In ME21N,User Exit/BADI for  Defaulting  Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes  are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

Similar Messages

  • User exit -BADI for overriding Partner number in Purchase order output type

    Hello All,
    We have a requirement wherein the EDI message type will distribute the Idoc to the partner number determined in the output type of the purchase order. We are maintaining the condition record for a generic partner number in MN04 and we want this partner number with partner role SH from the condition record to be modified to the sales order sold to party partner number. We are using third party processing and hence sales order number can be fetched from account assignment (EKKN) table of the purchase order. Kindly do let me know the user exit /BADI that can be used for achieving this functionality.
    Thanks in advance for your immediate response.
    With regards,
    Joseph Anand B

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • User-exit / Badi for changin vendors(fk01/02) and customers(fd01/02)

    Hi,
    I'm looking for an user-exit or an Badi which can be used, when creating/changing a vendor or customer.
    Has anybody used it?
    Thanks.
    Regards, Dieter

    Dieter,
    See bapi:
    BAPI_CUSTOMER_CHANGEFROMDATA
    BAPI_CUSTOMER_CHANGEFROMDATA1
    and
    BAPI_VENDOR_EDIT

  • User exit/BADI for material Po text

    HI,
    can any one suggest me User Exit/BAdi for material PO text in item level in PO
    Regards

    USE ME_PROCESS_PO_CUST
    METHOD : PROCESS_ITEM
    REGARDS
    KANISHAK

  • User Exit/Badi for G/L account assignment in ME21n/ME22n

    Hi All,
    I need user exit/badi for account assignment in item details for following requirement.
    If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
    Please suggest me suitable user exit for this.

    hello,
    follow the steps.......
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u,
    santhosh

  • Request for info. on USER EXIT/BADI for FB60

    Hi,
    This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
    ]Please guide some alternative solution rather than user exit and badi.
    I dont think the following user exit and badi are used for withholding tax.
    I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
    F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002 FIDCC1: Change IDoc/do not send
    F050S003 FIDCC2: Change IDoc/do not send
    F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001 Balance Sheet Adjustment
    FARC0002 Additional Checks for Archiving MM Vendor Master Data
    FEDI0001 Function Exits for EDI in FI
    RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00 Line item display: Checking of selection conditions
    RFKORIEX Automatic correspondence
    SAPLF051 Workflow for FI (pre-capture, release for payment)
    Badi
    FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
    Every expert answer will be rewarded.
    Thanks in advance
    Cra

    Try Business Transaction Events. Transaction code BERP.
    Regards,
    Zoltá

  • User Exit / BADI for  F-02 during SAVE to update BSEG Line Items.

    Hi Experts,
    I need a User Exit / BADI for Transaction code F-02 which triggers during save to update  BSEG-SGTXT with Vendor / Customer 
    name in the Tax Line Item.This is to update table BSEG .
    Thanks in Advance,
    Nithy

    Hi,
    Do it with the BTE 00001120 (tcode FIBF).
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot, check this link. It will tell you how to do it
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
    Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

  • User exit / BADI for CO01

    Hi all,
    I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
    Thanks and regards
    Jijo

    Exit Name           Description
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • User exit/ badi for fb02 transaction

    Hi,
    what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
    payment block field for particular users..?
    Regards,
    Avi

    Following are the exits available for FB02
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)

  • User-Exits/Badis for T.Code Co01 Production Order

    Hi Friends,
    Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
    Thanks,
    Ravi...........

    These are the available user exits..
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • User exit / BADI for training and event management

    Hi all,
    Can anybody tell me if there is any user exit / BADI for training and event management module?
    Thanks & regards,
    LOI

    Hi
    BADI's for Training and Event Management
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
    HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
    HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
    HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
    HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
    HRTEM_READ_OBJECT      Customer Enhancement: Name Format
    RHPV0001 Customer      Enhancement for Additional Checks for Booking
    Enhancemnet Spot:
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    ~~~Ganesh Kumar K.

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • User Exit / BADI for Transaction IW31 to create a POP-UP.

    Hi,
    I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

    Hi!
    In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
    If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
    Regards
    Tamá

  • User exit / BADI for billing block in VL01n

    Hello Techies,
    Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?

    Just to add more details:
    Our program sets memory id field.
    We call transaction VL01N.
    program clears memory id field value.
    all this happens in loop for number of deliveries.
    In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
    From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
    what could be the reason for sy-subrc for import memory id is not equal to 0 ?
    can it be because of number of deliveries created at a time where memory id export / import is causing problem?
    we are not able to replicate this issue in Dev/Quality systems.
    Thanks & Regards,
    Sachin

Maybe you are looking for

  • Drag Files from iTunes to iOS apps disappeared

    I'm using iTunes 12.0, iOS 8.1.1, and Windows 8.1.  Previously when my iPad was attached to the computer via USB there was a panel in iTunes that would allow me to access files on the computer and copy them to the iOS apps on my iPad which supported

  • Checking NWA Java EE application logs

    Hi I got an issue with Seeburger SFTP adapter and i am trying to check the Log trace files in NWA under systems -> Start and Stop-> Java EE Applications. When i select the application and click logs corresponding to that then i get this message inste

  • Budget is prepared by respective department on basis of material required

    Hello All I had a doubts and need help If budget is prepared by respective department on basis of material required in the next year. Then how in sap we will able to track in sap. Budget can be plan on fund center and commitment item, when client mak

  • Inserting WEBI into Live Office with Bex query

    I have created a WEBI connected directly to a Bex query in BI 4.0.  When I refresh the WEBI, I am prompted with the Bex variable and the data is refreshed correctly.  I added that WEBI to Live Office, but it does not prompt me with the Bex variable. 

  • How do i delete photos that have been downloaded from my computer

    Ok so i only want to delete 1 photo and the photo had no delete button so what do i do?? It was downloaded from my camera fo my computer to my ipad and the photo folder in my computer has gone missing at a great time- not So how do i delete it??