In Material Master Screen,functionally what is Requirement Group in the MRP

In Material Master Screen,functionally what is Requirement Group in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

Similar Messages

  • In Material Master Screen,functionally what is BAckward Consumption period

    In Material Master Screen,functionally what is BAckward Consumption period & Forward Consumption period in the MRP Screen.Pls explain its functionality

    Hi,
    The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
    The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
    Prerequisites
    ·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
    ·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
    ·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
    Regards,
    Vijay

  • In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.

    In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.Pls explain its functionality

    THis indicator will define whether the material is available for the following....
    Subassembly planning with final assembly
    Gross requirements planning
    Subassembly planning without final assembly

  • In Material Master Screen,functionally what is Safety time and safety time

    In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

    Hi,
    The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
    The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
    Prerequisites
    ·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
    ·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
    ·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
    Regards,
    Vijay

  • In Material Master Screen,functionally what is Picking Storage type in the

    In Material Master Screen,functionally what is Picking Storage type in the Warehouse Management Screen.Pls explain its functionality

    This indicator points to the customizing of picking strategies. This way SAP knows which picking strategy to take for a particular material, as the picking strategy may differ from material to material

  • Material master screens requirement

    Hi guru's,
    I've a unique business scenario and would like to get your inputs on this.
    Here is my business scenario:-
    Our material master screens/tables are hugely customized. We have lots of custom fields on mara, marc, mvke and mbew. We have been using custom screen sequence (yz) for material master for a long time and not any of the SAP provided standard screen sequences. Lot of the these custom fields are put in yz screen sequence screens. We have lot of materials on production with these custom fields populated. We got a business requirement to activate material ledger now and requirement is to put back 21 standard screen sequence. But 21 screen sequence doesn't have any of the custom fields.
    I know one way is to setup new screen sequence(copying 21) and put these custom fields but I would like to get your expert advise before moving forward.
    What are other ways to achieve this ? Any easy ways ?
    Can we just modify accounting view on yz ?
    What other impacts are we going to have for material ledger activation from MM point of view and during go-live ?
    Sorry I've not worked on Material ledger activated environment before.
    hope to hear some inputs.
    Thank you in advance.

    can anybody post their input please ?

  • Material Master screen at right top corner lock button is display ?

    Hi
    Please guide for the function of lock button at right top corner -right side of check scren data
    If you click system shows lock relevant field in display mode .how to make this in change mode.
    if you enter system shows  material is locked but we can create PO against that material also.
    Thanks for response
    AJIT

    If a particular field is locked in the material master, then you can unlock it . Follow the path in spro-logistics general-material master-field selection-define lock relevant field. Make the required settings.
    Thanks

  • Material master screen

    Hi Experts,
    How to go to material master screen in  SAP ECC6.0 and how can  I choose information on material (1300-260, IDES system)?
    Thanks,
    Manjujay

    Hi,
    Use transaction MM03 SELECT MATERAIL selectVIEWS Basic / Purchasing whichever you want to view
    Put the plant 0001 in IDES and storage 0001 and you can see material master
    Thanks
    Diwakar

  • HT4108 What is required to use the video composite out on the iPhone 4.  Left and right audio works ok

    What is required to use the video composite out on the iPhone 4   The left and right audio works ok

    Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

  • While working in Material Master, Before exporting to Excel need to know the count of listed items in SQVI Reporting

    While working in Material Master, Before exporting to Excel need to know the count of listed items in SQVI Reporting

    Major documentation is at https://service.sap.com/installmdm.
    In the "Installation" section, you can find information about predefined object models (e.g. Product, Business Partner). For "Vendor" information, please check under "Previous Releases (ZIP Files) > MDM 5.5 (SP03) Installation Guides > SAP ERP-MDM Field Mapping and Check Tables.xls.

  • What is Requirement Tracking Number and MRP Controller

    Hi,
    Can anybody please brief me on the foll:
    What is Requirement Tracking Number and MRP Controller?
    Thanks

    .

  • Addition of new TAB at Material Master screen

    Hi Experts,
    I want to add one new tab in between "Descriptions" and "Unit of Measure" tab (under "Additional Data" section in material master). That should hold few language dependent "Brand and Product" data. But, I have no idea is it possible or not. 
    Please let me know the process if it is possible.
    Thank You.

    Transaction Code - MM01                     Create Material &
    Exit Name           Description
    MGA00001            Material Master (Industry): Checks and Enhancements
    MGA00002            Material Master (Industry): Number Assignment
    MGA00003            Material Master (Industry and Retail): Number Display
    No of Exits:          3
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • GTS How to get commodity code from material master ? function/ table

    Hello,
    I have to write a "simple" program in GTS system.    (In SD   Commodity code is field MARC-STAWN  )
    The customer wants to enter material numbers ( from x  to y )
    and the program should display:
    Material--Material text--Commodity codevalidity from--
    validity to
    4711--Maschine_A--12345678905.08.2006--
    31.12.2008
    124587444--01.01.2009--
    31.12.9999
    4712--Maschine_B--5656568901.12.2007--
    31.12.2009
    (The customer wants to have a look if all Commodity codes in GTS are maintained)
    Can someone give me the name of the tables where it is stored in GTS?
    Or are there any function calls to get material data?
    best regards and many thanks
    Norbert
    Edited by: Norbert Zanders on Jan 1, 2009 5:08 PM

    You have to consider the following tables:
    /SAPSLL/PNTPR --> product number and GUID
    /SAPSLL/PRCTS --> product GUID and GUID of commodity code
    /SAPSLL/CTSNUM or /SAPSLL/CTSNUMC--> commodity code (general or country specific)
    /SAPSLL/CTSNUMT --> commodity code description
    /SAPSLL/PRT --> material description

  • Restricting Customer Master Screen Enhancement depending on Account Group

    Hello Techies,
    I have added a new tab to receive an information (RDC) which will be saved in a new field of KNVV table.
    This was done implementing particular interfaces of BADIs CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS.
    I now want this button to be visible only when a particular account group is selected during creation (XD01) or when changes are made to a customer having that particular AG.
    The information about the AG stored in the KTOKD field of the table KNA1.
    But I am not very sure how to restrict this button on the basis of that.
    Any helpful suggestions?
    P.S. Please let me know if this question requires re-categorization.

    Hi Juan,
    I am able to assign the content of the table GT_SCGR_ACTIVE to a field symbol. And to check the account group, I am checking the selection parameter value (SAPMF02D)S_KTOKD.
    So far so good, but there is another problem. I am not able to access the 'USED' field of the table stored in the field symbol.
    FIELD-SYMBOLS: <fs_xvbap> TYPE ANY.
    LF_TEXT = '(SAPMF02D)GT_SCGR_ACTIVE[]'.
    ASSIGN (LF_TEXT) TO <FS_XVBAP>.
    IF SY-SUBRC EQ 0.
           IF '(SAPMF02D)S_KTOKD' EQ '5001' OR '(SAPMF02D)S_KTOKD' EQ '5002'.
             <FS_XVBAP>-USED = ''.
           ENDIF.
    This gives error saying it is not a structure therefore no such component.
    Any suggestions?

  • What's required to use the built-in LDAP authentication scheme

    In order to use the built-in LDAP authentication scheme in my ApEx application, do I have to have anything more installed in my oracle environment or available to us than accessible LDAP addressing? Our environment is a 10.2 database instance (Enterprise Edition) with ApEx and Microsoft Active Directory that has LDAP setup. It looks like all the DBMS.LDAP packages are in place in my database.
    I'm using something similar to the below for built-in prompts but all LDAP tests fail:
    host=ourdc1.ourdc2.ourdc3.edu
    Port=389
    cn=%LDAP_USER%,OU=Users, OU=Department,DC=ourdc1,DC=ourdc2,DC=ourdc3,DC=edu

    Hello,
    What is your name?
    I know this sounds funny but when I was starting with AD LDAP authentication I seem to remember the user name being the key. Instead of "username" I had to use "[email protected]".
    Ultimately, I created a custom package built on DBMS_LDAP as the ApEx package is really targeted for OID.
    Regards,
    Dan

Maybe you are looking for