In Media Source/Zen Xtra 30, track listed as "0", but the id3 tag is fi

Is their some way to resolve this? I have both fully updated.

No, there was definitely a problem with the track tag in mp3 files and it seemed to be OK with 3.30.2. here's the thread:
http://forums.creative.com/creativel...ssage.id=82657
The solution is to upgrade to 3.30.2 and then re-import the offending files into MediaSource.
PBMessage Edited by PeeBee on 09-05-2005 09:09 PM

Similar Messages

I have had two instances of having a downloaded album "scrambled" while playing on appletv, I.e. the track listing remaining correct but having the wrong songs play. Once this has occurred the album does not play correctly. Any help with this issue?

I am having problems with Apple TV scrambling albums while playing from iTunes. The track listing remains correct but the songs play out of order and not all of the songs seem to in place, I.e. a song that played previously under one title will play as a different title. Any thoughts or help? Thanks.

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

The track listing is incorrect on the REM Warner Bros. Box Set. However, no-one appears to be doing anything about it. Do iTunes or WB even know it's incorrect? Am I the only one who's noticed?

the track listing is incorrect on the REM Warner Bros. Box Set. However, no-one appears to be doing anything about it. Do iTunes or WB even know it's incorrect? Am I the only one who's noticed?

Don,
To be a good citizen, you may wish to contact Warner Brothers and alert them to the error. That will allow them to verify it, and advise the iTunes Store (as well as other music download stores) of the corrections.
You also have the option of advising the iTunes Store directly via their feedback page, but be aware that Apple is unlikely to take a fan's input to overrule info that they received from the label. So contacting WB is probably more effective.

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input moniter".

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input monitor".

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4 I don't have iTunes Match.

Select all the songs and then Advanced -> Convert ID3 tags.
http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

Just got the 5c and my music list are here but the music isn't. It says I have to download them! Buy doing this does it mean I have to pay for them again??

Just got the 5c and my music list are here but the music isn't. It says I have to download them! Buy doing this does it mean I have to pay for them again??

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Creative Media Source won't display tracks on Zen Mi

When I hook up my Zen Micro, Media Source displays the music on the?Zen Micro in folders named by artist. Sub folders contain albums by that artist. The next sub foolders display track names. Can I change the settings so all of my tracks are shown as one list when I first choose the Zen Micro.

I have been chatting to some others and it appears that it isn't a WMP problem. Having seen a thread re: Zen synch, I tried to play the music through the Creative player but the Zen is not detected on that either.
In Windows XP I can see the Zen when I dock it, and I can see it in WMP, but it is not visible in the Creative Player?
Any ideas, is it a case of uninstalling the Creative software?

Creative Media Source & Zen Visio

Hi, I've lost my CD Files of the Zen Vision M, and I'd like to reinstall all the software.Where can I download Creative Media Source 5 or the CD Software?
ThanksMessage Edited by xupi on 0-20-2006 0:07 AM

Hi,
You should definately take a look at this case on our Knowledge base http://uk.europe.creative.com/support/kb/article.asp?l=3&sid=9287. You can use the wizard at the bottom "Start Troubleshooting".
Hope this helps,
John

Creative Zen Xtra Firmware Failure/Reload OS- Here's the how to fix

I know all of you must be excited just reading the word Fix.
Alright here is a very simple guide how to get that "upgrade button" back on the firmware upgrade software.
Considering that you have reached this point because you tried and failed to load firmware 2.0.3.0 because creative sucks.. well i have more bad news for you.. the only way that players is going to work now is you have to retry that crappy firmware and hope it'll work once.. so have it ready on your desktop. Remember you can't revert to old firmware.
OK, now the most important thing is requirements: You need to have all of these requirements:
.Win XP SP2
2.Window Media player 0 with all the updates (go to microsoft and update it!)
Now you need to go to Device Manager, while your player is connected to your PC and find that MTP (ussually all the way at the bottom of the list). higlight it and update it's drivers (requires internet connection)
After doing that, you would have to Delete all of your USB Controllers. It is not messed up, but it is the only way for creative crappy software and player to re-connect.
Now when your done go to that firmware update and the Upgrade button should be Lit up once again.. and hope this time the upgrade works.. if not. well repeat all steps again.
Note: Be sure the Battery is FULLY charged, plugging it to a power outlet doesnt do the trick. If the battery is to low the firmware will say it wont proceed because of battery. Another creative dumbass programming.

On your desktop.
. Right click My Computer.
2. Click on Hardware Tab
3. Click Device Manager
4. Click Uni'versal Serial Bus Controllers +
5. Right Click Each of them and Click Unninstall
6. Restart your computer (press Windows button and use keyboard and select Shutdown)
7. Windows will automatically re-install USB drivers. Make sure Nomad Is not Connected
8. Go Back to Device Manager, and plug in your Nomad. Window will detect it and place it under MTP Devices.
9. Creative Mediasource Will not Detect it.
0.Right Click MTP device and chose Update Driver.
Now go to the firmware upgrade software you downloaded. Must be the latest version, the playfor sure version.
Click the upgrade button.
To use media source, you have to download the playforsure plug in for Play for sure firmware.
Without it, you can only use window media player 0. If you dont have window media player 0, you have to download it.

Tracks originally ripped in iTunes loose ID3 Tag then become corrupt?

Gurus....
I'm tearing my hair out... After investing in a Soundblaster Wireless Media device I started to copy the 6000 odd mp3's ripped from CD's and Vinyl listed in iTunes 4.7 (I have an iPod so need to maintain both libraries) to the Media Organiser. Many of the ripped CD's (possibly from later editions of iTunes) appeared to have no Tag information (Artist, Album and genre were 'unknown') I started to manually readd some of this but then found that the tracks were not playable in either location!!! iTunes and Media Centre behave like the tracks doesn't exist and skip straight passed them.
I'm guessing it's an iD3 incompatibility and was wondering if anybody out there knew what the problem was and if there is any way around this.
Thanks in advance
Wayne

WayneMar,
I had a very similar problem. Ripped tunes in ITUNES, added them to a library in Musicmatch. Everything came up as 'Unknown Artist'. Tried to fix the tags in Musicmatch and got a dialog box saying the headers were corrupt.
After a little trial and error went into ITUNES and used the 'Convert ID3 Tags' feature to change the tags to V2.3. Musicmatch detected the change and picked up the tags.
The 'Convert ID3 Tags' feature is under 'Advanced' on the top bar or available by right-clicking a tune.
Hope this helps,
Leebob

Zen Vision:M track list

I looked through other threads and didn't see an exact answer to this.
My Vision:M wants to list all songs alphabetically. Even when I play an individual album without using playlists, the songs on each album are listed alphabetically.
Can this be changed? I'm going to have to return it if it can't.
Thanks - Eric

Even when I go to the album and hit the play button it still doesn't play them in order. The strange thing is in the upper left corner while it plays it has numbers like /2, 2/2, etc. so it knows the order the songs came on the album it just doesn't want to play them that way for some reason. So is there a way to tell it to play them in order by those numbers?
Also, does anyone else find the touch pad maddening to use? I think I just accidentally bought some music I didn't want because I was having trouble controlling the touch pad.

Wireless track pad is paired but the pad does not respond when using my finger

my wireless apple track pad is paired and bluetooth is on however the pad does not move the mouse when using my finger, what should i do?

Hello MWinn1,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot the issue with your Magic Trackpad. Also please make sure your batteries are charged.
Trackpad or Magic Trackpad is jumpy or erratic
http://support.apple.com/kb/TS1449
Take care,
Alex H.

HT204406 iTunes Match is not working on my iPhone 4S after installing iOS 6. I finally see a list of artists, but the songs are all empty and will not play, and no play lists are present.

iTunes Match is not working after the iOS 6 install. All music that was previously downloaded is gone. When the "Music App" is opened, I see a picture of a cloud, and a progress bar that goes nowhere. Then it goes away. No playlists are present. It shows artists, and albums, but all songs are empty. Nothing plays.
Is there a fix for this, or are the Apple Servers simply totally overwhelmed, and this is a matter of being annoyed and patient until it finally connects.
Thanks!

Same issue for me.
Some further peculiar things I noticed:
Directly after updating to iOS 6 I had to switch on iTunes Match again (iPhone settings). Then I realized that my music was gone (as described above).
Under settings -> usage one could see that the memory space was still occupied by the huge music library (i.e. there where only 9 of 64 GB free). This changed after several hours. Now there are only 9 GB used, the rest is free. So the library is really gone.
Since then my iPhone continuously downloads some unknown data from the internet (even if all apps are closed and I deselect the use of mobile networks at the several menus in the settings). All apps are closed. The iPhone gets hot and downloads something. It downloaded nearly 400 MB in the last 48 hours via mobile networks. (I got a flatrate, so I don't really care about the data.)
Does anyone know what this means? Thanks for any help!

Media source webupd

I tried to install the web update of media source, version 3.30.2 for my zen micro, but it didn't works. I uninstalled all components (micro, media source) from my system and installed it again, but the web update won't work. Before and after the new installation the windows installer (or what ever) search for installed components and find nothing and crashed so i have to reset the computer. Creative systeminformation tells me all components are installed. Also the software update-function didn't work since some time. In any other way my media source 3.0.09 worked fine, but i had downloaded the huge update and i want to use it. Someone an idea what i can do?

Thanks, but I had done what you write at the beginning of the hole process, but nothing worked. I had delete all creative keys in registry after uninstallation. Then I installed the original version of the creative cd and run the update without success. The problem is, that i can never update my media source in future, i think.

In Media Source/Zen Xtra 30, track listed as "0", but the id3 tag is fi

Similar Messages

Maybe you are looking for