In material master How to add a new field on Basic data 1 view
Please Help It's very Urgent...
I have the Requirement that in Material Master a new field reqired to be added on basic data 1 view. This new field should be added just below field Old Material Number( MARA-BISMT).
Can anyone Please suggest the correct way to add the field as per above requirement.
I hope to get quick reply.
Thanks and Regards...
Tanweer Zaki
No need to validate all the other fields is no wear concerened with you, if you have any requirement to validate your field MVKE-LFMAX .
PROCESS BEFORE OUTPUT.
Verarbeitung vor der Ausgabe
MODULE INIT_SUB.
MODULE GET_DATEN_SUB.
MODULE FELDAUSWAHL.
MODULE SONDERFAUS.
MODULE SONFAUSW_IN_FGRUPPEN.
MODULE FAUSW_BEZEICHNUNGEN.
MODULE FELDHISTORIE.
MODULE BILDSTATUS.
MODULE ZUSREF_VORSCHLAGEN_B.
MODULE REFDATEN_VORSCHLAGEN.
MODULE ZUSREF_VORSCHLAGEN_A.
MODULE SET_DATEN_SUB.
PROCESS AFTER INPUT.
Verarbeitung nach der Eingabe
MODULE GET_DATEN_SUB.
CHAIN.
FIELD MVKE-LFMNG.
FIELD MVKE-AUMNG.
MODULE MVKE-LFMNG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD MVKE-EFMNG.
FIELD MVKE-SCMNG.
FIELD MVKE-RDPRF.
CHAIN.
FIELD MVKE-SCHME.
MODULE MVKE-SCHME.
ENDCHAIN.
CHAIN.
FIELD MVKE-RDPRF.
MODULE MVKE-RDPRF.
ENDCHAIN.
<b>CHAIN." to validate your field
FIELD MVKE-LFMAX.
MODULE MVKE-LFMAX.
ENDCHAIN.</b>
MODULE SET_DATEN_SUB.
PROCESS ON VALUE-REQUEST.
Selbstprogrammierte Eingabehilfen
FIELD MVKE-SCHME MODULE MEALL_HELP.
FIELD MVKE-RDPRF MODULE MVKE-RDPRF_HELP.
<b>&----
*& Module MVKE-LFMAX INPUT
text
MODULE MVKE-RDPRF INPUT.
Validate check code
ENDMODULE. " MVKE-LFMAX INPUT</b>
Thanks and Regards,
Pavankumar
Similar Messages
-
Add a new field in basic data tab in PPOME for a position
Hello Evryone,
I want to display a Job ID field in Basic Data tab when displaying a position. Is this something to do in config? If yes, could anyone please guide me how to do it? Right now I can see only the Job description, but no ID.
Thank you,
RushHi
Job ID field will not be displayed in Basic Data Tab. That you can see in the top hald of the portion under <-- Mark.
The details you can see are
Task Assignment - Executive
Code-Exe
ID C 50000084
Valid from 30.03.2007
Valid to Unlimited
First select the Job "Executive" and press enter, then you can find the details in the first half of the screen.
Please reward the points without fail.
Regards
Venu -
How to add a new field in MM01, with say contaminent as a field?
How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?
Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717# -
How to add a new url link in a view of an existing webdynpro component?
How to add a new url link in a view of an existing webdynpro component?
hi ,
refer SAP online hep :
Implementing Enhancements in a View
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
Enhancements means inserting user developments into SAP development objects at predefined positions.
The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
refernce :
have a look at this article
How to Create Enhancement Implementation in Web Dynpro ABAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
as pointed correctly by Saurav in earlier thread
regards,
amit -
Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK
Hi All ,
How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers& &komkfkwrt&
(currency) (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji -
How to add a new field in the cube and load data
Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico -
How to add a new Field in the Dynamic Selection screen section.
HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant PrabhuHi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico -
How to add a new field in the Field Mapping
Dear Freinds,
I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3 fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
ZPA30_08 LSMW
Fields
TABNAME Table Name
Source: ZP0008_STRC-PERNR (Personnel Number)
Rule : Default Settings
Code: ZPA30_08-TABNAME = 'ZPA30_08'.
TCODE Transaction Code
Rule : Default Settings
Code: ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamlaHi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico -
Layout Set: How to add a new field in a layout Set?
Hi ABAPPERS.
Question:
How can I add a new field in a layout set?
Scenario:
QC21 uses a global Layout Set ZQMECOA_GLOBAL.
There's a field required in this Layout Set which is Production Date(CAUFVD-GLTRP).
Where is the date query happening here?
Where can I insert the SELECT statement for the new field required?
I try to look at:
OPEN_FORM and WRITE_FORM, it seems that date query or SELECTION of data is not happening here.
Thanks.If you are adding a header field then you will extend the header structure in CRM and do the same with Item structures for Item fields. You will use EEWB or similar technique in the CRM backend to extend the header or item.
These extended fields in the backed are available in customer_h or _i structures in the order object that can be read and modified in the Header BAdI or Item BAdi.
If you think that this message is cryptic or not enough, then you should search for Extension Guide in this forum and read the document. -
How to add a new field in order.jsp
Hey,
I want to add a new field in order.jsp. How to store that data into backend?If you are adding a header field then you will extend the header structure in CRM and do the same with Item structures for Item fields. You will use EEWB or similar technique in the CRM backend to extend the header or item.
These extended fields in the backed are available in customer_h or _i structures in the order object that can be read and modified in the Header BAdI or Item BAdi.
If you think that this message is cryptic or not enough, then you should search for Extension Guide in this forum and read the document. -
How to Add a new Currency in HFM Data form and grid (Rates)
Hi Gurus,
Am very new to this forum.
Can someone explain me how to add a new currency to the existing data for or grid in the Workspace.
Regards,
VinodHi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location. -
How to add a new field in predefined report output
HI,
how to and where to search for the filling of "fieldcat table" in the predefined ALV report.
So that i can add a new field in the output of a predefined reportHi
Try to check where the fm REUSE_ALV_FIELDCATALOG_MERGE is used in the report.
Max -
How to add a new field to an existing Generic Search result list?
Good day,
I'm new to the concepts of the Generic Search Framework. I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C". This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
From the *modification\generic-searchbackend-config.xml file, the existing
<h4><property-group name="billing_resultlist_B2B_R3">
<property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
<property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
<property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
<property name="CURRENCY" type="hidden" />
<property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
<property name="PAYERS_GUID" type="hidden" />
<property name="SD_DOC_CAT" type="hidden" />
<property name="OBJECTS_ORIGIN" type="hidden" />
</property-group>
</h4>
I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework. I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified. How it is specified to be a part of the result set?
After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
I would greatly appreciate any help.
Thanks,
_kevinHi Kevin,
this means you are working in this section of the generic-searchbackend-config.xml
<property-group name="SearchCriteria_B2B_Billing"
useSearchRequestMemory="true">
Below this property
<property name="IRT_BDH_BILL_TYPE"
type="box"
entityType="BEART_BILL_TYPE"
tokenType="EXP"
requestParameterName="rc_documenttypes"
label="gs.att.lbl.doc.type"
UIJScriptOnChange="GSloadNewPageR3(this);">
<allowedValue value="ORDER" description="b2b.status.shuffler.key1val2"/>
<allowedValue value="QUOTATION" description="b2b.status.shuffler.key1val1" />
<allowedValue value="INQUIRY" description="b2b.status.shuffler.key1val11" />
<allowedValue value="ORDERTMP" description="b2b.status.shuffler.key1val3" />
<allowedValue value="CONTRACT" description="b2b.status.shuffler.key1val4" />
<allowedValue value="INVOICE" description="b2b.status.shuffler.key1val5" default="true"/>
<allowedValue value="CREDITMEMO" description="b2b.status.shuffler.key1val6" />
<allowedValue value="DOWNPAYMENT" description="b2b.status.shuffler.key1val7" />
<allowedValue value="AUCTION" description="b2b.status.shuffler.key1val9" />
</property>
please try adding this new property
<property name="DOCUMENT_STATUS(1)"
entityType="CL_CRM_REPORT_SET_STATUS"
tokenType="RAN"
type="hidden"
requestParameterName="rc_status_head1" value="C" />
This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !
Philipp Koock
SAP CRM Web Channel Consultant
http://www.koock.net -
How to add a new field on the right side of 'Part function' in Opportunity
HI All
I have a requirement wherein I need to add a new field for 'first name/last name' on the right side of 'Partner function' field in opportunity search criteria..
Ex:(here i'm showing overview how the search criterial screen appears in UI since i can't attach screen shot)
Partner function is sales lead firstname/lastname
It is similar to...when we select the option 'Is between' for date field then automatically one extra field will appear
on the extreme right to enter a range for the date so similary I need to add one field to the extreme right where
the user will select 'first name/lastname' using 'F4' help in addition the abvoe 'Partner function'.
Could you please let me know how can we add it??
Regards
AnilHi,
First try to find out if you already have that field available in your view configuration. If yes, then you just need to add that to visible/displayed fields. Other wise you'd have to extend the context nodes using AET/EEWB. After you add the fields using configuration you can move them where ever you want to place them. I believe for first name/last name F4 comes by default.
Regards
Prasenjit -
How to add a new field to the Quote: Shipping and Bill Tab Payment region
Hello All,
We have a requirement to add payment description column to the Payment Region of Shipping and Bill tab in Quoting User(Quote Page).
We have extended the View object HeaderPaymentsVOObj and created a custom view object, then created and ported the substitution.
In Quotes page, 'Shipping and Bills' tab Payments region, we have created a new item(Payment Description), assigned the custom View object instance and attribute to it.
We are able to enter and update the payment details before substitution, but after substitution while entering payment details we are facing the below error.
At most one payment record can exist at quote header/line level.
Help and inputs are highly appreciated.
Thanks in advance.
Regards,
Supriya.Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico
Maybe you are looking for
-
please help i cant update itunes or anything on my computer, vuze
-
Generated pdf file from oracle reports show bad characters
Hello all, Iam fighting with a problem with generated pdf file from oracle reports which show some bad characters. I was searching for some information but it didnt help... I have Oracle Database 11g R2 (or 10g R2) on Oracle Linux or Windows, Oracle
-
Attachments and pdf form offline
It would be great if partecipants in my surveys could be able to attach files at the pdf form while they are filling it offline.
-
Max number of days in Target Range of Coverage Profile
I created a range of coverage profile to use for dynamic safety stock... I set my period indicator to 'M' for months... however it appears that the system calculates my average daily requirement and then multiplies that by my target, min, and max. t
-
Hello, I have a problema with the IT1222 (General Attribute Maint.) in OM (Po10). I have configured it in SPRO with a new sutype (9104) and this subtype with 2 attributes in the table T77OMATTR. Well, all is working, but I need that those attributes