In ME22N PO display is appearing

Hi Experts,
Issue which i have observed is as follows.
One of the user have entered ME22N transaction to change PO.Upon entering this transaction ME23N (PO display ) screen is appearing.After clicking on display / change (F7) icon he is able to edit PO.We have checked in SU53 but could not found any auhorisation error.
Would like to know issue due to which M23N screen is open after entering ME22N transaction and how to rectify this issue.
Thanks & Regards

If you leave your home in the morning without making the bed, then it is still not made if you come home in the evening.
the same design is with SAPs purchasing transactions.
If the user started ME22N, change a PO and changed the activity to Display and leaves the transaction, then the next time he comes back into ME22N it will be in Display mode.
So just change the activity in ME22N back to change, change a PO and save and leave the transaction and next time you will execute ME22N it is in change mode.
The more serious SAP explanation can be found in OSS note 212447 - ME22N: Activity category

Similar Messages

Some texts do not display correctly (appear as squares)

Since I got my Z10 some of the texts everywhere else on the phone do not display properly. They appear as squares. Any help?
See the image attached below for more details.

You would have to contact the website developers and get them to check their site on mobile devices and update the code where necessary.
Looking at the source code of that page, it looks like very old, quite convoluted and rather inefficient JavaScript that powers the menu.
There's certainly no reason why a web developer couldn't make such a menu compatible with touch screen mobile devices. Plenty of similar menus work just fine.
I guess whoever developed it hasn't checked it on modern web browsers and mobile devices for some time.

Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"

I have installed IPCCX 7.0 in VMware
I have finished the installation without any error.But after installation when I tried to open the Admin page from
Start > Programs > Cisco Unified CCX Administrator > Application Administration
Getting error message "Page Cannot be displayed".
From troubleShooting Guide found that these services should be running
Check that the CRSJavaAdmin.exe is running (in Windows Task Manager).
World Wide Web Publishing service.IIS Admin service
Can anyone tell me How to run CRSJavaAdmin.exe ??
Thanks in advance.
Reena

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

DVD or CD won't display or appear on hard drive list of devices

I insert a new CD-R or DVD-R I get no response or recognition that it's there--no icon appears on the desktop or anywhere else I can find. The only way I've found to eject one is to go open Disk Utility and Eject. In Disk Utility the only option I'm given is to erase (these unused discs). Please assist; I'll gratefully receive suggestions!

There's no indication of a CD in the Finder's sidebar or on it's main screen, which shows a number of folders labeled Music, Library, Desktop, etc. which in turn have no CD DVD icons inside; there's no General tab in the Finder's preferences. Opening the CD & DVD pane of System Preferences yields a list of 5 question of what to do when a CD or DVD is inserted, the first two for blank discs are set on Open Disc Utility--should a different choice, such as Open iDVD, Finder, Another Application be made?

Webforms - display items appearing as black

Hi,
I need somebody's help. When I navigate from a custom built form to a third party application form all display items in the third party appl. form are blackened out.
This state persists throughout the session for all third party appl. forms.
I initially thought that it was a global value which
I had not set when navigating from custom form to other form.
I've spoken to the company that built these forms and they
state that they do not set any visual attributes etc. programmatically.
Their visual attributes on the form is default, foreground/background colour= <unspecified>
Have I missed something in my formsweb.cfg?
I have already set:
lookandfeel=generic
readOnlyBackground=automatic
darkLook=false
in the config file.
PLEASE HELP.
Thanks
Dave Molloy

Hi Sheetal,
For this you need to change your XMl config file. Please use below code
<DisplayAttribute name="subject" type="link" width=""
sortable="yes" format="default" actionRef="viewDetail" referenceBundle="subject"
hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
To get Hyper link we need to define the type="link" and when we click on hyper link
some action gets executed so we define the actionRef="viewDetail"
Regards,
Piyush

How do I correct my display which appears like a photo negative (='s colors reversed)

I recently Uniblue's Registry Booster and System Tweaker [bad idea!] . Registry Booster claims to have corrected 150+ errors. But it appears to have also utterly disabled my favorite browser [Google Chrome] and makes Mozilla Firefox appear like a photograph negative.

Thanks Terence. I know about that in iPhoto already. I use it often. However, that is not an option when creating a book. When you click on the photos button in the bottom right corner when creating a book, it shows the photos but there is no "info" selection. The only way I find out the date is to drag the photo into the book, then go back and hover over the page number it was imported to and hope eventually the date shows up. If it's not the date for the chapter I wanted (as my chapters are divided by months), I then drag it back out and try again until I find a photo that does have that date. It's taken hours and is different from previous versions of iPhoto where I have created books before. This is iPhoto 11, trying to create a hard bound book.

div id="myEventWatcherDiv" style="display: none;" appearing everywhere

Hey guys,
I have this strange code appearing on many pages in my site....why is that? Anyone have any idea?
Thanks!

Hey JoeFix,
This issue seems to be caused by a browser plugin. Please have a look over this post here and if I'm not wrong it should solve your problem as well.
Kind regards,
Cristian

Attached pictures will not display only appearing as symbols. Can only be viewed on downloading.

Sent and received attached pictures will not displw as a slide show or individually in mail.

Thanks again for your reply. I'm not sure what a "cid" is.
I've sent four images the first of which is from a Canon camera which prefixes with a camera Id.
2 and thre are prefixed _ or P which indicates they are written in Adobe RGB or SRGB 1968 respectively.
The fourth has had the "cid"s removed.

I am unable to get the HUD display to appear...help

My first use of my new CS5 is was to try the new HUD color picker. I picked a brush tool...held down shift+alt+right-click and went of the image and held it. Nothing happened. I just get a cursor with the eye-dropper and a plus sign onder it and a little circle above it. I watched it on Lynda.com. but was unable to replicate what I saw. I tried it on my laptop and my desktop. Both...nothing. I set it to both wheel and strip in preferences.
Need help with this...thanks.

I tried to set this in preferences...but it will not allow me to with the laptop. I upgraded the drivers to the desktop and it works there...but the Fujitsu T5010 does not have the openGL capabilities needed.
Thanks for the input. Sure appreicate that.

How to keep wbs element field in display mode in me22n?

Hi all,
Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?

Hi Dhruv,
You can implement BADI ME_PROCESS_PO_CUST and implement the method FIELDSELECTION_ITEM.
I have pasted the SAP documentation available below. Please try this.
Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
At header level FIELDSELECTION_HEADER_REFKEYS
Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
At item level FIELDSELECTION_ITEM_REFKEYS
Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
Documentation for BAdI method FIELDSELECTION_HEADER
Documentation for BAdI method FIELDSELECTION_ITEM
Special Field Selection Item
Functionality
The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
Parameters
The following parameters are available:
IM_HEADER - Document header
The interface reference is of the type IF_PURCHASE_ORDER_MM.
IM_ITEM - Document item
The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
CH_FIELDSELECTION - Fiele selection table
By making changes to this table, you can influence the display properties of a field.
This table consists of value pairs <METAFIELD|FIELDSTATUS>.
The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
Through this abstraction, reference can be made to business contents on a uniform basis.
Standard metafields are defined in the type group MMMFD.
The field selection status has four possible instances:
'-' Field is suppressed
'*' Field is purely a display field
'.' Input field
'+' Mandatory field
Notes
Under no circumstances make any changes to the database within this method. On no account use Commits.
For WBS element the meta filed no is 512.
mmmfd_wbs_element TYPE mmpur_metafield VALUE 512.
In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
DATA: l_persistent TYPE mmpur_bool.
l_persistent = im_ITEM->is_persistent( ).
READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
IF sy-subrc IS INITIAL.
<FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
ENDIF.
Try this, it should work.
Regards,
Savitha
Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM

How do you get the display message to appear only one for each case?

Hi Friends,
I am here with another question....
I have built a VI that should contain 6 checkboxes, when a particular checkbox is selected by the user it should display a message to the user of which checkbox is checked.
My problem is: when I select one of the checkboxes the display message appears continously one after the other, even when the OK button is pressed.
Can anyone help me please??
Solved!
Go to Solution.
Attachments:
checkbox - clusters Folder.zip ‏14 KB

Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
checkbox - clusters_MOD.vi ‏23 KB

Determine Purchase Order in ME23n/ME22n

Hello.
Question from user. In transaction ME23/ME22 firstly selection screen appear and you could choose exact PO for display/change. Wjen you use ME23n/ME22n trs the last (or last used don't know exactly) PO displayed and only after that you able to choose the Order you want to display/change.
Is it possiable to have selection screen first in the ME23n/ME22n without displaying default PO?

>>you can use custom developement for this.
You mean user exits? Do you know what user exit I can use for that?

Problem with display of Chinese, Japanese, and Korean business partner name

Hi All,
I'm trying to understand how to get GTS to properly display the names of the business partners that are in Chinese, Japanese, or Korean.
I have set my SAP gui localization as follows:
- Select the Customize Local Layout, then Options, then the |18N tab,
and check the Activate Multibyte Function box
- Select the Customize Local Layout, then Character Set and check
Unicode and Simplified Chinese
In the source R/3 system for these partners, if I set my localization to the right language, the business partner's name and address would be displayed correctly in the C/J/K character sets when I select the appropriate version in International Version of the address.
However, in GTS these names/addresses would just appear as nonsensical characters (like "·ÉÀûÆÖÕÕÃ÷µç×Ó£¨ÉÏº££©ÓÐÏÞ¹«Ë¾").
For example, if I do a look up of a known Chinese BP by number, in the seach results window the Description field of that BP would just be garbage, but if I put the cursor over the Description field, then the correct Chinese display (matching what is in R/3) would appear for as long as the cursor is over that field. This indicates that the data was transferred correctly from R/3 to GTS, but some how the display does not default to the right character set.
If I select that record, the resulting detailed display would also have garbage as the Name and Address. However, here putting the cursor over the fields still do not bring up the correct character displays, and I have found no way to get the correct displays to appear.
Does any one know of a way to get the displays to show correctly in GTS?
And can anyone explain why putting the cursor over the Description (in the BP search results window) would let the correct display pop up?
Greatly appreciate any insight anyone can provide.
Thanks,
Rex

Hi Rex - As per message - this looks to be an issue for BC-I18-UNI and not the GTS application:
For general information purposes - last response from BC-I18-UNI development via oss message:
"However, from readind the message, I believe I understood the reason for
the described effect. I assume GGT is a non-Unicode system? If yes, this
is my idea:
The data stored in the BP tables, e.g. for number 2555442 have been
entred manually, probably within a session using English as logon
language. In this case the data are stored with a Latin-1 codepage. This
means the stored data are actually Latin-1 data, not Chinese. By
switching the font at front-end side to Chinese, the characters appear
as correct Chinese, although they are still Latin-1.
It is possible that different GUI components show different effects in
this context, as the internal font switching mechanisms behave a bit
different in different components, e.g. control based components are
different from normal Dynpro-based fields.
To have correct Chinese data, you need to logon with language Chinese.
This holds for all non-Unicode systems. On Unicode systems, the logon
language is arbitrary."

Cannot get external display to show image

Hi, I've just bought a 13" MBP and I'm new to the Apple forums so I apologise if there is already a thread for this (I haven't seen one so far).
I bought the MBP from my local Apple Store along with a case and a mini-DVI to VGA adapter to connect the MBP to my 20" Samsung 2032MW TV/monitor. That night I connected the two and they worked fine (plug and play), however two days later I tried again and my Samsung screen stays black and goes to standby. I have performed a self check on the monitor and there are no issues there so I presume there is an issue with settings on the MBP. I did find a thread that mentioned the graphics performance settings in the Energy Saver menu but I don't seem to have those options available (http://picasaweb.google.com/lh/photo/SduYqB9Smn0DvzqjqIg-JAXluH7Dnp9rqlqjc2UNeXg ?feat=directlink and http://picasaweb.google.com/lh/photo/NO6JMa9JcuIHRhCDED1QzgXluH7Dnp9rqlqjc2UNeXg ?feat=directlink).
Any help would be greatly appreciated
Aaron

Sorry! Yes I've been into the Display settings and tried Detect Displays and Gather Windows.
This is how my Display settings appear once I have connected the external display (MBP screen flashes blue):
http://picasaweb.google.com/lh/photo/-qvpsvxre1dSRea6D3IdwgXluH7Dnp9rqlqjc2UNeXg ?feat=directlink
Thanks for the reply.

OBIEE 10G Embedded Image not displayed on PDF

Hi
We have some embedded images (source on network share or on the webserver) on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
Is there a known bug that images can't be printed on dashboard pages or do we have to embed them different?
Thank you

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

In ME22N PO display is appearing

Similar Messages

Maybe you are looking for