefered and
-
How to take print images,videos from iPad
How to take print or copy images / videos from iPad?
-
I've installed Flash Media Interactive Server 4.5 and after installation I successfully streamed to iOS devices. Today, streaming to iOS devices, suddenly stopped working. Streaming to other Flash compatible devices works just fine. I use JWPlayer to
-
I can't figure out why my mac no longer asks me if i want to save my passwords or usernames.
For some reason or another my mac isn't remembering or asking for usernames and passwords.My autofill is turned on.Have tried a couple things using Safari help,but still isn't working.Do some websites just not allow it?