In Mainstage, triggering a loop made in Logic 8

Anyone have any tips on how to do this? Basically it'd be nice if I could, while in Mainstage I, trigger a software instrument region or an audio region that I made in Logic 8 by hitting a key on my MIDI controller. I don't really want to trigger a loop to play for the duration of a track though. Only in certain parts of a track. Like if I press C1 on my keyboard my region I created in Logic plays. When the region is ended that's it until I wold hit the C1 key again.
Thanks

Playback, exs24 or ultrabeat can do this.
I've had trouble with ultrabeat in MS1. Sometimes a long sample would stop playing. Whoops.

Similar Messages

Logc 7.1 drops when triggering MIDI loops?

I have an Akai sampler, and when i trigger loops within logic 7 via midi, at the end of every bar the Logic stops the loop short of the bar?
So if i do a 4 bar loop the re-triggering is fine until it comes around to loop back to the start again?!? where it jumps?
This is fine on my G5 OSX with 4Gb , triggering the loops on ableton or Protools, only with Logic?!
Any ideas?

update:
Apple technician told me the way Logic uses cores changes depending on it's application.... ugh

Loop Browser Crashes Logic

I have "upgraded" from Logic 7 to 8 (actually a downgrade in my opinion) and then to Logic 9. Now in L9, the Apple Loop browser crashes logic. It will not reindex. I can't play anything back, any activity in the browser crashes Logic. I've seen this post;
Rebuilding the loop index :
Quit Logic if it is open.
Place the folder /Library/Audio/Apple Loops Index/ in the trash. (Note: GarageBand 1 and Jampacks 1-3 used a different location. See Where loops get installed for more information).
Open Logic.
Drag the folder /Library/Audio/Apple Loops/ from the finder into the Loop Browser in Logic.
Will this fix the problem? I'm concerned that this may screw up my browser in L7 or L8 both of which I continue to use. I also have a lot of 3rd party Apple Loops that are in the browser.. what will happen with these?
Any help is appreciated.
Dan Rad

Those instructions you found somewhere are probably fine, but you might as well use the Apple version. Follow this procedure: "Logic: Rebuilding the Loop Index."
It will probably solve the problem, and it won't do any harm.
If it doesn't solve the problem, there are some other things we can try, so let us know.

I can't find converted apple loops in the loop browser within Logic pro 7

Hello There.
I've cereated some apple loops with the apple loops utility. unfortunately I am unable to find them in the loop browser within Logic pro 7.2.1.
I've scaned them using the project manager " so Logic knows about them"
but still didn't reflect in the loop browser.
Is this the normal behavior or what am I doing wrong.
I hope I am doing something wrong, as to me the main feature of the loop browser is to be able to audition the loops quckly at the song tempo.
Thanks a lot in advance
Cheers
P.S searched in the Forum but the answers arn't very clear
Powerbook G4 Mac OS X (10.4.7) 1.67 Mhz 2gig Ram

Just drop them on the Loop Browser and the rest should be taken care of.

Hey, is it possible to load my Tracks, made by Logic Pro 8, to Logic Pro X ??? Thanks for help

Hey,
is it possible to load my tracks, made by Logic pro 8, to Logic pro X.
Thanks for your help.

Yes, it is possible!
Regards

I erased all of the loops on my logic pro 9. Do i need to reinstall all discs, or are there specific discs to install "loops?"

I erased all of the loops on my logic pro 9. Do i need to reinstall all discs, or are there specific discs to install "loops?"

There's a new menu entry in the latest version, allowing you to download all the extra content directly onto your hard drive, without having to keep inserting new DVDs etc. It's 19gb (compressed). If you have a normal/decent internet connection, you could reinstall your loops while you're busy doing something else. Or busy doing nothing.

Loops in both Logic and Garageband

If I add new loops to either Garageband or Logic 8, will they show up in the loop browser of the other app? (Trying to avoid duplicate folders).

Hi,
I have the Jam Packs, but use them with Logic Pro 8. I don't expect to see the Jam Packs in Ultrabeat, but use them in EXS (for you EXSP I think) and use the Ultrabeat as another separate option.
Maybe I'm not correct, but I thought you access the sounds that way in Logic Express. I can even access setting I made up in Garageband too.
with best regards,
Karn.

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Problem previewing loops in the loop browser in Logic 8

Loops are only audible when the sequencer is not playing.
When the sequencer is playing, the selected loop shows it's playing in the loop browser window, but I cannot hear it.
ANY ANSWERS?
NOTE:
All my outputs in logic (including the loop browse strip) are routed to SPDIF OUT as I have a DynAudio digital speaker system.
Thanks in advance,
Hennie

I have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.

How to get current loop pass for LOGICAL DATABASE

HI,
can anyone tell me how to find the current loop pass in case of logical db.
As i have to put some condition when cursor goes to GET statement 2nd time..??
Mrunal

U need to explicitly handle this in the program.
START-OF-SELECTION.
DATA V_I TYPE I.
Get Event starts
GET PERAS.
V_I = V_I + 1.
IF v_i = 2.
*write the condition ...
ENDIF.
END-OF-SELECTION.

Adding Loops etc to Logic...

Looking for sites to access sounds, loops and plug ins etc to add to my Library in Logic?

Hey Bill
             Thanks NI does have an array of awesome stuff in komplete 8 and the guys in the store would sell you anyting to make a commission I do have a 27" i mac with 4 g of memory and frankly I only use this for music but I do have a 1 TB external hard drive I havent even Dapened yet with info or storage.
              Well lets take the facts in hand just guitar rig 5 alone is $200 so adding one at a time could run in $1000nds Komplete 8 is going for $499 I was asking imput on users that may have used NI or komplete 8 to see if it was a worth while buy for an addition to logic 9 and as for you imput I think i will take the chance and buy it.
           I could always upgrade or add in the future. Main programs ?   Massive programs ?    try to explain becasue if it all comes down to it I will just install the whole thing on my external   lastley If i do add the programs to the computer wont it automatically become a plug in in logic I know when i added addictive drums it added it to the I/O plug in section near ultra beat but anyway I am farley new to all this in the last year and wow what did i get myself into ...lol Hopefully a whole new world   Thanks for your input     Carl

What sort of updates were made between Logic 7.0.x --- 7.3.x ?

Hi I was pretty much new to Logic with version 8. I am guessing that before Logic 9 we can expect Logic 8.1 and I was wondering what sort of changes are made for these new sub-updates such as from 7.2 to 7.3 and what sort of things might be changed for 8.1 if there is such a version? I guess the amount of update will be greater than 8.0.0 to 8.0.2
Cheers
Sam

From memory, it went:
7.0.0
7.0.1 (minor bugfixes)
7.1 (some additional features that should have been in 7.0.0 but weren't ready, bugifxes)
7.1.1 (bugfixes)
7.2 (first universal binary version, Apogee support, more small features & enhancements, bugfixes)
7.2.1 (bugfixes)
7.2.2 (bugfixes)
7.2.3 (bugfixes)
Something like that anyway.
7.1, and 7.2 were both paid updates.
Doesn't mean it will be this way for LP8, and until recently I would have guessed that we'd get a 8.1 version at least - probably coinciding with the Snow Leopard release, and taking advantage of those features. However, this might be enough of a major feature update that it won't happen until Logic 9.
But it's all speculation, no ones knows apart from those guys in Hamburg and some other Apple people...

How does it work...LOOP,..ENDLOOP logic

I just tried the script below to understand the loop logic.
FIX ("Person","Jan")
var c=0;
LOOP(2)
"wage"
c=c+1;
c;
ENDLOOP
ENDFIX
I expected that the result of the calculation would be wage = 2 but instead I found wage = 10.
I tried this with LOOP(2) too and the result was wage = 19.
it is like when loop = 1 c= 1
when loop = 2 c= 10
when loop = 3 c= 19
I am completely lost in LOOP logic. How does this logic work.

one question regarding your answer.,
I have these dimesions : company , costcenter , person , period.
company has comp1 , comp2 members
costcenter has cc1 , cc2 members
person has p1 , p2 members
period as usual.
I have only two data blocks which are ; comp1->cc1->p1->begbalance and comp1->cc1->p2->begbalance
I dont have any data for comp2 or cc2.
And my whole script as below.When I check the app.log I see the script created data for comp2 and cc2 aswell.
But in the script I didnt even used "SET CREATENONMISSINGBLK ON".is this typical for essbase.
I even tried "SET CREATENONMISSINGBLK OFF" nothing changed.
So how can I manage my script to work for only existing data.
FIX(@RELATIVE ("company",0),@RELATIVE ("costcenter",0),@RELATIVE ("person",0))
FIX ("jan")
SET MSG DETAIL;
LOOP(1)
"wage"
c=c+1;
c;
ENDLOOP
ENDFIX
ENDFIX
ENDFIX
ENDFIX

Missed iterations of TTL triggered timed loop

Hello everyone,
I have a camera control VI that waits for TTL information from the camera shutter and uses it as a timing source for a timed loop. In this timed loop the camera is readout and analyzed. The program should react as soon a possible to a new image and therefore I set the timed loop to 'Discard missed items' so that it doesnt try to catch up (the events im trying to detect are quite rare and last several frames).
The problem is this: When I set the camera for a certain numebr of frames (for example 10.000 frames) sometimes due to the discarded frames the loop iteration number never reaches the expected last frame number and doesnt exit (it stays at 9.998 for instance). I noticed I can prevent this by deselecting 'maintain original phase' . However it is unclear to me what exactly happens with these settings in a TTL triggered situation like this.
Is it the case that the loop skips the new data but starts the next loop at the correct iteration number (+1)? Or is something else happening?
Im thankfull for any help!
Solved!
Go to Solution.

Dear j.win,
If you deselect "Maintain Original Phase", actually you will never discard any iteration, whatever the value of "Discard missed items". Instead, the loop will try to catch up with the late iterations.
Using an external timing source (your TTL for example) instead of an internal timing source does not change anything. You can use the "Period" (dt) input of the Timed Loop to specify when the loop is supposed to iterate (the unit is the "ticks" in the case of an external timing source). A value of "1" means that the Loop try to iterate at every ticks of the external timing source. If for some reason one iteration lasts longer than that, you will have a "late iteration". Also with a value of "1", it is not possible to modify the "phase", then the "Maintain Original Phase" parameter will just defined wether or not you skip the iteration. If "Maintain Original Phase" is false, the loop will execute immediatly after a late iteration to still execute it, but a bit latter. If the "Maintain Original Phase" is true, the loop will execute immediatly after a late iteraion if the "Discard missed item" is false otherwise the loop will skip the iteration.
Is it clearer now?
Regards,
Cédric | NI Belgium

Can't download additional content in the loops section in Logic pro x, what's the solution?

Can't download some of the additional contents from the loops in Logic Pro x, whenever I download additional contents it takes it's time to download but then when I quit Logic and start it again, the loops still can't be selected, they aren't getting downloaded, what's the solution ?

Just click loops , on the top of the panel click loops, and select "reindex all loops".
http://support.apple.com/kb/HT5894

In Mainstage, triggering a loop made in Logic 8

Similar Messages

Maybe you are looking for