In Max 3.1.1 no daqmx device works with its test panel or self test

I have a NI-5122 device and since loading DAQ 7.3 no DAQmx device appears to work.

The NI-DAQ installer provides all the files necessary for MAX to detect the NI-5112, but not for the NI-5122. The NI-5122 will not show up in MAX until NI-SCOPE is installed.

Similar Messages

  • My ipod sounds as if it has interference when on docking station.....3 other apple devices work with no such problem...i.e nano ,classic and 2x separate iphones, with no problems .I have been given a 2nd ipod touch replacement, it plays with interference

    ipod problems
    My ipod sounds as if it has interference when on docking station....3 other apple devices work with no such problems, i.e a nano. a classic and 2 separate iphones    so the problem doesn't seem to be the docking station...I have been given 2 reolacement ipods and the sound persists....it is obviously the connection.....as before downloading any data on the new ipod I docked it and the noise was present ....mairiskye....

    - Is it a 4G iPod? That model sometimes mates poorly with dock because the configuration of the iPod by the dock connector is different that other devices. Thus, make sure it is fulld/seated in the dock.
    - Have you brought the iPod and dock to the Genius at the an Apple store.

  • HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

    hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

    Google "iOS versions" and read the first match (Wikipedia)........

  • BK Precision device works in VISA test panel but fails when using driver

    I am trying to control a BK Precision XLN power supply.  I have set it up as a TCPIP VISA instrument using sockets (port 5025).  It validates fine in NI MAX, and when using the VISA test panels I can write to and read from it (although I get a timeout error on the read if I specify too many bytes).  When I use the supplied instrument driver blocks in LV, VISA read commands always timeout and fail to return anything, regardless of how many bytes are specified.

    I don't think it is a VXI-11/LXI instrument, it did not autodetect and I had to use the 'Manual Entry of Raw Socket' option to set up the device.  I am sending  a termination on the write (\n), if I don't send a termination on the read it captures the read but then gives a timeout error if waiting for more bytes, if I use a termination cahracter on the read it functions as you would expect, except that it returns multiple termination characters (line or carriage feeds) in some messages so you would have to perform multiple reads to get the whole message.  (this is all in the test panels, I haven't gotten anything back using the VISA blocks in a VI)
    Given that behaviour it seems more like what you would get using a telnet terminal interface but even given that I still am confused why I can talk to it with the test panel and not using the VISA blocks in a VI. 
    Thanks,
    Stearns

  • Why don't USB stereo audio input devices work with  the iPod Touch 4G?

    The Fostex AR-4i and the Line6 Mobile In provide stereo audio input via USB on the iPads and the iPhone 4.
    Why can't these devices work on an iPod Touch 4G?

    Does the manufactur say it works with the iPod Touch?  Many accessories do not work with all three iDevices (iPod Touch, iPad and iPhone)

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • Get Windows Mobile 5 device working with Parallels USB ?

    Hi,
    I have installed windows XP with parallels and I plugged my phone into the USB port but, it detects with the operating system but active sync cannot connet to it.
    Has anyone got it working ?
    I have a HTC wizard.
    Thanks

    Thank you for the tip. I found the fix on this page: http://forums.parallels.com/thread2743.html
    It should work to get any WM5 device working.
    Hope this helps lots of you.

  • What 3TB or 4TB devices work with Linksys EA6500

    I want to buy a WD My Cloud 3TB Cloud Storage and connect it to my EA6500.  According to Cisco it has not been tested for compatibility.  This list hasn't changed in a while it seems and there are so many 3 and 4TB external storage options on the market that are not listed.
    Has anyone tested this Western Digital device?
    Does anyone have other recommendations for 3 or 4TB devices that they know work?
    Thanks!
    Compatiblity List:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=04525b6daed244c2acc4901c83f3662e_List_of_tested_US...

    There are drives that will still work even if it's not part of the compatibility list. As long as the drive is detected, then it should work with the router. But if you want to make sure, just go for those hard drives that are already tested.

  • All devices working with AEBS except one

    So I have a network with an Airport Extreme Base Station. Several devices use the network without any problems, including:
    MacBook Pro (older Core Duo model) - running OS 10.5.8
    Powerbook G4 (still kicking) - running OS 10.5.8
    Mac Mini (new, Core 2 Duo) - running OS 10.6.x
    iPod Touch
    iPad
    The AEBS is set to use DHCP, and all machines seem to be functioning fine with the network, despite various processors and OS versions. The Mini is a server that is left running 24/7, while the others connect and disconnect to the network throughout the day.
    The machine that is having network problems is a desktop PowerMac G5 (Dual 2 GHz model, running OS 10.5.8).
    The problem that I am getting is that the desktop can detect the network, but it either can't connect to the network (it times out), or it connects but doesn't get a very functional net connection. On some occasions I have looked in the Network control panel and it is given an appropriate IP by the DHCP server, but the connection is either too slow to be usable or just non-functional. Other times it just never gets a valid IP. However, one thing to consider is that there have been (very) brief periods when I have been able to connect the G5 to the network and it has seemed normal, only to fail again within a short period of time.
    I thought it was something wrong with the wireless hardware in the G5 machine, but if I connect to a MiFi instead of the AEBS, it works fine and I experience no problems with the network connection. So it does not appear to be a problem with the hardware.
    Could this be some sort of incompatibility on the network? I thought that might be, except that an machine just as old (the Powerbook G4) running the same OS version has no problems.
    Any thoughts? Thanks...

    The problem that I am getting is that the desktop can detect the network, but it either can't connect to the network (it times out), or it connects but doesn't get a very functional net connection. On some occasions I have looked in the Network control panel and it is given an appropriate IP by the DHCP server, but the connection is either too slow to be usable or just non-functional. Other times it just never gets a valid IP.
    Please try the following:
    1. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Advanced > AirPort tab
    o Under "Preferred Networks," delete the network(s) you regularly use from the list.
    2. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    3. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Advanced > AirPort tab
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.
    Please post back your results.

  • Does iPod radio device work with other headphones?

    Hello,
    I was just wondering if anyone could tell me if the iPod radio device is compatible with other headphones, because it is uncomfortable wearing the apple earbuds and i was really thinking of buying the radio transeiver for my ipod.
    It would be appreciated if someone could really help me out on this.
    Thanks alot, Brad

    Sure is, you can use anything with the standard 3.5mm plug.

  • What bluetooth device works with home stereo

    Is there anyway to connect my Imac to my home stereo via bluetooth or any other methods short of stereo cables.?
    I was hoping that there is a moldule that connects to the home stereo some way ? I have all this music on my computer and no way to play on my home speakers/stereo.
    Brad
    [email protected]

    You can't do it via Bluetooth because the Mac OS doesn't support A2DP yet which is required for streaming stereo audio over a Bluetooth connection.
    If you've got a wireless home network you can use Airport Express:
    http://www.apple.com/airportexpress/

  • Would this device work with the Live Pro?

    http://catalog.belkin.com/IWCatProdu...Product_Id=792#
    To make it wireless?

    I have a HP Officejet 6500 E709a hooked to the USB port on a Time Capsule. I am also running Lion 10.7.1. Printing from any computer on my network works. Faxing must be done at the All-in-One. To scan, you MUST hook the All-in-One to the computer via a USB cable. When in System Preferences, Print and Scan, you click on the + sign, Lion should "see" the printer and then will ask if you want to download and install the software for the printer. It is about a 100 meg download. I got the software while the printer was hooked to the Time Capsule and was accessing the printer via the wireless network.
    Steve H

  • MAX 4.5 corrupted by DAQmx 14.1 patial installation

    Hi,
    I am posting this on the LabVIEW board because I can't find one specifically related to MAX issues.
    I have a machine with two oldish USB devices working with a LabVIEW 8.2 application, with DAQmx 8.7.  OS is Windows XP.  The software started throwing up errors, and MAX (v4.5) was struggling to connect to both devices.  I was seeing error -50405.  After some research it seems that there may be some issue with the USB connection.  There was also advice to install a newer version of DAQmx, as this may have better USB fault tolerance.
    I downloaded & started to install the latest DAQmx, V14.1.  Part way through I relaised that this does not support LabVIEW 8.2, and I do not have the time or inclination just now to drag the code into V2014.  So I cancelled the DAXmx installation part way through.  Maybe this was a mistake.
    I now cannot run MAX at all.  Part way through the initialisation it crashes, and Windows wants to investigate the error.  I assume that something from DAQmx 14.1 is incompatible with MAX 4.5.
    I cannot uninstall DAQmx 14.1.  It does not appear in the list of PI software in the Control Panel - Add or Remove Software tool.  I have repaied DAQmx 8.7 several times, and MAX 4.5 as well.  I have trawled through the registry and the executable folder for MAX to manually remove anything I can find from 14.1. 
    The LabVIEW tool still works, but I cannot start MAX.  I will need to fix this in the next few weeks as the sensor calibrations are handled through MAX. 
    Any ideas?  What other information / log files would be useful to help diagnose this?  All information very gratefully received. 
    Ian

    Thanks all for your suggestions.  I had already tried Repairing various installations (DAXmx, MAX) with no change in behaviour. 
    I tried the /reinstall option with DAQmx 8.7, but this did not fix the issue. 
    I have tried to create a VI to save the configuration to an NCE file.  I get error -2147467263 Not Implemented with the Copy Config command, and when I tried the Make Report tool I get the same MAX error, so calls to the MAX API are also not working.
    I am concerned about using the Repair Database tool as I don't wat to risk losing the calibrations just now.
    Does anyone know where MAX stores the calibration data, and if this can be recovered manually?
    I am now re-installing DAQmx 14.1, so I can then fully uninstall it, and hope that it will fully remove itself from the system.  If nothing else I might get a newer verison of MAX so that I can backup all the system settings before attempting anything more drastic.
    Thanks again, and any more ideas will be gratefully received.
    Ian

  • Device not working with Log and Transfer in FCP

    I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
    The camera is question is a Cannon Legria FS20, here is a link
    http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
    I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
    Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
    How can I get it so that my device works with log and transfer?
    Thanks

    Hi -
    I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
    Log and Transfer only works with High Definition material.
    You will need to convert your video clips into a format that will work with FCP.
    I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    This application will convert your MPEG-2 files into a format that you can use directly in FCP.
    Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
    Hope this helps.
    MtD

  • I have a I Pad, which I down loaded IOS 7. I have a HP Photo smart D7460, which works within my wifi internet system. Works with all other Apple devices. How can I join the IPad?

    iPad trouble with printing on hp D7460. All other apple devices work with it wifi.

    There's a list of printers that support AirPrint, the native mechanism for printing from iOS, here:
    http://support.apple.com/kb/HT4356
    If your printer doesn't support AirPrint, HP has app that enables printing to some of their other wireless printers. Third-party printing apps such as PrintCentral are also available. All such apps have limitations, so check them out thoroughly before you pay for any such app.
    You can also route the printing through your computer. If you have a Mac, Printopia would be worth a look. Fingerprint is another option that is available for both Mac OS X and Windows system. You could also consider an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    Regards.

Maybe you are looking for

  • How do you create default Read/Write Permissions for more than 1 user?

    My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc. However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/fol

  • Generate Valid XML from pl/sql

    Hi, A new-bee here. I want to know how to generate a valid xml document. I have a schema which by the way includes two other schemas. This is the code I am using but I don't know how to make sure that I insert the child nodes in the right sequence. A

  • Access to Another Portal as External Application

    Hi, From within my Portal, I'm trying to access another one of my company's Portal as external application. So I defined the following on my Portal's External Application Login page: Application Name: XXX portal Login URL: http://hostname/pls/portal3

  • Command Line Parameters for Run Application.vi in the LVWUtil

    I am trying to use the "Run Application.vi" located in the LVWUtil.llb.  I am sending a command line similiar to this: "C:\WINXP\system32\msiexec.exe" /i "C:\qc data\ZVMS Program Updates\Application Installer\install.msi" this command line works from

  • RAW support new camera's - Fujifilm X-Pro1

    As an experienced photographer, I've chosen Aperture over Lightroom. Reason was that I hoped for a better support of new camera's & features in the Mac-world (I don't like Adobe so much). To me, it looks to be an opportunity for Apple to beat Adobe i