In Mail, Spelling's Learn is not Learning

In mail messages, misspelled words are underlined in red. Right click on the word and a list of alternatives shows up along with IGNORE, LEARN, etc. Click on LEARN and it doesn't work. All the words are still underlined in red. I even quit mail, reopened, started a new mail message with the word, and it is still underlined in red. Any insight as to what is going on? It is a tiny annoyance, but life is too short for any annoyances using modern technology purporting to make life easier.
Thanks,
Maxim

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Similar Messages

  • Sound for outgoing mail sometimes happening and sometimes not

    Hello,
    I noticed already some time ago that Apple Mail seems to make the usual sound for outgoing mail only sometimes and sometimes not. It is more not happening than happening. I cannot recognize any pattern in this behavior.
    Any idea what is going on here and how to fix it - or is this a normal behavior for Mail?
    Thanks.

    Thanks--I found it interesting! Especially when Spell Check quit working for me, too.
    Very weird.
    I went back and selected 'Correct Spelling Automatically' in Text Edit-- that works, but I don't like it either. Whoops, only intermittently. I just looked again and that's not working now. Wow, no restart of computer and I hadn't closed Text Edit-yet it stopped working.
    Spell checking seems to be behaving badly. It will not underline in mail--until I change a misspelled word....and then only sometimes. At the best it's intermittent.
    I hope someone found it interesting enough to fix w/the next system update...

  • Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

    Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

    Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
    If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

  • Exchange mail after iOS 8 upgrade not working

    exchange mail after iOS 8 upgrade not working.
    I can not get email from my exchange account.
    Any suggestion?

    Just had this issue.  I turned WIFI off and it connected fine.  Then turned WIFI back on and working as always.
    It had something to do with the WIFI conflicting with the exchange server.

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • How do I delete an e.mail on my 5s that has a mime attachment,the e.mail can be read but not deleted.

    How do I delete an e.mail  on my 5s iphone that has a mime attachement? the e.mail can be read but not deleted. A message comes up saying that it cannot be moved! The e.mail was sent to me and I forwarded it. The e.mail is not in any other folder in the phone or on my mac. But it might be in my backup to the mac via itunes.

    This is for your protection, its not supposed to be easy.
    You should be keeping a record of all your passwords, security answers, etc.
    Rescue email address and how to reset Apple id sec. questions.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    If that doesn't work and you can verify the following info, call 1-800-APL-CARE.
    1. apple id username, that is not locked or disabled.
    2. serial number of an apple product registerd in your name
    3. Billing info associated with your account

  • I changed my AppleID/Password and now am locked out of iCloud. iCloud says maximum number of free accounts have been activated. tried Settings, Mail etc but iCloud does not appear. I was going to delete it and start again.

    Had to change Apple ID/Password recently now cannot access iCloud. In settings when tapping iC, log in screen appears with old ID and request for (old) password.
    In Settings  Mail, Contacts etc iCloud does not appear. I was going to delete account.
    Trying new ID/Password message appears "maximum no. of free accounts have been activated".
    Using old ID/Password message apperas "you can,t sign in because account was disabled for security reasons ......reset password at iforgot.apple.com which i did.
    Can anybody help please??

    Hi,
    I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
    I reset both my Apple ID and password.
    When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
    Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
    If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
    In settings there is no option to "Delete Account"
    Any suggestions??

  • E-mail messages sent, are received not in the paragraph-form as sent, but

    Dear Friends,
    E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with just two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
    Yours Truly,
    GMS.

    Dear Friends,
    E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer
    business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
    Yours Truly,
    Broduff.

  • My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad,  Because of  Inactivity iCloud not open.

    My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad,  Because of  Inactivity iCloud not open.
    Habibullah Allah Yar
    <Personal Information Edited by Host>

    These are user-to-user forums, you are not talking to Apple here, so I've asked the hosts to remove your email address, postal addresses and phone numbers from your post.
    I'm not entirely sure what you are saying, but if those apps are crashing then have you tried toggling them 'off' and 'on' via Settings > iCloud ? And if that doesn't fix it then try closing them via the iPad's taskbar : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    You could also try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If it's a different problem ... ?

  • Mail receiver adapter: THeaderREPLY-TO not working on ASMA

    Hello people,
    (note: all the @ where changed by " at " because of limitations of SDN)
    I'm trying to set some adapter specific message attributes (ASMA) in a mail receiver adapter.
    Two properties I'm trying to set: THeaderFROM e THeaderREPLY-TO.
    The first one is working great, the second one does not work.
    My scenario is Soap to Mail. I send a soap message, in the message mapping a user defined function get the mail address (to and reply-to) and set it with DinamicConfiguration like this (hard coded to be simple):
    DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail", "THeaderREPLY-TO");
    conf.put(key, "reply.to at teste.com";);
    DynamicConfigurationKey from = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail", "THeaderFROM");
    conf.put(from, "from at teste.com";);
    As in the documentation, it should work. But the mail message reaches the mailbox with mime header Return-Path = from at teste.com.
    Reading all the notes related to mail adapter (and adapter module processing) I found the tool TCPGateway to monitor what is going from adapter engine to the mail server. So I changed a little the scenario to test it and now the scenario is Soap->TCPGateway->MailServer. In the TCPGateway I got this:
    EHLO brjgs916.weg.net
    MAIL FROM:<from at teste.com>;
    RCPT TO:<roberti at mycompany.net>;
    DATA
    Date: Thu, 5 May 2011 19:55:17 -0000
    Subject: mail - teste
    To: roberti at mycompany.net
    From: from at teste.com
    MIME-Version: 1.0
    content-id: payload-98c5c8b0775111e090110018714e4a28 at sap.com
    Content-Type: text/xml;charset=utf-8
    Content-Disposition: attachment;filename="Untitled.xml";
    Content-Transfer-Encoding: binary
    <?xml version="1.0"; encoding="UTF-8"?>
    <ns0:MTP_SAMPLE_MAIL_MESSAGE xmlns:ns0="http://soa.weg.net/sampleMail"><Title>titulo</Title><Body>body a ser preenchido</Body><Footer>footer tambem</Footer></ns0:MTP_SAMPLE_MAIL_MESSAGE>.
    QUIT
    With this information, I found that something is not right in the mail adapter, because it is not writing the relevant reply-to attributes to the mail message.
    Some of you has any idea about it?
    Thank you in advance.
    waldemar roberti
    Edited by: Waldemar Roberti on May 5, 2011 5:02 PM

    Satish,
    Actually (for testing purposes) I have the email roberti at mycompany.com set in all fields of receiver mail adapter mail attributes (from, to, cc and bcc). I turned all of them on and of and analysed the result. It seems that the information whe put on ASMA overloads the information on these mail attributes. But, in mail attributes, we don't have a field for REPLY-TO, just on ASMA we have this field.
    So... the problem is in REPLY-TO. It has not been set in mail adapter, even if I set it with dinamic configuration.
    thank you.
    Waldemar Roberti

  • Mail sender adapter POP server not configured for URL access

    Hi Experts,
    I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
    _1. When I use pop://Fully qualified host name/
    _Error: exception caught during processing mail message; java.net.UnknownHostException
    _2. When I use pop://IP address of host/
    _Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
    I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
    Can someone please help.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

    Hi Shobhit
    Check with these notes:
    804102
    xi 3.0 mail adapter with pop3 user authentication problem
    810238
    XI 3.0 Mail Adapter for POP3 may not report some errors
    also check mailserver security settings ...
    Connection refused occures when XI cannot connect
    in most cases so try checking it again , maybe some ports are not opend on the firewall
    Thanks
    Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

  • Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

    Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
    The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

    I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

  • In settings my mail,contacts,calenders section will not open it just flashes back to menu page, why? and how do i get it to work.

    In settings my mail,contacts,calendars section will not open when tapped it goes back to the menu page. why? help me please anyone.i need to get at my email accounts.

    You need to reset your iPad by holding down the home and also the sleep button at the same time till the Apple logo appears then let it wake up.

Maybe you are looking for