In "Mail" there is no Bcc When addressing.

When I want to send an email to multiple addresses I cannot simply address to the Bcc line. All address go to the To line then I have to cut and paste them to the Bcc line. Any fix for this? I am running 10.4.10. Thanks

In Mail click on Help.
Put bcc in the upper right hand corner search field and press return.
Under "keeping confidentiality" it tells you that you need to create a group in Address Book and then make sure that the checkbox in Mail>Preferences>Composing for sending to a group is unchecked so that all addresses are not shown.
If you use this method you do not have to cut and paste the other respondents into the bcc field.
This is the recommended method but alternatively in the same help window it does say you can do it as you describe.

Similar Messages

  • Can I forward emails from Mail to my work email when I'm there?

    Is is possible to have incoming Mail messages forwarded to another email address when I am at work? It takes too long to log into the web and check my home email at work when I'm there. I have outlook at work and it's way better than Mail (IMO). Can this be done?

    A rule is simply an automated action that occurs based on a set of conditions. The ability to make rules exists in just about all email applications including Outlook and Mail.
    One of the things I like about Mail is that making rules is a lot easier than in Outlook. But, there's no way to make an email client forward email to specific location by just checking a box because application doesn't know which messages you want forwarded and to where to send it until you tell it.
    Anyway, enough background....here's how to make a Rule in Mail:
    -Open Mail and select Mail->Preferences from the menu bar.
    -Click on the Rules tab and click the Add Rule button.
    -Type a name for your rule, e.g. "Forward to Work"
    -For conditions, select To and Contains from the drop-down menus, then type your home email address in the blank at the end.
    -For actions, select Forward Message from the drop-down menu and type your work email address in the blank.
    -Click the OK button.
    That's it. Now all messages to your home address will be forwarded to you work address.

  • HT5361 How can I forward mail to multiple recipients?  When I try to add an address, it replaces the previous address

    How can I forward mail to multiple recipients?  When I add an address, it replaces the previous address.

    Using the + button helped--should have been obvious, but I haven't been using it.  It works but seems very cumbersome to add one at a time.  I had another list of addresses that I could hold down the command button while selecting as many as desired, then click on BCC and double-click on just one of the addresses, and BCC would autofill with all of them.  Unfortunately, when I installed the latest Mac system update, I lost that multiple address capability--it's always something!

  • HT2486 My mail account is linked to my address book. The address book shows First Name, Last Name. When I try to insert a name into an email, the order is reversed...Last Name, First Name.  How can I make the email read in the same order...First Name, Las

    My Mail Account in linked to my address book. The address book shows First Name, Last Name. When I start an email in Mail, the name does appear but the order is reversed...Last Name, First Name. I must have changed a setting somewhere but I don't know where. Does anyone know how to correct it?

    I don't have any problem with my system. My guess is there is something there you aren't quite getting. I'd recommend a visit to your Apple Store, AASP or to contact AppleCare so they can coach you personally.
    You can also play with the Address Book Preferences. However to see how changing a Preference affects the Address Book drag the Preferences window off of the Address Book so you can see both the Preferences window and Address Book Windows. Then toggle a Preference and you will see it instantly changes in the Address Book. 

  • I've just updated my iPad 3 to IOS 7 and when i try to type any thing be it a password or e-mail there is a long lag any idea how to sort this out ?

    I've just updated my iPad 3 to IOS 7 and when i try to type any thing be it a password or e-mail there is a long lag any idea how to sort this out ?

    Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
    $19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

  • Stationary credated in Mail does not appear properly when viewed in Outlook, is there aroundthis?

    Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.

    No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.

  • I just downloaded Maverick last week, and ALL of my contact groups have duplicated.  When I use one to send a group e-mail, everything is doubled in the address bar.  Any suggestions?  Very frustrating.

    I just downloaded Maverick last week, and ALL of my contact groups have duplicated.  When I use one to send a group e-mail, everything is doubled in the address bar.  Any suggestions?  Very frustrating.

    Hello Joannah,
    Thank you for details of the issue you are experiencing with duplicates in Contacts after upgrading to OS X Mavericks.  I would be frustrated by this too.
    If you have enabled iCloud Contacts, I recommend following the steps in the article below:
    iCloud: Resolving duplicate Contacts after setting up iCloud Contacts
    http://support.apple.com/kb/TS4147
    If you’re not using iCloud, I recommend this article instead:
    Contacts (Mavericks): Combine duplicate contacts
    http://support.apple.com/kb/PH15079
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??

    recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??

    Illaas,
    I tried the manual method.  I was able to set the music/video to manual and then restarted the entire system.  After restart, I re-attached the ipod touch to the computer.  The sync automatically ran for everything that wasn't set to manual and it completed without a problem.  I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again.  This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported.  I've never had to do this before, but I will keep it in mind if something like this happens again.  Thank you for pointing me to the manual sync.

  • Why does it say More. . . in email address line when there is only one email address?

    When receiving an email, why does it say 'More. . .' in the To email address line when there is only one email address? It looks like there is more than one recipient when there is actually just one. 

    Have you rebooted since the deletions.  That will empty a number of caches and may restore the freed up space. Also open the iPhoto Library package with the Finder as shown in this screenshot
    locate the iPod Photo Cache folder and delete its contents.  Make no other changes to the contents of the iPHoto LIbrary Package.
    OT

  • Dual G5 Pro with OS X v.5.8 and Safari 4.0.2.  When Safari is open, there is no customary URL address at top of window -- no way to enter an address -- nothing!  What gives?! - is there something basic that I am not aware of?

    Dual G5 Pro with OS X v.5.8 and Safari 4.0.2.  When Safari is open, there is no customary URL address at top of window -- no way to enter an address -- nothing!  What gives?! - is there something basic that I am missing?

    Choose Show Toolbar or Customize Toolbar from the View menu and put it back.
    (68254)

  • Mail Group shows all members when preferences is checked

    Hello
    MacBook air Yosemite 10.10.2 Mail 8.2
    In preferences when I UNcheck the box "When sending to a group, show all member address"
    the compose window display the group correctly but when I send it shows all the member address in my send folder as well as the recipient ???
    thanks for your help

    Try using the BCC field as a workaround.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Mail Feedback

  • Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

    Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    Scenario: I have below configuration of exchange 2010 server Setup:
    1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
    Server Name: WDC2010
    Domain: Blazex.Com
    2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Hub/Client Access Exchange role servers.
    Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Hub and Client Access Server.
    3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    4. 2nd  Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
    Workstation Name: WIN7.blazex.com
    Role: Workstation
    Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010).  I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
    Can someone please help me on this?
    Thanks and Regards
    Shambhu

    Hi Subhash,
    I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
    Below are the questions's answers which was asked by you:
    1.     Please check whether you can send email via Outlook.
    I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    2.     Please run EXBPA to have a health scan.
    I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
    a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
    b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
    c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
    d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
    e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
    The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
    3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
    I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
    4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
    I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
    a) Rebooted the Workstation
    b) Login successfully with same user.
    c) Delete the Old MS Outlook Profile
    d) Create New profile for same user without any problem.
    e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    f) Open the OWA successfully for Same user.
    g) Tried to send mail but again mail went to Drafts Folder.
    5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
    mailbox via OWA to test the issue.
    I tried you suggested option, but sorry it also couldn't help.
    6.  You also check your disk space.
         All Servers have Enough Disk Space. Check the EXBPA Report.
    7. You may run EXTRA to get log information for further troubleshooting.
      Need more time for this.
    8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
       I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
       a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
       b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
       c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
       d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
       e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
       f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
    There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
    I hope my answer will give you some clue and I expect more help from your side.
    With Best Regards
    Shambhu Sharma

  • Mail how to save an email address from new message created?

    Hi, I create a new message, type in the address, but i want to save the address in the address book. How the heck is this possible?
    If i select the email address i control click it, there is NO menu and no options to save the address.
    If i click on the AddressBook button in the tool bar, there is no add button, and i can't drag it to across either, or copy/paste.
    The Help says "In a message that you are sending, click the arrow in a Smart Address you have entered and choose "Add to Address Book" from the pop-up menu." There is absolutely NO arrow and NO menu. Even when i turn ON 'Use Smart Addresses' There is absolutely Nothing in ANY menu that lets me save the address.
    So how the frell is it even possible to save an address? So what, i have to send the email first then wait for someone to reply before i can select 'Add sender to AddressBook' from the message menu? This is madness and certainly not easy or intuitive. And what is the point of the AddressBook button in new messages toolbar?It does nothing. It opens a window and has no options to add an address or enter any details, only has 'TO' But i already know the address!!! Even if i create a new mail , I click the Address book button highlight the address in the list then click the 'TO' button, it does absolutely nothing, im expecting it to just add this address to the address field in the new mail i just created. I then closed the new mail, instead i click the AddressBook button in the main Mail app toolbar, i select an address in the resulting window, hit the 'TO" button, and mail creates a new message, but it doesn't add the address to the new mail's address field, nor does it close it self behind. What a disaster. I thought this was supposed to be simple and eazy, its a nightmare of a design.
    I tried 10.4.5 and now just upgraded to 10.4.6 same problem.
    Frustrated at the lack of intuitiveness.

    Simplest I find is to send the message then look at it in your Sent mailbox. Move the mouse over the To: address and the address will get a blue bubble background with a drop-down arrow at the right end; click this and one of the options should be "add to address book".
    When you start a new message, and click the Address book icon on its toolbar, an address book window should appear with all the entries (individual and group) from your address book. Selecting one (or several) of the entries and clicking to will add them to the To header in your new mail. Alternatively you can drag them. If this is not the behaviour you are seeing, please repost with a more descriptive subject. (It is better for both those trying to help, and those seeking solutions, if the problem described matches the subject!)
    Once you have brought up the little address book window its design behaviour is to stay until you dismiss it; as you say, it does not close when you close the new email. At this stage, selecting an entry and clicking To should start a new email with the To header containing the selected email address. If this is not happening I suspect it is related to your previous problem, so I would include the description there.
    AK

  • I am changing to iCloud on my iMac, MacBook Air and my iPhone. My iMac and MacBook both moved over to iCloud but my iPhone when I go to Settings and click on iCloud it shows my Mail setting turned Off. When I turn it on it wants me to create a new

    I am changing to iCloud on my iMac, MacBook Air and my iPhone. My iMac and MacBook both moved over to iCloud but my iPhone when I go to Settings and click on iCloud it shows my Mail setting turned Off. When I turn it on it wants me to create a new email address to turn on iCloud Mail. I already have to "me" accounts plus another email address and don't want to create another one. I don't understand why it's asking me to do this on my iPhone but didn't ask on my iMac or MacBook and is there a way around creating another @me.com email address?

    Hello Timmy790
    Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Regards,
    -Norm G.

  • How do I view BCC recipient addresses in sent email (since Maverick took this function away)?

    With the Maverick update, it's no longer possible to view BCC email addresses for previously sent messages. I looked EVERYWHERE on my machine and it seems that the data is gone.
    I need to retrieve this information as it's very urgent and regarding a cancer patient. Here's what I want, to be clear. I want to open a previously sent message and view all of the recipients (INCLUDING those who were BCCd!!!!!!!!!!!!)
    Someone from Apple, please help! ASAP!!!!!!!!!!!!!!!

    Barney,
    When I View > Message > All headers I get this....
    Return-Path: <alisonym@____.com>
    Received: from ?IPv6:2601:d:2780:b8a:740f:6a99:d8d8:2c24? ([2601:d:2780:b8a:740f:6a99:d8d8:2c24]) by mx.google.com with ESMTPSA id rj10sm34981492igc.8.2014.02.17.14.34.44 for <multiple recipients> (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Mon, 17 Feb 2014 14:34:48 -0800 (PST)
    Content-Type: multipart/alternative; boundary="Apple-Mail=_8AB03BBE-EB30-4EED-A8BC-C75F92902450"
    Message-Id: <[email protected]>
    Mime-Version: 1.0 (Mac OS X Mail 7.1 \(1827\))
    In-Reply-To: <[email protected]>
    References: <[email protected]>
    X-Mailer: Apple Mail (2.1827)
    When I choose Send Again, I get no addresses in the window.
    Please help!!!

Maybe you are looking for