In Mass Maintenance (MM46) cannot see the Z field.

Hi Guys,
In Mass Maintenance MM46, I am unable to see the Z field which are maintained in transparent table  Marc..
Code has been maintained in BADI. However it is not showing it.. what could be the possible reason for not showing it.
Thanks
Sandeep

.

Similar Messages

  • Cannot see the appended fields on BW side

    Hello all,
    I appended the extract structure of a datasource (added two fields), I can see those field in RSA6 and can see the data in RSA3. Then I replicate it on BW side and am trying to create transformation between that datasource and DSO but I cannot see the added fields in the transformation rules so that I can map it to the infoobjects in DSO. When I see the fields tab of datasource (in datasource tab in RSA1) I can see those two fields but I am not getting now how do I map it with DSO objects.
    Can someone throw some light please.
    Thanks,
    Kiran

    hello all,
    I tried same thing completely by using 3.x method transfer rules and update rules and it works good.
    I finally can see the appended fields. I did the whole process as the 3.x method, transferred the fields in transfer structure, added my infoobjects in communication structure and then did the transfer rules. So now finally I am able to see the fields in datasource and now I am able to map the source fields to the target fields (Z infoobjects) in DSO.
    I can see the data in PSA, so I just went ahead and did a direct assignment so that data will go to the target infoobjects but for some reason still those columns are blank, so basically there is data in PSA but its not getting to DSO.
    Do we have to anything different in this new version like write a routine or something in transformation rules?
    Are these steps right for the new version NW 2004s, or is there any additional step in this new version.
    Thanks,
    Kiran
    Message was edited by: Kiran Mehendale

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • Paste from Illustrator to Photoshop, I cannot see the pasted object

    Sorry for this dumb question but I have tried everything I can think of before asking this question.  I have a single grouped object in Illustrator and I select the object and "Copy".  Then I open up a new photoshop project and choose "Paste".  Then I get four questions:
    Smart Object, Pixles, Path and Shape Layer to choose from.  No matter which one I choose I get a large box with an X.  I cannot see the object just the box that is x'd out.  This must mean something but I cannot figure it out.  When I place it dissapears.
    Please what is the secret to pasting objects into Windows Photoshop CS4?
    Thanks, Brent

    Magically, pasting started working.  Maybe, my computer was running out of memory or something.
    Thanks for your helpful answer.
    -Brent

  • I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

    I have an iphone 4 and an HP Pavillion with windows 7.  I always have been able to connect my iphone to my laptop and open
    the DCIM folder and see the picture icons so I can pick the ones I want to download.  After upgrading to iOS8 I cannot see the icons after a
    few seconds of connecting the phone to the computer.  They all turn into the windows icon.
    I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred.  I don't want all the pictures I take on my computer.

    http://support.apple.com/kb/HT1808

  • User cannot see the "-" signs on amounts in ALV report

    Hi all,
    We have a problem with a user, who cannot see the signs on the amounts in an ALV report:
    <a href="http://img66.imageshack.us/img66/1424/nataliabr9.jpg">Report without signs</a>
    The user has tested this report with his user, and another test user, on his computer and on another computer. It does not change anything, he cannot see the signs "-" on the amounts.
    But when I launch the same report on the same client, I cann see the signs:
    <a href="http://img398.imageshack.us/img398/1203/moigl3.jpg">Report with signs</a>
    So, I think it does not come from his user (he has tested with two different users), or from his computer (he has tested on two different computers).
    Do you have any ideas?
    Thanks for your help.

    Having seen and "played" with an NB100-12a the other day I must agree that the grey letters on black keys
    aren't a clever idea - its bad enough that the keys are so small also.
    I currently own a satellite Pro with which I am very happy ( apart from the inclusion of Windows Vista which I
    don't particularily like ) and found this machine easy to "drive" BUT due to the keyboard size and lettering
    I won't be buying one ( unless they do a redesign - an acer aspire one keyboard and touchpad or NC10 style
    design ) and I think that the price of these machines has recently dropped from approx £300 to approx £270
    due to poor take up by the public mainly for the above reasons.
    Sorry Toshiba looks like i'll be buying an NC10 - unless I hear of a possible redesign.#
    Mike

  • I cannot see the print button on the bottom tab in order to print a document even when I hide to tool bar.

    I recently changed my computer software from Vista to Window & Ultimate. Since changing, I cannot see the print button which should be at the bottom. I have tried to hide the bottom toolbar but it still does not allow me to see the print button. Please give me directions in easy to read English.

    If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
    *"View > Toolbars"
    Open the Customize window to set which toolbar items to display:
    *View > Toolbars > Customize
    *Firefox > Options > Toolbar Layout
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • HT201335 I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me

    I cannot see the airplay icon on my iPad both iPad and Apple TV on same network help me?

    ipad1 don't support airplay mirror

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

  • I cannot see the access code on my itunes gift card, it got scraped off.

    I cannot see the the access code it got scraped off and i cant redeem my itunes gift card.

    Try this support document:
    iTunes Store: Invalid, inactive, or illegible codes

  • After Upgrade to IOS 6.1, find my iPhone's map cannot see the street or city, especially in China, can we change back to google map in this app?

    After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
    If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
    So stupid Apple!!!!!

    https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
    It won't help find your iPhone, however.

  • Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

    Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an I-Tunes software update, but I am not sure.  Is this likely a software issue or is the shuffle not working correctly?

    Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an I-Tunes software update, but I am not sure.  Is this likely a software issue or is the shuffle not working correctly?

  • In the forum I CANNOT SEE the "Accept as solution" button...... :(

      In the forum threads I simply Cannot see the "Accept as Solution" button FOR THE LIFE OF ME.........       
             - Can you help me locate it,please ?
    This question was solved.
    View Solution.

    Hi,
    In looking at the posts you participated in, it appears that the thread was started by another user. You can only see the “Accept as Solution” button on thread started by you. 
    Hope this helps.
    Regards,
    Valerie
    Moderator

  • New install Express on Win 8 can see the Server name but cannot see the instance

    I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
    The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
    The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
    I am looking for clues as to what may cause the instance name to not appear
    thanks in advance
    jnc

    Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
    What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
    jnc
    Hi jnc,
    Could you please verify that if  the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
    If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
    SQL Server\Instance Names).
    To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
    However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
    Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • I cannot see bold/italic icon. I also cannot see the font styles. How do I put these on the toolbar

    I cannot see the above on my desktop. I also cannot see the font styles like type of print and the font size.

    I cannot see the above on my desktop. I also cannot see the font styles like type of print and the font size.

Maybe you are looking for